PreProcessor Commands

From Bohemia Interactive Community
Revision as of 02:09, 7 February 2021 by Lou Montana (talk | contribs) (Text replacement - "\{\{( *)Important( *)\|" to "{{$1Feature$2|$2important$2|")
Jump to navigation Jump to search

The parser allows you to use macros in configs. The purpose of macros is to re-use the same definition in scripts and configs multiple times. It also gives you a centralized place to correct errors in this definition. If you really want to dig into the depths of the preprocessor you'll need to confront it with a bunch of edge cases and see how it behaves. If you are interested in this kind of thing, you might want to have a look at the collection of test-cases linked at the end of this page.

Arma 3
In Arma 3, preprocessor commands are case-sensitive!




A comment is a line within code that is not actually processed by the game engine. They are used to make code more readable or to add notes for future reference. The preprocessor removes all comments from the file before it is processed. Therefore, comments are never actually "seen" by the game engine.

// this is a single-line comment

/* this is a
comment */

mycode = something; // only this part of the line is commented out

myArray = ["apple"/*,"banana*/,"pear"]; // // a portion in the middle of this line is commented out


Using the #define instruction, you can define a keyword and assign a definition to it. The keyword may contain any letter, digit or underscore in arbitrary order, as long as it doesn't start with a digit (RegEx: [a-zA-Z_][0-9a-zA-Z_]*). As an example:

#define true 1

The above means that whenever true is used in a config, the parser will replace this with the value 1.

The define-statement does swallow all spaces in between the macro-keyword and any non-space-character in the body (Note that tabs are not spaces! They don't get removed)

#define MACRO                     test
MACRO // preprocesses to test (without any spaces)

#define MACRO	test // There's a tab between MACRO and test
MACRO // preprocesses to "	test" (without quotes - they are only used to show that the tab character didn't get removed)

The space between the macro-keyword and the body is also fully optional (though very useful to tell the preprocessor where the macro name ends and where the body begins):

#define MACRO#test
MACRO // preprocesses to "test"


You can add arguments to more complex macros, by including them between brackets after the keyword. For the name of the arguments the same rule as for the macro-keyword (see above) apply.

#define CAR(NAME) displayName = NAME;

If you now use CAR("Mini"), this will be replaced with displayName = "Mini";. Multiple arguments can also be used:

#define BLASTOFF(UNIT,RATE) UNIT setVelocity [0,0,RATE];

Macro arguments may be composed of any characters, as long as they do not contain a comma (because commas are used as argument-delimiters). If quotes are being used, they have to be balanced. The same applies to single-quotes This is because String detection is working in macro arguments - Therefore you can even pass in commas as a macro argument as long as they are part of a String (This only works with Strings wrapped in double-quotes though). Note however that although the macro gets resolved properly, the comma gets removed from the String (probably a bug).

#define MACRO(arg) arg
MACRO("Some, content") // preprocesses to "Some content" (note the missing comma)

Quote escaping is also not supported in this context (neither with double- nor with single-quotes)

#define MACRO(arg) arg
MACRO("Some ""content""") // preprocesses to "Some ""content"""

Passing arrays with more than one element [el1,el2,...] as arguments into macros as well as any argument containing comas "some, sentence", will need a small workaround:

#define HINTARG(ARG) hint ("Passed argument: " + str ARG)

Incorrect usage:

HINTARG([1,2,3,4,5,6,7,8,9,0]); // ERROR, won't even compile

Correct usage:

#define array1 [1,2,3,4,5,6,7,8,9,0] 

The argument replacement is performed before the expansion of the macro body. That means one doesn't have to worry about name-conflicts between argument-names of the current macro and already defined macros:

#define ONE foo
#define TWO(ONE) ONE
TWO(bar) // will preprocess to bar

Replacing parts of words

By default, you can only replace whole words by arguments. If you need to replace only part of a word, you can use the ## instruction. This is necessary when either the start or the end of the argument connects to another character that is not a ; (semi-colon) or   (space).

class NAME##_Button_Slider: RscText \
{ \
	model = \OFP2\Structures\Various\##FOLDER##\##FOLDER; \

You can also use the single # to convert an argument to a string.

statement = (this animate [#SEL, 0]); \


For longer definitions, you can stretch the macro across multiple lines. To create a multi-line definition, each line except the last one should end with a \ character:

	__EXEC(idcNav = idcNav + 4) \
The backslash must be the last character in a line when defining a multi-line macro. Any character (including spaces) after the backslash will cause issues.


Undefine (delete) a macro previously set by the use of #define.

#undef NAME


You can use a simple if-then construction to check whether a certain set of definitions has already been made:

#ifdef NAME
	...text that will be used if NAME is defined...

IFDEFs cannot be nested. The preprocessor will generate errors for all inner definitions if the outer definition doesn't exist.


Same as #ifdef, but checks for absence of definition instead.

#ifndef NAME
	...text that will be used if NAME ''isn't'' defined...


#ifndef NAME
	...text that will be used if NAME is -not- defined...
	...text that will be used if NAME -is- defined...


This ends a conditional block as shown in the descriptions of #ifdef and #ifndef above.


Copies the code from a target file and pastes it where #include directive is.

#include "file.hpp"
#include <file.txt> // Brackets are equivalent to quotation marks and may be used in their place.

