|
|
| (4 intermediate revisions by one other user not shown) |
| Line 1: |
Line 1: |
| {{TOC|side}}
| | [[Category:Sandbox]] |
| = Mesh Preparation =
| | Moved to [[Arma Reforger:Character Gear Creation/Headgear/Asset Preparation]] |
| | |
| == General ==
| |
| When it comes to character gear, you might notice that default rotation of character is different compared to other assets. This is caused by the fact, that in game animations are created using motion capture & Motion Builder software, which expects different orientation that the game.{{Feature|important|It is '''no longer necessary to rotate equipment by 180 degrees''' - keep in mind though that Character_Template.FBX & Head_Template.FBX have orientation set in a way, which allows to use this model in creation of animations in Motion Builder or similar software.}}Positioning of helmet without any reference points is quite tricky and that's why it might be handy to load some reference model. To do so, perform following steps:
| |
| | |
| * Import '''HeadSize_Template.fbx''' into scene with your model
| |
| ** This special contains all vanilla heads available molded into one entity - with this you can ensure that there will be no clipping with any of the existing models
| |
| * Adjust position of the helmet and straps so it fit that universal head
| |
| | |
| If everything went fine, you should end up with something like this:
| |
| | |
| [[File:armareforger-new-headgear-head-template.png|493x493px]] | |
| | |
| Once you verified that helmet model doesn't need more adjustments, delete '''HeadSize_Template''' mesh from the scene since it will be no longer necessary.
| |
| | |
| == Rigging ==
| |
| After properly positioning model, it is time for getting skeleton in and then rigging the asset. Sample Helmet is an asset imported from A3, so it already has some skinning on it, which in case of helmets will be fully usable but if you have some fresh asset, you can consider two options, which are described below.
| |
| | |
| In any case, first step on to do list will be importing of skeleton and empty bones from template file.
| |
| | |
| === Importing skeleton ===
| |
| [[File:armareforger-new-headgear-skeleton.png|thumb|'''Armature''' and '''Empty Objects''' necessary for equipment to be animated in game]] | |
| | |
| Importing skeleton into scene where you have your helmet can be done in few simple steps:
| |
| | |
| * Keep your '''Blender''' instance with helmet open
| |
| * Download & then open '''Character_Weights_Template.blend''' file in '''2nd instance of Blender'''
| |
| * Switch to '''Object Mode'''
| |
| * Unhide '''Memory Points''' collection and select '''all empty objects''' over there (there should be six of them in total)
| |
| ** Tip: You can select multiple empty objects Left Shift modifier
| |
| * Copy all those objects with {{Controls|Ctrl|C}} combination
| |
| * Switch over to '''Blender''' instance containing your helmet and paste objects into Blender with {{Controls|Ctrl|V}} shortcut
| |
| | |
| After that, verify that in primary instance of the Blender (the one with helmet model) following things are true:
| |
| * Make sure that you also imported empty objects (from '''Memory Points''' collections)
| |
| * '''Armature object''' is called '''Armature''' - keep it this way!
| |
| * It is important that model contains only '''Armature''' and '''[https://docs.blender.org/manual/en/latest/modeling/empties.html empty objects] from the template'''!
| |
| ** In total, '''163 bones/empty objects''' (''156 bones and 6 dummy objects'') should be present when model is imported into '''Workbench''' - see note in '''Importing model''' section
| |
| [[File:armareforger-new-headgear-skeleton-full.png|954x954px]]
| |
| | |
| === Skinning asset ===
| |
| Once skeleton is present in the scene, it is possible to start process of skinning mesh to the bones. This can be using one of tw
| |
| | |
| ==== Transfer weights ====
| |
| Currently, only [https://enfusionengine.com/api/redirect?to=enfusion://ResourceManager/~ArmaReforger:Assets/Characters/Basebody/Basebody_Male_Head_01.xob Basebody_Male_Head_01.xob] has its face skinned and there are no facial animations yet it in-game, so it's rather tricky to verify if weights are working correctly. In any case, weights transfer is {{Feature|informative|In this article, [[Arma_Reforger:Resource_Manager:_Options#Register_.22enfusion:.2F.2F.22_protocol|'''Enfusion links''']] are used. With those links it is possible to open specific resource just by simply clicking on that link. Enfusion links '''has to be manually activated in Workbench options''' (Workbench -> Options -> Workbench -> Register "enfusion://" protocol) before it can be used]}}In any case, [https://docs.blender.org/manual/en/latest/sculpt_paint/weight_paint/editing.html#transfer-weights weights transfer] can be done in following steps:
