Named Properties – Arma 3

From Bohemia Interactive Community
Revision as of 20:11, 18 December 2018 by .kju (talk | contribs) (Created page with "Category:ArmA: Modelling ===Note=== This page reflects the Arma 3 v1.88 state. ===See Also=== Map Symbols This appears to be an out of date ArmaOne reference doc b...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Note

This page reflects the Arma 3 v1.88 state.

See Also

Map Symbols This appears to be an out of date ArmaOne reference doc but still has important info

Named Properties

Named Properties can be set in Object Builder. If you don't see this, you must first active the Named Properties window under -> Window -> Named Properties, or simply press Alt+P.

aicovers

Disables the object for AI cover search. Only relevant for terrain objects.

Usage in LODs:

  • Geometry LOD

Default value: 1

Possible values/Values found in BI A3 models:

  • 0
  • 1

armor

DESC-TODO

Usage in LODs:

  • Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models: [1-15000]

autocenter

Some model classes are placed according to automatic object center (cars).

This property sets that position to 0.0.0 from .p3d file will be used. It is often used for proxies.

Usage LODs:

  • Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models:

  • 0
  • 1

buoyancy

DESC-TODO

Usage LODs:

  • TODO

Default value: TODO

Possible values/Values found in BI A3 models:

  • 0
  • 1

canbeoccluded

If it is set to 0, the model will be drawn even if it normally would be culled away by occlusion culling. ie. the view geometry is completely hidden behind another objects view geometry.

// Enables conclusion via other objects. value 1 is default. value 0 could be used for large objects that also require alot of ressources to load.

Usage LODs:

  • Geometry LOD
  • View Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models:

  • 0
  • 1

canocclude

Objects hidden behind view geometry are normally not rendered by engine. Unfortunatelly, some objects like trees, have many "holes" in their body, so if object will not be rendered behind tree, it will dissapear and it won't be visible.

Using canocclude = 0 property will prevent this undesired effect from happening.

// Switches off occlusions, used for objects which cannot act as occluders because their view geometry is not representative of their real shape, like foliage, or are too small to be noticeable occluders.

Usage LODs:

  • Geometry LOD
  • View Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models:

  • 0
  • 1

class

Derives how an object fits onto, or into, the terrain surface.

class affects object behavior, simulation, destruction, and namesound. With extra considerations for class=house.

Note: a '*' means that class might require a Land_xxx config class


Usage LODs:

  • Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models:

  • breakablehouseanimated
  • bridge

// There is no geometry lod. class= should be in 1st (and only) resolution LOD of the model.

  • building * (verify)
  • bunker (verify)
  • bush (verify)
  • bushhard
  • bushsoft - for bushes that bend easy in slight wind
  • church - clock
  • clutter
  • fence * (verify)
  • forest
  • house *

// Required for *any* animations to work including ladders, doors, and attendant= (cfgVehicles). // "house" also causes game map to show displayname. Note that this behaviour is slightly different to an in-game model. // The wrp model does not respect the accuracy= setting of the config and will show the name through to actual game play.

// There is no geometry lod. class= should be in 1st (and only) resolution LOD of the model.

  • ruins (verify)
  • streetlamp * - pre A3 (?) lights at night *providing* a suitable Land_xxx cfgNonAIVehicles class has been provided.
  • thing
  • thingx
  • tower
  • treehard
  • treesoft - for trees that sway longer in both direction
  • vehicle
  • wall (verify)

Unclear:

  • fuelstation

damage/dammage

Defines what happens to object after it is destroyed.

Please note that armor value can be set via config.cpp.

Killed eventhandler defined in config.cpp will also work for map embedded objects.

Usage LODs:

  • Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models:

  • building
  • engine - object will explode upon destruction
  • no - no visual change will be made when object is destroyed
  • tent - object will collapse
  • tree - object will tilt
  • wall - object will fall over when destroyed
  • wreck

Unclear:

  • bunker
  • bush - object will crush
  • house
  • fence - object will fall over when destroyed

destroysound

DESC-TODO

Usage LODs:

  • TODO

Default value: undef

Possible values/Values found in BI A3 models:

  • treebroadleaf
  • treepalm

drawimportance

Some objects are more important than others. For example undergrowth in jungle is really important only on near distances.