Source directory is:

  • For any file without starting the include path with \ - the file's current directory
  • When starting with \ - the internal filesystem root (see Addon Development) or the Game's working directory (only with -filePatching enabled)

You can define a path beginning with:

  • drive (only with -filePatching enabled):
    #include "D:\file.txt"
     #include "\myMod\myAddon\file.txt"
  • PBO (keep in mind that in this case, if the PBO's file name will be changed, all '#include' referencing it will need to be updated):
    #include"\myMod\myAddon\file.txt" // Arma 3\@myMod\addons\myAddon.pbo\file.txt;

To move to parent directory use '..' (two dots) (Supported in Arma 3 since v1.49.131707):

#include "..\file.sqf"

Preprocessor does not support the use of macros for pre-defined file names.

#define path "codestrip.txt"
#include path // this will cause an error


'#' (single hash) operator wraps the text with quotation marks.

#define STRINGIFY(s) #s;
#define FOO 123
test1 = STRINGIFY(123); //test1 = "123";
test2 = STRINGIFY(FOO); //test2 = "123";

This operator does only work on keywords following the rules for macro-names (see #define-section). If one wants to stringify anything else (like e.g. a number), one has to use a stringify-macro that takes an argument and stringifies that (as in the example above).

#define MACRO Test #123
MACRO // preprocesses to Test 123 - note that there are not any quotes inserted


'##' (double hash) operator concatenates what's before the ## with what's after it.

#define GLUE(g1,g2) g1##g2
#define FOO 123
#define BAR 456
test1 = GLUE(123,456); //test1 = 123456;
test2 = GLUE(FOO,BAR); //test2 = 123456;


This config parser macro allows you to assign values to internal variables or just execute arbitrary code. The code inside __EXEC macros runs in parsingNamespace and variables defined in it will also be created in parsingNamespace. The variables can then be used to create more complex macros:

__EXEC(cat = 5 + 1;)
__EXEC(lev = cat - 2;)
_cat = parsingNamespace getVariable "cat"; // 6
_lev = parsingNamespace getVariable "lev"; // 4
__EXEC doesn't like round brackets () inside expressions. If you need to have grouping, perhaps you could calculate values inside the brackets separately and assign to local variables:

__EXEC(a = (1+2);) // ERROR

__EXEC(_expr = 1+2;) __EXEC(a = _expr;) // OK


With this config parser macro you can evaluate expressions, including previously assigned internal variables. Unlike with __EXEC, __EVAL supports multiple parentheses

w = __EVAL(safeZoneW - (5 * ((1 / (getResolution select 2)) * 1.25 * 4)));

__EVAL macros must be assigned to a config property and the expression must be terminated with ;. __EVAL can only return Number or String: . Any other type is represented as String, even Boolean type, which will result in either "true" or "false".

__EVAL doesn't like curly brackets {}, if you need to have code in your expression use compile String instead:

result = __EVAL(call {123}); // ERROR

result = __EVAL(call compile "123"); // OK
__EXEC and __EVAL macros are not suitable for SQF/SQS scripts but can be used in configs, including description.ext.
Both global and local variables set in __EXEC are available in __EVAL


This keyword gets replaced with the line number in the file where it is found. For example, if __LINE__ is found on the 10th line of a file, the word __LINE__ will be replaced with the number 10.


This keyword gets replaced with the CURRENT file being processed.

Arma 3
The following macros are available since Arma 3 2.01.


Description: Checks if given file exists.

#if __has_include("\z\ace\addons\main\script_component.hpp")
// File exists! Do something with it
// File does not exist


Description: Is replaced for current date in format array.

__DATE_ARR__ // 2020,10,28,15,17,42


Description: Is replaced for current date in format string.

__DATE_STR__  // "2020/10/28, 15:17:42"


Description: Is replaced for current date in format string.

__DATE_STR__ // "2020/10/28, 15:17:42"


Description: Is replaced for current date in format string. The date is presented in ISO8601 standard.

__DATE_STR_ISO8601__ // "2020-10-28T14:17:42Z"


Description: Is replaced for current time.

__TIME__ // 15:17:42


Description: Is replaced for UTC time.

__TIME_UTC__ // 14:17:42


Description: Counts 1 up everytime it is defined.

__COUNTER__ // 0
__COUNTER__ // 2
__COUNTER__ // 3
__COUNTER__ // 0
__COUNTER__ // 1
__COUNTER__ // 2


Description: Resets counter. See example above.


Description: Gets replaced by a random N bit integer. N can be replaced by 8, 16, 32 and 64

__RAND_INT8__ // 102


Description: Gets replaced by a random unsigned N bit integer. N can be replaced by 8, 16, 32 and 64

__RAND_UINT8__ // 108


Description: Gets replaced by the game version.

__GAME_VER__ // 02.00.146790


Description: Gets replaced by the major game version.

__GAME_VER_MAJ__ // 02


Description: Gets replaced by the minor game version.

__GAME_VER_MIN__ // 00


Description: Gets replaced by the build number.

__GAME_BUILD__ // 146790



__ARMA__ // 1



__ARMA3__ // 1


Description: This macro is only set when the -debug parameter was provided. It can be used to switch your mods or scripts to debug mode dynamically.

__A3_DEBUG__ // 1 (If -debug was enabled)


Description: Gets replaced by the build number. 146790

__GAME_BUILD__ // 146790


Error 2

Preprocessor failed error 2.
How to fix
Add quotation marks in the title, or the file path. (e.g. #include "soGood.sqf").

Error 6

Preprocessor failed on file X - error 6.
Known reasons
"The problem is using #ifdef #ifdef #endif #endif, a.k.a nested #ifdef. This doesn't work in Arma. It's only possible to use #ifdef and #endif once and not nested."
#endif without preceding #ifdef or #ifndef

Error 7

Preprocessor failed on file X - error 7.
Known reasons
The preprocessor encountered an unknown directive. Read, you have probably a typo in the file (something like #inlcude or #defien). Double-check all preprocessor directives in that file.

External links