| |
| * Copy '''reference mesh''' (f.e. '''Character_Weights_Template.blend''' can be used) to the scene with helmet
| |
| * Select Helmet mesh with {{Controls|LMB}}
| |
| ** You might want to separate chin strap to separate object and keep helmet hard shell assigned to '''Head''' vertex group
| |
| * Select '''reference mesh'''
| |
| * Switch to '''[https://docs.blender.org/manual/en/latest/sculpt_paint/weight_paint/index.html Weight Paint] mode'''
| |
| * From the menu in top left corner, select '''Weights''' -> '''Transfer Weights''' option
| |
| ** In top left corner of the viewport, there should be now '''Transfer Mesh Data''' menu which you can expand
| |
| ** Change '''Source Layers Selection''' to '''By Name'''
| |
| * Click with {{Controls|LMB}} somewhere in the viewport to confirm the transfer
| |
| {{Messagebox|'''Tip''': You can also use '''Sample Helmet''' as source object for weight transfer.|✩|#88cc88}}
| |
| | |
| ==== Manual skinning ====
| |
| [[File:armareforger-new-headgear-vertex-group.png|thumb|474x474px|'''Vertex Groups''' present in '''Object_LOD0''']]
| |
| If you don't want to use transfer weight tool or you quickly want to test if helmet is working in game, then you can skin the helmet manually. To do so, perform following actions:
| |
| * Select helmet model (''in this case Object_LOD0'') and switch to Object Mode
| |
| * Navigate to '''[https://docs.blender.org/manual/en/latest/editors/properties_editor.html#object-data Data]''' tab in '''Properties''' window and locate '''[https://docs.blender.org/manual/en/latest/modeling/meshes/properties/vertex_groups/introduction.html Vertex Group]''' section
| |
| * Add appropriate '''Vertex Groups''' for your helmet via '''+ button (1)'''
| |
| ** Once vertex group is added, you can change its name by double clicking on it with {{Controls|LMB}}
| |
| | |
| Now, depending whether you want to simply assign everything to one bone (for instance when you are doing a hat or you don't want to skin chin strap to chin yet), you can either chose one of the options:
| |
| | |
| ===== Simple skinning =====
| |
| As title suggest, this skinning is very simple - whole mesh will be basically skinned to single bone - '''Head. To do'''
| |
| | |
| * Add just one '''Head''' vertex group via '''+ button (1)''' located at the right side
| |
| | |
| * Switch to '''Edit Mode''' while having Object_LOD0 selected and select all faces with i.e. {{Controls|Ctrl|A}} shortcut
| |
| * Click on Head vertex group and then click on '''Assign''' button
| |
| {{Messagebox|'''Tip''': Alternatively, if you are using model from A3, you can also try to renaming '''Vertex Groups''' so they match '''Arma Reforger''' bones|✩|#88cc88}}
| |
| | |
| ===== Weight Painting =====
| |
| Using weight paint allows you to skin influences between maximum 4 bones. In order to achieve that, perform following actions:
| |
| | |
| * Switch to '''[https://docs.blender.org/manual/en/latest/sculpt_paint/weight_paint/index.html Weight Paint] mode'''
| |
| * Create vertex groups for things you want to skin - in case of helmet with chin strap, '''FacialJaw''' & '''Head''' bone would be sufficient
| |
| * Select one of the vertex groups and starts painting weights with {{Controls|LMB}}
| |
| <gallery mode="nolines" widths="500" heights="300">
| |
| File:armareforger-new-headgear-weight-painting-head.jpg
| |
| File:armareforger-new-headgear-weight-painting-facialJaw.jpg
| |
| File:armareforger-new-headgear-weight-painting-neck.jpg
| |
| </gallery>{{Feature|informative|Vanilla helmets are right now only using one bone - '''Head''' - for whole model (including chin strap) although that might change in the future.}}
| |
| | |
| ==== Armature modifier ====
| |
| Once asset is skinned with one of the above methods, there is one more thing to do in order to link vertex groups with skeleton and thus achieve animated asset:
| |
| * In '''Modifiers''' tab, add new [https://docs.blender.org/manual/en/latest/modeling/modifiers/deform/armature.html '''Armature''' modifier] via '''Add Modifier (1)''' button
| |
| ** In '''Object''' property, select '''Armature''' as object to deform with
| |
| [[File:armareforger-new-headgear-aramture-modifier.png]]
| |
| | |
| After that, you could quickly verify if asset is skinned by selecting '''Armature''' and switching to '''Pose Mode.''' In this mode you can try to move bones and see if mesh is following them.
| |
| | |
| == Colliders ==
| |
| Helmets in '''Arma Reforger''' are using actual colliders for protection of the character so its quite important to set it correctly.
