arma2.cfg: Difference between revisions

From Bohemia Interactive Community
Jump to navigation Jump to search
m (→‎Generic config: maxPacketSize is 1400 bytes since 1.60.87451)
(39 intermediate revisions by 4 users not shown)
Line 1: Line 1:
== Introduction ==
== Introduction ==


The '''arma2.cfg''' or '''arma2oa.cfg''' or '''takeonh.cfg''' file are a configuration files containing detailed information about YOUR game setup. <br>
The '''arma.cfg''' or '''arma2.cfg''' or '''arma2oa.cfg''' or '''takeonh.cfg''' are configuration files containing detailed information about YOUR game setup. <br>
Information such as language, LOD detail, resolution are stored in these files.  <br>
Information such as language, LOD detail, resolution are stored in these files.  <br>
The config files are written after the ARMA 2 was run for first time and the system settings are detected.  <br>
The config files are written after the game was run for first time and the system settings are detected.  <br>
The files itself are just as editable in a text file. The content format is  
The files itself are just as editable in a text file. The content format is  


  variable = value;
  variable = value;


Warning : ''Use '''in-game UI options''' to configure game instead editing this file, unless You know what You doing.''
Warning : ''Unless you know what you're doing, use the '''in-game UI options''' to configure the game instead of editing this file.''


Note: ''All changes via '''in-game UI options''' are saved into arma2.cfg on successful game exit.
Note: ''All changes made via the '''in-game UI options''' are saved to the .cfg file on a successful game exit.


== Location ==
== Location ==


* Armed Assault: The arma.cfg file is located in %userprofile%\Documents\ARMA\arma.cfg.
* Armed Assault: The arma.cfg file is located in %userprofile%\Documents\ARMA\arma.cfg
* Armed Assault 2: The arma2.cfg file is located in %userprofile%\Documents\ARMA 2\arma2.cfg.
* Armed Assault 2: The arma2.cfg file is located in %userprofile%\Documents\ARMA 2\arma2.cfg
* Operation Arrowhead: The arma2oa.cfg file is located in %userprofile%\Documents\ArmA 2 Expansion\arma2oa.cfg.
* Operation Arrowhead: The arma2oa.cfg file is located in %userprofile%\Documents\ArmA 2 Expansion\arma2oa.cfg
* Take On Helicopters: The takeonh.cfg file is located in %userprofile%\Documents\Take On Helicopters\takeonh.cfg.
* Take On Helicopters: The takeonh.cfg file is located in %userprofile%\Documents\Take On Helicopters\takeonh.cfg


=== Custom Name and Location ===
=== Custom Name and Location ===
Line 36: Line 36:
| language="English"; || language selector
| language="English"; || language selector
|-
|-
| adapter=-1; || written by engine each start, changing it manually has no effect!
| adapter=-1; || determines the video adapter (and display connected to it) to use. Useful for systems with multiple displays. -1 is default adapter, 0 is first, 1 is 2nd etc.
|-
|-
| 3D_Performance=93750; || written by engine each start, changing it manually has no effect!
| 3D_Performance=93750; || written by engine each start, changing it manually has no effect!
Line 94: Line 94:
  6 - AToC on A2 + OA trees
  6 - AToC on A2 + OA trees
  7 - AToC enabled on grass, A2 & OA trees (default)
  7 - AToC enabled on grass, A2 & OA trees (default)
''More http://forums.bistudio.com/showpost.php?p=1998153&postcount=42 detailed description] by a community member.''
''More [http://forums.bistudio.com/showpost.php?p=1998153&postcount=42 detailed description] by a community member.''<br>
''NOTE: '''AToC is inactive if Anti-Aliasing is disabled in advanced video options!'''
|-
|  class sockets{maxPacketSize = 1400;}; || setting not available in UI Changing this value changes size of packet from default 1400 bytes to value chosen. <br>
This '''can be set for both''' client-to-server AND server-to-client(s) independently''!  ''see server([[basic.cfg#Networking_Tuning_Options]])'' <br>
{{Background color|orange|Use please only in case Your router or ISP enforce lower packet size and You have connectivity issues with game}}
|}
|}


Line 100: Line 105:


{| border="1" cellspacing="0"
{| border="1" cellspacing="0"
| FXAA=0 || Setting to enable/disable Anti-Aliasing technique via post processing <ref name="FXAA" />
| PPAA=0; || setting not (yet) available in UI. Default is Disabled. Enables Anti-Aliasing technique via post processing: <ref name="PPAA" />
0 - Disabled
1 - FXAA <ref name="FXAA" />
2 - FXAA + sharp filter <ref name="FXAAsharp" /> (hard-coded strength of sharpen is now 0.15)
3 - SMAA <ref name="SMAA" />
''NOTE: '''PPAA can be enabled even if Post-Processing was disabled in advanced video options!'''<br>
'''WARNING this setting was introduced in 1.61 beta 89223'''
|-
| PPAA_Level=0; || setting not (yet) available in UI. Default is Disabled. Values determine for each respective PPAA type used:
0 - SMAA_PRESET_LOW or FXAA_QUALITY_PRESET_12
1 - SMAA_PRESET_MEDIUM or FXAA_QUALITY_PRESET_22
2 - SMAA_PRESET_HIGH or  FXAA_QUALITY_PRESET_26
3 - SMAA_PRESET_ULTRA or FXAA_QUALITY_PRESET_39
'''WARNING this setting was introduced in 1.61 beta 89223'''
|-
| FXAA=0; || setting not (yet) available in UI. Default is Disabled. enables Anti-Aliasing technique via post processing
  0 - Disabled
  0 - Disabled
  1 - FXAA_QUALITY_PRESET_10
  1 - FXAA_QUALITY_PRESET_10
Line 119: Line 139:
  16 - FXAA_QUALITY_PRESET_29
  16 - FXAA_QUALITY_PRESET_29
  17 - FXAA_QUALITY_PRESET_39
  17 - FXAA_QUALITY_PRESET_39
''Complexity of quality settings are based on default FXAA 3.11 settings''
''Complexity of quality settings are based on default FXAA settings (revision 3.11)''<br>
''10 to 15 - default medium dither (10=fastest, 15=highest quality)''<br>
''20 to 29 - less dither, more expensive (20=fastest, 29=highest quality)''<br>
''39 - no dither, very expensive''<br>
''NOTE: '''FXAA can be enabled even if Post-Processing was disabled in advanced video options!'''<br>
{{Background color|orange|'''WARNING this setting was removed in 1.61 beta as deprecated'''}}
|-
| FXAASharp=0; || Default is disabled (0), quality levels range from 1 to 6, where 6 is the sharpest filter
''NOTE: '''FXAAsharpen is inactive while NightVision and Thermal Imaging are used.'''<br>
{{Background color|orange|'''WARNING this setting was removed in 1.61 beta as deprecated'''}}
|}
|}


Line 128: Line 157:
|-
|-
| PiPEnabled=0; || Setting to enable/disable Picture in Picture
| PiPEnabled=0; || Setting to enable/disable Picture in Picture
|-
|}
|}


Line 146: Line 174:
<references>
<references>
<ref name="AToC">Read [http://en.wikipedia.org/wiki/Alpha_to_coverage Wikipedia article] and [http://aras-p.info/texts/D3D9GPUHacks.html#ref1 GPU features list] for more details</ref>
<ref name="AToC">Read [http://en.wikipedia.org/wiki/Alpha_to_coverage Wikipedia article] and [http://aras-p.info/texts/D3D9GPUHacks.html#ref1 GPU features list] for more details</ref>
<ref name="FXAA">Read [[http://timothylottes.blogspot.com/2011/03/nvidia-fxaa.html]]</ref>
<ref name="FXAA">Read [http://timothylottes.blogspot.com/2011/03/nvidia-fxaa.html Author's blog about FXAA], Complexity of quality settings are based on default FXAA settings (revision 3.11)</ref>
<ref name="SMAA">Read [http://www.iryoku.com/smaa/ Author's website about SMAA], Complexity of quality settings are based on default SMAA settings (revision 2.7)</ref>
<ref name="FXAAsharp">Sharpen Filter for FXAA mode of PPAA was hard-coded with intensity of 0.15 when enabled</ref>
<ref name="PPAA">Post-Process Anti-Aliasing is new method of full-screen AA pass</ref>
 