This is a simple multiplier of estimated area of the object on the screen. When using small values, objects disappear sooner, because they are regarded smaller on the screen. This value affects only when object disappear, It does not affect LOD determination.


Usage LODs:

  • Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models: 0.2 [0.001f, 10000.0f]

explosionshielding

DESC-TODO

Usage LODs:

  • TODO

Default value: TODO

Possible values/Values found in BI A3 models: [0.05 - 0.1 - 3 - 10 - 20 - 100 - 1000]

forcenotalpha

Some models with much alpha textures on their surfaces were considered as alpha objects and therefore were rendered in a special pass where it was not possible to cast shadows on them. There is a new named property (in geometry LOD) using which you can force the whole model not to be considered as alpha model and shadows will be cast on it therefore.

Negative impacts of such solution: Various alpha sorting artifacts may appear on alpha blended parts of such models. It will depend on particular situations if the effects will be bearable or not.

Usage LODs:

  • Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models:

  • 1

frequent

Marks objects that are placed in big amount using instancing.

Usage LODs:

  • Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models:

  • 1

keyframe

Marked models that are animated by keyframes stored in .p3d.

Usage LODs:

  • Resolution LODs

Default value: TODO

Possible values/Values found in BI A3 models:

  • 1

viewdensitycoef

AI - detection through semi transparent objects.

Coef to hardcoded view density:

  • default: -2.302585093f
  • hardBush: -4.605170186f
  • ForestPlain: -0.024079456087f

Usage LODs:

  • Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models: [0.1 - 10 - 10000]

loddensitycoef

Determines how fast LODs are being switched. 0.1 means LODs will be switched very fast, 100 there will be barely no LOD switching.

Usage LODs:

  • Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models: [0.45 - 0.5 - 0.75 - 1.25] [0.001f, 10000.0f]

lodnoshadow

This property will force the engine to skip given LODs with this property set to 1, while calculating model shadows.

You can use it to force the shadow to be cast only by the selected LOD. Use it in any LOD with 300+ faces, as they will NOT cast shadow in game anyway (this will speed things up a bit).

Usage LODs:

  • Resolution LODs

Default value: TODO

Possible values/Values found in BI A3 models:

  • 0
  • 1

Everything >0 means true. So technically the other values are valid, but they don't mean anything beyond 1.

map

It declares an appropriate icon to display on the in-game 2d map. Only relevant to objects (such as structures and vegetation) that are intended to be used in a wrp.

Usage LODs:

  • Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models:

  • building - shows greyed rectangle
  • bunker
  • bush
  • busstop
  • chapel
  • church
  • cross
  • fence
  • FOREST (verify)
  • FOREST BORDER (verify) - only seen in OFP?
  • FOREST SQUARE (verify) - only seen in OFP?
  • FOREST TRIANGLE (verify) - only seen in OFP?
  • FOREST_LOD1 (verify)
  • FOREST_LOD2 (verify)
  • fortress
  • fountain
  • fuelstation
  • hide - object will not be displayed on the map, equivalent of not declaring a map= at all. Typical for streetlamps.
  • hospital
  • house - shows black rectangle and displayName= on mouseover in Mission Editor)
  • lighthouse
  • main road
  • power lines
  • powersolar
  • powerwave
  • powerwind
  • quay
  • railway
  • road
  • rock
  • ROCKS (verify)
  • ruin - nothing to do with bi's inappropriately named ruins classes, which are rubble, not ruins. This shows a ruin icon.
  • shipwreck
  • small tree
  • smalltree (verify)
  • stack
  • tourism
  • TOWN_LOD1 (verify)
  • track
  • TRAIL (verify)
  • transmitter
  • tree
  • view-tower
  • wall
  • watertower

mass

DESC-TODO

Usage LODs:

  • TODO

Default value: TODO

Possible values/Values found in BI A3 models:

  • 0
  • 0.2
  • 0.5
  • 1
  • 5
  • 7
  • 100
  • 2007
  • 92079
  • 100000

placement

Assigns specific deformation according to the terrain shape map surface

Usage LODs:

  • Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models:

  • slope - the model is SKEWed according to the terrain shape, vertical lines remain vertical. Better than vertex property “Keep height “ in many cases
  • slopez - variants where the transformation counts with landcontact defined points (1-3)
  • slopex - variants where the transformation counts with landcontact defined points (1-3)
  • slopelandcontact

Unclear:

  • vertical - added for RADAR station (CHANGELOG 1.05 - 1.06)

prefershadowvolume

Choose which shadow casting technique will be used.