| |
| | |
| === Creating colliders ===
| |
| First step towards creating proper collider will be making of a new object, which should receive one of the [[Arma Reforger:FBX Import#Collider shape|colliders prefixes]] (in this case '''UTM_''' prefix was used). For instance, sometimes it is feasible to create nice collider out of regular mesh by removing all unnecessary elements and then [https://docs.blender.org/manual/en/latest/modeling/modifiers/generate/decimate.html decimating it] below ~150 faces. Other option is to create mesh from scratch which shouldn't be that big task in case of helmet but it might be bit more time consuming so choice is up to creator.
| |
| | |
| [[File:armareforger-new-headgear-helmet-firegeo.gif]]
| |
| | |
| In both cases, here are few things to consider:
| |
| * Shape should fit the helmet
| |
| * Should be fairly simple
| |
| ** It is not recommended to use exact thickness of the helmet - instead it is enough to use material with predefined thickness
| |
| * [[Arma Reforger:FBX Import#Collider shape|UTM (Trimeshes) colliders]] can be used
| |
| Once collider is done, it will be necessary to connect it to one of the existing colliders. Due to nature of colliders, they '''don't support skinning''' and they have to be parented to bone via '''[https://docs.blender.org/manual/en/latest/scene_layout/object/properties/relations.html#relations Relations]'''
| |
| | |
| ==== Setting relations: Using Make Parent ====
| |
| Any object can be quite easily parented via '''[https://docs.blender.org/manual/en/latest/scene_layout/object/editing/parent.html#bone-parent Make Parent]''' action. To do so, perform following steps:
| |
| * Select '''collider object'''
| |
| * Select '''Armature''' as second object with Left {{Controls|LShift|LMB}}combo
| |
| * Switch to '''Pose Mode''' with both objects selected
| |
| * Select '''Head''' bone
| |
| ** Tip: you can turn on bone names for easier navigation!
| |
| * Open [https://docs.blender.org/manual/en/latest/interface/controls/templates/operator_search.html#menu-search Menu Search] ( {{Controls|Tab}} using [https://docs.blender.org/manual/en/latest/interface/keymap/industry_compatible.html#general Industry Compatible Keymap] )
| |
| ** Search for '''Make Parent''' & select it
| |
| ** Select '''Bone''' in '''Set Parent To''' menu
| |
| ** In '''Make Parent''' menu in bottom left corner select '''Keep Transform''' option
| |
| [[File:armareforger-new-headgear-relation-action.gif]]
| |
| | |
| ==== Setting relations: Using Relations tab ====
| |
| | |
| * Create a new object and in '''Relations''' tab set relation to '''Head'''
| |
| ** Reposition collider to correct location
| |
| * If collider is suddenly very small, make sure that scale of the armature is correct
| |
| [[File:armareforger-new-headgear-relation-manual.gif]]
| |
| | |
| === Creating material ===
| |
| | |
| * Perform research - try to find thickness and density of material
| |
| * Create new inherited material - usage of one of the existing materials is recommended
| |
| ** This way, you will inherit for instance correct particle effects, sounds and decals
| |
| ** In vanilla game those visual & sound effects are still being worked on (0.9.9)
| |
| * Fill in those values to that new material and then adjust Kinetic Resistance so it matches desired protection level
| |
| ** You can use following spreadsheet for those calculations
| |
| | |
| === Materials & Layer Preset ===
| |
| | |
| * Collider should '''FireGeo''' [[Arma Reforger:Collision Layer|Layer Preset]]
| |
| * '''UCX''' or simple shapes are recommended
| |
| * Use previously created material or one of the existing gamemats from game, which matches ballistic properties of your helmet
| |
| | |
| == Creating Item variant ==
| |
| | |
| * Make copy of your helmet (FBX/Blend) and open it
| |
| * Remove skeleton and all empty objects
| |
| * Modify model of helmet so it appears like lying on flat surface
| |
| ** For instance, straps can be deformed so they are resting on surface
| |
| * No skeleton needed
| |
| * Collider can be even simpler shape, but it is also possible to reuse previously created one
| |
| ** '''[[Arma Reforger:Collision Layer|Layer Preset]]''' is changed from ''FireGeo'' to '''ItemFireView'''
| |
| | |
| = Importing model =
| |
| | |
| * Make sure that Export skinning option is checked and reimport the model via '''Reimport resource''' button
| |
| * Make sure that you have '''163 bones in total'''
| |
| ** In '''Details''' tab, you can find current amount of bones and dummies in '''Bones''' section. First number represents amount of bones and second, number of dummies. By default, bones which are not affecting any mesh (there is no Vertex Group representing
| |