<references />
<references />


[[Category:Armed Assault|arma.cfg]]
[[Category:ArmA_2|arma2.cfg]]
[[Category:ArmA_2|arma2.cfg]]
[[Category:ArmA 2: Operation Arrowhead|arma2oa.cfg]]
[[Category:Take On Helicopters|takeonh.cfg]]
[[Category:_Startup_Parameters]]
[[Category:_Startup_Parameters]]

Revision as of 00:04, 13 June 2013

Introduction

The arma.cfg or arma2.cfg or arma2oa.cfg or takeonh.cfg are configuration files containing detailed information about YOUR game setup.
Information such as language, LOD detail, resolution are stored in these files.
The config files are written after the game was run for first time and the system settings are detected.
The files itself are just as editable in a text file. The content format is 

variable = value;

Warning : Unless you know what you're doing, use the in-game UI options to configure the game instead of editing this file.

Note: All changes made via the in-game UI options are saved to the .cfg file on a successful game exit.

Location

  • Armed Assault: The arma.cfg file is located in %userprofile%\Documents\ARMA\arma.cfg
  • Armed Assault 2: The arma2.cfg file is located in %userprofile%\Documents\ARMA 2\arma2.cfg
  • Operation Arrowhead: The arma2oa.cfg file is located in %userprofile%\Documents\ArmA 2 Expansion\arma2oa.cfg
  • Take On Helicopters: The takeonh.cfg file is located in %userprofile%\Documents\Take On Helicopters\takeonh.cfg

Custom Name and Location

You can change the naming with the startup parameter -cfg=<string>. 

-cfg=myGameSettings.cfg

The file will be then located in your game directory instead. 

 c:\arma2\myGameSettings.cfg

Example

Generic config

language="English"; language selector
adapter=-1; determines the video adapter (and display connected to it) to use. Useful for systems with multiple displays. -1 is default adapter, 0 is first, 1 is 2nd etc.
3D_Performance=93750; written by engine each start, changing it manually has no effect!
Resolution_Bpp=32; bit per pixel depth of output
Resolution_W=1920; interface resolution width in fullscreen
Resolution_H=1200; interface resolution height in fullscreen
refresh=60; monitor refresh rate in fullscreen
Render_W=2400; 3D rendered resolution width in fullscreen
Render_H=1500; 3D rendered resolution width in fullscreen
FSAA=0; full screen antialiasing level
postFX=0; post processing level
GPU_MaxFramesAhead=1000; setting not available in UI, supported values 1 to 1000 (0==driver), May lower 'Mouse lag' by GPU render-ahead buffer
GPU_DetectedFramesAhead=3; written by engine each start, changing it manually has no effect!
HDRPrecision=8; setting not available in UI (ARMA2, OA has it since 1.57), supported values are 8(default), 16 and 32. Defines bit depth precision for HDR.
lastDeviceId=""; written by engine each start, changing it manually has no effect!, might be blank
localVRAM=1063723008; written by engine each start, changing it manually has no effect!
nonlocalVRAM=1878616064; written by engine each start, changing it manually has no effect!
winX=470; position of window in X axis
winY=64; position of window in Y axis
winW=1440; interface resolution width in window
winH=900; interface resolution height in window
winDefW=1440; 3D rendered resolution width in window
winDefH=900; 3D rendered resolution height in window
Windowed=0; written by engine each exit, depend on state in last run (1=windowed or 0=fullscreen)
Vsync=1; Option to disable V-sync(Vertical synchronization, 1=enabled(default) or 0=disabled)
AToC=7; setting not available in UI, Level of Alpha To Coverage Anti-Aliasing[1] (7=all enabled(default) or 0=disabled (normal AA prior AToC)) 
0 - disabled
1 - AToC on grass
2 - AToC on new OA trees (takistan, zargabad, proving ground, shapur)
4 - AToC on old A2 trees (utes, chernarus)
// combined 
3 - AToC on grass & OA trees 
5 - AToC on A2 trees + grass
6 - AToC on A2 + OA trees
7 - AToC enabled on grass, A2 & OA trees (default)

More detailed description by a community member.
NOTE: AToC is inactive if Anti-Aliasing is disabled in advanced video options!

class sockets{maxPacketSize = 1400;}; setting not available in UI Changing this value changes size of packet from default 1400 bytes to value chosen.

