Basic Server Config File – Arma 2

From Bohemia Interactive Community
Jump to navigation Jump to search

Introduction

This article deals with the basic.cfg, the name means nothing, and can be called anything. The real name is determined by the -cfg command line option when launching the dedicated server.

In this configuration file you should configure your server's connectivity, mainly for performance tuning.

Performance Tuning Options

There are also some parameters that can be used to fine-tune network performance. You can add following entries to arma.cfg (the main Armed Assault configuration file) 

MaxMsgSend=<limit>; 
   Maximum number of messages that can be sent in one simulation cycle.
   Increasing this value can decrease lag on high upload bandwidth servers.
   Default: 128

MaxSizeGuaranteed=<limit>; 
   Maximum size of guaranteed packet in bytes (without headers). Small messages
   are packed to larger frames. Guaranteed messages are used for non-repetitive
   events like shooting.
   Default: 512

MaxSizeNonguaranteed=<limit>; 
   Maximum size of non-guaranteed packet in bytes (without headers).
   Non-guaranteed messages are used  for repetitive updates like soldier or
   vehicle position. Increasing this value may improve bandwidth requirement, 
   but it may increase lag.
   Default: 256

MinBandwidth=<bottom_limit>;
   Bandwidth the server is guaranteed to have (in bps). This value helps server
   to estimate bandwidth available. Increasing it to too optimistic values can
   increase lag and CPU load, as too many messages will be sent but discarded.
   Default: 131072

MaxBandwidth=<top_limit>;
   Bandwidth the server is guaranteed to never have. This value helps the server
   to estimate bandwidth available.

MinErrorToSend=<limit>;
   Minimal error to send updates across network. Using a smaller value can make
   units  observed by binoculars or sniper rifle to move smoother.
   Default: 0.01

MaxCustomFileSize=<size_in_bits>;
   Users with custom face or custom sound larger than this size are kicked when
   trying to connect.

Note
The greatest level of optimization can be achieved by setting the MaxMsgSend
and MinBandwidth parameters. For a server with 1024 kbps we recommend the
following values:
   MaxMsgSend = 256;
   MinBandwidth = 768000;

While connected to the dedicated server, you can use the admin command #monitor to monitor server resource usage. (You have to be logged in as or voted as game admin to do this.) The server never runs at more than 50 fps. When running slower, it always uses all available CPU processing power to maintain the smoothest possible gameplay. When running at less than 15 fps, you can consider the server overloaded – the mission currently played is probably too complex for given server. If you see the server is not using bandwidth that it could use, you can try increasing values MaxMsgSend and MinBandwidth.



Editing server.cfg (section) From Bohemia Interactive Community Jump to: navigation, search Bold textItalic textInternal linkExternal link (remember http:// prefix)Level 2 headlineEmbedded imageMedia file linkMathematical formula (LaTeX)Ignore wiki formattingYour signature with timestampHorizontal line (use sparingly)

