Soldier Protection – Arma 3
Template:Stub The current state of the documentation only covers the basics of the implementation, some information might be inaccurate. Additional details will be added soon.
General
This system allows the definition of the protection level of various hit-points (head, face, neck) in a given piece of equipment (I.e. Headgear, vest). To do so, the system supports the following hit points: head, face, neck, chest, diaphragm, abdomen, pelvis, arms, hands and legs.
Each equipment item which should have a certain level of protection should have the necessary hit point configured (see examples bellow)
For the story, the old system was able to cover only one hit-point, as shown hereafter:
 |
 |
class ItemInfo
{
hitPointName = "HitBody";
armor = [0,∞];
passThrough = [0,1];
};
|
class ItemInfo
{
class HitpointsProtectionInfo
{
class Chest
{
hitpointName = "HitChest";
armor = [0,∞];
passThrough = [0,1];
};
class Diaphragm
{
hitpointName = "HitDiaphragm";
armor = [0,∞];
passThrough = [0,1];
};
};
};
|
Implementation
As described hereafter, various properties (hitpoint) need to be defined in the config to fully benefit from the soldier protection.
Unit base class
The following code is example of a custom man base class containing every config parameters relevant to the soldier protection. Its values represents the state of the soldier protection without any equipment, each piece of gear can increase the protection level of one of these hit points, provided it is configured. This class is just here to help you understanding the relation between the configuration of a gear item and the base class.
Note: Good practice is not to edit or update the base class but create a new class which inherits from the vanilla class.
class CfgVehicles
{
class Man;
class CAManBase: Man
{
class HitPoints
{
class HitHead;
class HitBody;
class HitHands;
class HitLegs;
};
};
class TM4_CAManBase: CAManBase
{
class HitPoints: HitPoints
{
class HitFace: HitHead
{
armor = 1; // Keep constant so that the hit point armor remains on the same scale
material = -1;
name = "face_hub"; // Selection name
passThrough = 0.1; // Damage resistance
radius = 0.08;
explosionShielding = 0.1; // Protection against explosive damage
minimalHit = 0.01; // Minimal damage value that can be applied
}
class HitNeck: HitFace
{
armor = 1;
material = -1;
name = "neck";
passThrough = 0.1;
radius = 0.1;
explosionShielding = 0.5;
minimalHit = 0.01;
}
class HitHead: HitNeck
{
armor = 1;
material = -1;
name = "head";
passThrough = 0.1;
radius = 0.2;
explosionShielding = 0.5;
minimalHit = 0.01;
depends = "HitFace max HitNeck"; // Returns the greater of HitFace and HitNeck.
};
class HitPelvis: HitBody
{
armor = 1;
material = -1;
name = "pelvis";
passThrough = 0.1;
radius = 0.2;
explosionShielding = 1;
visual = "injury_body";
minimalHit = 0.01;
};
class HitAbdomen: HitPelvis
{
armor = 1;
material = -1;
name = "spine1";
passThrough = 0.1;
radius = 0.15;
explosionShielding = 1;
visual = "injury_body";
minimalHit = 0.01;
};
class HitDiaphragm: HitAbdomen
{
armor = 1;
material = -1;
name = "spine2";
passThrough = 0.1;
radius = 0.15;
explosionShielding = 6;
visual = "injury_body";
minimalHit = 0.01;
}
class HitChest: HitDiaphragm
{
armor = 1;
material = -1;
name = "spine3";
passThrough = 0.1;
radius = 0.15;
explosionShielding = 6;
visual = "injury_body";
minimalHit = 0.01;
};
class HitBody: HitChest
{
armor = 1000; //not supposed to take damage directly
material = -1;
name = "body";
passThrough = 0.1;
radius = 0.16;
explosionShielding = 6;
visual = "injury_body";
minimalHit = 0.01;
depends = "HitPelvis max HitAbdomen max HitDiaphragm max HitChest";
};
class HitArms: HitHands
{
armor = 1;
material = -1;
name = "arms";
passThrough = 1;
radius = 0.1;
explosionShielding = 1;
visual = "injury_hands";
minimalHit = 0.01;
};
class HitHands: HitArms
{
armor = 1;
material = -1;
name = "hands";
passThrough = 1;
radius = 0.1;
explosionShielding = 1;
visual = "injury_hands";
minimalHit = 0.01;
depends = "HitArms";
};
class HitLegs: HitLegs
{
armor = 1;
material = -1;
name = "legs";
passThrough = 1;
radius = 0.12;
explosionShielding = 1;
visual = "injury_legs";
minimalHit = 0.01;
};
};
armor= 2;//keep constant so that the hit point armor remains on the same scale
armorStructural= 0.4;// [*] must be adjusted for each model to achieve consistent total damage results
explosionShielding = 0.04;// [*] for consistent explosive damage after adjusting = ( armorStructural / 10 )
minTotalDamageThreshold = 0.001;//minimalHit for total damage
impactDamageMultiplier= 0.5;//multiplier for falling damage
// * adjusted for each model
};
};
Armored vest
The following vest config will provide protection for the neck, arms, chest, diaphragm abdomen and body.
// Carrier Special Rig (Green)
class V_PlateCarrierSpec_rgr: Vest_NoCamo_Base
{
/* other properties */
class ItemInfo: ItemInfo
{
/* other properties */
class HitpointsProtectionInfo
{
class Neck
{
hitpointName = "HitNeck"; // Defined in the man base class
armor = 8; // Armor value of this hitpoint
passThrough = 0.5; // Penetration resistance of the hitpoint
};
class Arms
{
hitpointName = "HitArms";
armor = 8;
passThrough = 0.5;
};
class Chest
{
hitpointName = "HitChest";
armor = 24;
passThrough = 0.1;
};
class Diaphragm
{
hitpointName = "HitDiaphragm";
armor = 24;
passThrough = 0.1;
};
class Abdomen
{
hitpointName = "HitAbdomen";
armor = 24;
passThrough = 0.1;
};
class Body
{
hitpointName = "HitBody";
passThrough = 0.1;
};
};
};
};
Headgear
This headgear increases the protection of the Head only, for example it doesn't provide additional protection for the face, so the value from the base class (above) will be used as they are defined.
class H_HelmetB: ItemCore
{
/* other properties */
class ItemInfo : HeadgearItem
{
/* other properties */
class HitpointsProtectionInfo
{
class Head
{
hitpointName = "HitHead"; // Defined in the man base class
armor = 6; //
passThrough = 0.5; //
};
};
};
};