setOvercast

1.00

LELocal

Hover & click on the images for description

Description

Description:

Set overcast to given value smoothly during given time (in seconds). Zero time means immediate change. An overcast setting of zero means clear (sunny) weather, and one means storms and rain are very likely. Higher overcast values also result in higher wind speeds.

Multiplayer:

Each client and the server can have differing overcast values.

Groups:

Environment

Syntax

Syntax:

time setOvercast overcast

Parameters:

time: Number - In seconds

overcast: Number - Range 0 to 1

Return Value:

Nothing

Examples

Example 1:

50 setOvercast 0.5

Additional Information

See also:

overcastnextWeatherChangesimulSetHumidity

Notes

Report bugs on the Feedback Tracker and/or discuss them on the Arma Discord or on the Forums.
Only post proven facts here! Add Note

Notes

Posted on August 4, 2006 - 12:00

hardrock

Notes from before the conversion: Use setRain if you want to make sure it rains.

Ceeeb

Only one script command induced weather change (either setOvercast or setFog) can be happening at a time. Starting a new weather change will immediately halt the current weather change. SetRain changes are independent and can occur simultaneously to a weather change.

Joris

Arma 3's volumetric clouds cannot be instantly changed (it would take up to a few seconds to do a full recompute). Therefore, 0 setOvercast 0 will not have the desired effect. You can use skipTime to get to the desired cloud coverage. NOTE: To get instant, seamless overcast change to overcast 1 advance the time 24 hours with skipTime while setting overcast transition time to 86400 seconds (24 hours) -- Killzone_Kid 86400 setOvercast 1; skipTime 24; //to remain on the same date: skipTime -24; 86400 setOvercast 1; skipTime 24;

Killzone_Kid

With removal of simulSetHumidity‎, in order to add instant cloud cover, execute simulWeatherSync with delay (for now): skipTime -24; 86400 setOvercast 1; skipTime 24; 0 = [] spawn { sleep 0.1; simulWeatherSync; }; There is slight freeze with simul command.

Adanteh

Delay in Arma 3 doesn't work for quick changes. Using 120 setOvercast 1 only reaches full overcast after about 50 minutes. Using setTimeMultiplier does speed up the overcast, but it doesn't render any clouds. You will need to skipTime or forceWeatherChange to render clouds if you want it to happen within the hour.

Bottom Section

Posted on May 4, 2016 - 22:41 (UTC)

AgentRev

Actual transition time is inversely proportional to the timeMultiplier. For example, a time of 7200 (2 hours) and a timeMultiplier of 2 will result in a real-life transition time of 7200 / 2 = 3600 (1 hour).
In case of overcast, a timeMultiplier > 1 will cause gradual desyncing of the cloud cover with the overcast value, so it is advised that you multiply the transition time by the multiplier, i.e. : (7200 * timeMultiplier) setOvercast 1