==Example Configuration File== 

 // // server.cfg // // comments are written with "//" in front of them. // GLOBAL SETTINGS hostname="[UNA] United Nations Army - Clan Server"; // The name of the server that shall be displayed in the public server list password=""; // Password for joining, eg connecting to the server passwordAdmin="warcry"; // Password to become server admin. When Youre in Arma MP and connected to the server, type '#login xyz' reportingIP="armedass.master.gamespy.com"; // This is the default setting. If you change this, your server might not turn up in the public list. Leave empty for private servers logFile="z_run/server_console.log"; // Tells arma-server where the logfile should go and what it should be called // WELCOME MESSAGE ("message of the day") // It can be several lines, separated by comma // Empty messages "" will not be displayed at all but are only for increasing the interval motd[]={ "", "", "", "Welcome to the United Nations Army server.", "Server Settings: Veteran, Crosshair=off, 3rdPerson=off, MapInfo=off, VoN=off, CustomFiles=200KByte, Voting=33%, PersistentMaps=on", "We are recruiting players - Join us Now !", "http://www.una-clan.org/", "", "We use Mumble VoIP client to communicate when plaing ARMA", "TS2 Server for recruits: gbks.net:8767" }; motdInterval=5; // Time interval (in seconds) between each message // JOINING RULES checkfiles[]={ // Checks if these files are equal to the servers files. If one or more is not, player will be kicked from server "HWTL\dta\data3d.pbo", "dta\data3d.pbo" }; maxPlayers=30; // Maximum amount of players. Civilians and watchers, beholder, bystanders and so on also count as player. maxCustomFileSize=200000; // Maximum amount of Bytes allowed to each player for his custom files like face and music Kickduplicate=1; // Each ArmA version has its onw ID. If kickduplicate is set to 1, a player will be kicked when he joins a server where another player with the same ID is playing. verifySignatures=0; // Verifies the players files by checking them with the .bisign signatures. Works properly from 1.08 on equalModRequired=0; // If set to 1, player has to use exactly the same -mod= startup parameter as the server. // VOTING voteMissionPlayers=1; // Tells the server how many people must connect so that it displays the mission selection screen. voteThreshold=0.33; // 33% or more players need to vote for something, for example an admin or a new map, to become effective // INGAME SETTINGS disableVoN=1; // If set to 1, Voice over Net will not be available vonCodecQuality=0; // Quality from 1 to 10 persistent=1; // If 1, missions still run on even after the last player disconnected. 3rdPersonView=0; // Probably does not work here, should be set in the .armaprofile file of the server difficulty="veteran"; // Probably does not work here, should be set in the .armaprofile file of the server // SCRIPTING ISSUES onUserConnected=""; // self-explaining onUserDisconnected=""; doubleIdDetected=""; regularCheck=""; onDifferentData=""; onUnsignedData="server globalChat format['Player %1 is using unsigned data.', (_this select 0)];"; // unsigned data detected onHackedData=""; // tampering of the signature detected, see also verifySignatures above // MISSIONS CYCLE (see below) class Missions { };

===ArmA Demo Configuration=== When running the ArmA: Demo in server mode, there are 3 multi player missions included. The following example is for the missions included with the demo only. class Missions { class MPCTF_01 // name for the mission, can be anything { template = M02CaptureTheFlag.SaraLite; cadetMode = 1; // difficulty 0=veteran 1=cadet (not only AI, but radar, map etc) }; class MPCOOP_01 // name for the mission, can be anything { template = M01Cooperative.SaraLite; cadetMode = 1; // difficulty 0=veteran 1=cadet (not only AI, but radar, map etc) }; class MPCTI_01 // name for the mission, can be anything { template = M03ConquerTheIsland.SaraLite; cadetMode = 1; // difficulty 0=veteran 1=cadet (not only AI, but radar, map etc) }; };

Please note that all contributions to Bohemia Interactive Community may be edited, altered, or removed by other contributors. If you don't want your writing to be edited mercilessly, then don't submit it here. You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see Project:Copyrights for details). DO NOT SUBMIT COPYRIGHTED WORK WITHOUT PERMISSION! Summary:

This is a minor edit Watch this page Cancel | Editing help (opens in new window) Retrieved from "http://community.bistudio.com/wiki/server.cfg" Views 

   * Article
   * Discussion
   * Edit
   * History
   * Move
   * Watch

Personal tools 

   * Sir hC
   * My talk
   * Preferences
   * My watchlist
   * My contributions
   * Log out

Navigation 

   * Main Page
   * Community portal
   * Current events
   * Recent changes
   * Random page
   * The Village Pump
   * Help

Search

Toolbox 

   * What links here
   * Related changes
   * Upload file
   * Special pages

Buy ArmA now! MediaWiki 

   * Privacy policy
   * About Bohemia Interactive Community
   * Disclaimers
Retrieved from "https://community.bistudio.com/wiki?title=Arma_2:_Basic_Server_Config_File&oldid=38635"