Sound: SoundShapes – Arma 3

SoundShapes allow sounds to have different volumes depending on whether the listener is inside or outside a soundShape with a transition inbetween. You can direct and point these shapes so that a sound is only heard in front of a vehicle for example. Underlying tech in ArmA 3 - Microsoft XAudio2 SoundCone

Currenty only "cone" type shapes are available and they are configured within cfgSoundShapes. Two examples:

class CfgSoundShapes
{
	class FrontSemispace60
	{
		type = "cone"; //type of shape, currently only cone available, check XAudio2 reference
		innerVolume = 1; //volume when inside innerAngle area of cone, typically 1
		outerVolume = 0.001; //volume when outside outerAngle area of cone, typically lower 
		innerAngle = 135; //inner cone size in degrees, check XAudio2 reference
		outerAngle = 225; //outer cone size in degrees, check XAudio2 reference
		azimuth = 0; //direction of shape in degrees, 0 being FORWARD
		elevation = 0; //elevation of shape in degrees, 0 meaning NO ELEVATION
	};
	class LeftBottomSemispace10
	{
		type = "cone";
		innerVolume = 1;
		outerVolume = 0.316228;
		innerAngle = 135;
		outerAngle = 225;
		azimuth = -90; //direction of shape in degrees, -90 being 90 degrees LEFT
		elevation = -90; //elevation of shape in degrees, -90 being 90 degrees DOWN
	};
};

These are two BI default soundShapes. The naming scheme tells us what direction the cone is facing and how quiet the signal will be outside the cone. 60 means 60dB quieter, 10 means 10dB quieter. To use soundShapes in soundSets, add "shape" parameter to soundSet. If you want to use custom soundShapes, create them in class cfgSoundShapes.

When the listener is BETWEEN inner and outer angles, the volume will be scaled between inner & outerVolume values.