This can be set for both client-to-server AND server-to-client(s) independently! see server(basic.cfg#Networking_Tuning_Options)
Template:Background color

ARMA 2: Operation Arrowhead

PPAA=0; setting not (yet) available in UI. Default is Disabled. Enables Anti-Aliasing technique via post processing: [2] 
0 - Disabled
1 - FXAA [3]
2 - FXAA + sharp filter [4] (hard-coded strength of sharpen is now 0.15)
3 - SMAA [5]

NOTE: PPAA can be enabled even if Post-Processing was disabled in advanced video options!
 WARNING this setting was introduced in 1.61 beta 89223

PPAA_Level=0; setting not (yet) available in UI. Default is Disabled. Values determine for each respective PPAA type used: 
0 - SMAA_PRESET_LOW or FXAA_QUALITY_PRESET_12 
1 - SMAA_PRESET_MEDIUM or FXAA_QUALITY_PRESET_22
2 - SMAA_PRESET_HIGH or  FXAA_QUALITY_PRESET_26
3 - SMAA_PRESET_ULTRA or FXAA_QUALITY_PRESET_39

WARNING this setting was introduced in 1.61 beta 89223

FXAA=0; setting not (yet) available in UI. Default is Disabled. enables Anti-Aliasing technique via post processing 
0 - Disabled
1 - FXAA_QUALITY_PRESET_10
2 - FXAA_QUALITY_PRESET_11
3 - FXAA_QUALITY_PRESET_12 
4 - FXAA_QUALITY_PRESET_13
5 - FXAA_QUALITY_PRESET_14 
6 - FXAA_QUALITY_PRESET_15
7 - FXAA_QUALITY_PRESET_20 
8 - FXAA_QUALITY_PRESET_21
9 - FXAA_QUALITY_PRESET_22 
10 - FXAA_QUALITY_PRESET_23
11 - FXAA_QUALITY_PRESET_24
12 - FXAA_QUALITY_PRESET_25
13 - FXAA_QUALITY_PRESET_26
14 - FXAA_QUALITY_PRESET_27
15 - FXAA_QUALITY_PRESET_28
16 - FXAA_QUALITY_PRESET_29
17 - FXAA_QUALITY_PRESET_39

Complexity of quality settings are based on default FXAA settings (revision 3.11)
10 to 15 - default medium dither (10=fastest, 15=highest quality)
20 to 29 - less dither, more expensive (20=fastest, 29=highest quality)
39 - no dither, very expensive
NOTE: FXAA can be enabled even if Post-Processing was disabled in advanced video options!
 Template:Background color

FXAASharp=0; Default is disabled (0), quality levels range from 1 to 6, where 6 is the sharpest filter

NOTE: FXAAsharpen is inactive while NightVision and Thermal Imaging are used.
 Template:Background color

Take On Helicopters

SWLayersCount=64;
PiPEnabled=0; Setting to enable/disable Picture in Picture

Languages

Simply alter 

Language="English";

to whatever language you may wish to have.

See Also

See username.arma2profile for information about personalized user settings.

Notes

<references> [1] [3] [5] [4] [2]

  1. ↑ 1.0 1.1 Read Wikipedia article and GPU features list for more details
  2. ↑ 2.0 2.1 Post-Process Anti-Aliasing is new method of full-screen AA pass
  3. ↑ 3.0 3.1 Read Author's blog about FXAA, Complexity of quality settings are based on default FXAA settings (revision 3.11)
  4. ↑ 4.0 4.1 Sharpen Filter for FXAA mode of PPAA was hard-coded with intensity of 0.15 when enabled
  5. ↑ 5.0 5.1 Read Author's website about SMAA, Complexity of quality settings are based on default SMAA settings (revision 2.7)
Retrieved from "https://community.bistudio.com/wiki?title=arma2.cfg&oldid=71922"