Usage LODs:

  • Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models:

  • 0 - Shadow Buffer
  • 1 - Shadow Volume

sbsource

Which LOD will be used for shadowbuffer casting. If it is not set and shadow=hybrid is present, resolution LODs are used.

Usage LODs:

  • Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models:

  • explicit - use special SB LODs <11000,11999> (Shadow Buffer?)
  • none - do not render anything
  • shadow
  • shadowvolume - use SV LOD
  • visual - use resolution LODs

https://github.com/dedmen/armake/blob/66f5646f6ca756a436c474c9e395010c0a4e56e3/src/p3d.cpp#L2613

shadow

DESC-TODO

Usage LODs:

  • TODO

Default value: TODO

Possible values/Values found in BI A3 models:

  • hybrid

https://github.com/dedmen/armake/blob/66f5646f6ca756a436c474c9e395010c0a4e56e3/src/p3d.cpp#L2619

Basically it's just either "hybrid" or whatever else or nothing. So technically everything is valid, things that are not "hybrid" just mean undefined.

shadowlod

DESC-TODO

Usage LODs:

  • TODO

Default value: TODO

Possible values/Values found in BI A3 models:

  • -1 (undefined)
  • 10
  • 100

any 32bit signed integer. Negative values besides -1 are invalid though. -1 means undefined. They are the numbers of the shadow lod's as a integer. So it should have to match up with a existing shadow lod.

shadowvolumelod

DESC-TODO

Usage LODs:

  • TODO

Default value: TODO

Possible values/Values found in BI A3 models:

  • -1 (undefined)
  • 10

any 32bit signed integer. Negative values besides -1 are invalid though. -1 means undefined. They are the numbers of the shadow lod's as a integer. So it should have to match up with a existing shadow lod.

shadowbufferlod

DESC-TODO

Usage LODs:

  • TODO

Default value: TODO

Possible values/Values found in BI A3 models:

  • -1 (undefined)
  • 1000
  • 1010
  • 1500

any 32bit signed integer. Negative values besides -1 are invalid though. -1 means undefined. They are the numbers of the shadow lod's as a integer. So it should have to match up with a existing shadow lod.

shadowbufferlodvis

DESC-TODO

Usage LODs:

  • TODO

Default value: TODO

Possible values/Values found in BI A3 models:

any 32bit signed integer. Negative values besides -1 are invalid though. -1 means undefined. They are the numbers of the shadow lod's as a integer. So it should have to match up with a existing shadow lod.

shadowoffset

DESC-TODO

Usage LODs:

  • TODO

Default value: TODO

Possible values/Values found in BI A3 models:

  • 0.001
  • 0.02

transparent

obsolete, no purpose now (verify)

Usage LODs:

  • TODO

Default value: TODO

Possible values/Values found in BI A3 models:

  • 1

xcount

Used by animated flags - obsolete (verify)

Usage LODs:

  • Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models:

  • 6

xsize

Used by animated flags - obsolete (verify)

Usage LODs:

  • Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models:

  • 0.6534
  • 0.99
  • 1.3167
  • 1.5

xstep

Values for movement settings, they are generated automatically when you optimize animation.

Usage LODs:

  • Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models:

  • -0.025455
  • -0.011045
  • -0.000267
  • -0.000161
  • -0.000002
  • -0.000000
  • 0
  • 0.000000
  • 0.000001
  • 0.000020
  • 0.000144
  • 0.001785
  • 0.008392
  • 0.112641

ycount

Used by animated flags - obsolete (verify)

Usage LODs:

  • Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models:

  • 5

ysize

Used by animated flags - obsolete (verify)

Usage LODs:

  • Geometry LOD

Default value: TODO

Possible values/Values found in BI A3 models:

  • 0.34848
  • 0.528
  • 0.70224
  • 0.8
Retrieved from "https://community.bistudio.com/wiki?title=Arma_3:_Named_Properties&oldid=114098"