Jump to navigation Jump to search
Revision as of 01:01, 17 February 2021 by Lou Montana (Text replacement - "\| *((\[\[[a-zA-Z0-9_ |()]+\]\],? ?)+) * \}\}" to "|seealso= $1 }}")
- Sets custom camera aperture when HDR is enabled ([-1] to do it automatically). `minimum` should be <= `standard` and <= `maximum`.
- setApertureNew [minimum, standard, maximum, luminance]
- [minimum, standard, maximum, luminance]: Array
- minimum: Number - minimum aperture
- standard: Number - standard aperture
- maximum: Number - maximum aperture
- luminance: Number - standard luminance
- Return Value:
- Example 1:
setApertureNew [0.3, 0.2, 0.1, 1];
- Example 2:
- Simulate eye adjustment at night:
setDate [2016, 8, 10, 4, 0]; setApertureNew [2, 8, 14, .9];
- Example 3:
- Narrower range for a subtler effect:
setDate [2016, 8, 10, 4, 0]; setApertureNew [2, 5, 9, .8];
- Posted on October 30, 2016 - 04:54 (UTC)
Some notes on example 2 - try it outdoors on a piece of ground with high contrasting areas. I suggest the end of a runway, standing among the white painted triangles.
Look up about 60 degrees above the horizon and toggle between setApertureNew [2, 8, 14, .9]; and the default setting of setAperture -1;. There should be little change -- at least on the date in the example.
Reset again to setApertureNew [2, 8, 14, .9]; and then pan slowly down until you're basically looking at your feet. The less sky (the main outdoor light source) you see, the 'wider' (toward the 'min' number) the aperture will become. Looking at the ground on a runway, for example, you should be able to easily distinguish the painted white triangles from the unpainted pavement. Again, toggle back to the default aperture. The view should get much darker.
This setting allows for some natural adjustment based on the amount of visible light in the scene, and is highly encouraged over the default fixed aperature for night missions. When you're standing in the beam of a lighthouse, for example (try near the 'Spartan' on Stratis), you will be basically unable to see anything not illuminated by the beam. Once the beam passes and your vision returns to normal, your immediate surroundings will be dimmer, of course, but you'll be able to see further out.