Arma Reforger:Character Gear Creation/Headgear/Asset Preparation

ⓘ

Previous part - Headgear

ⓘ

Next part - Prefab Configuration

💬

Overview

This chapter covers following topics:

• Adjusting model to reference head
• Creating skeleton & applying skinning to helmet
• Creating animated colliders
• Creating item variants models

Mesh Preparation

General

When it comes to character gear, you might notice that default rotation of character is different compared to other assets. This is caused by the fact, that in game animations are created using motion capture & Motion Builder software, which expects different orientation that the game.

⚠

It is no longer necessary to rotate equipment by 180 degrees - keep in mind though that Character_Template.FBX & Head_Template.FBX have orientation set in a way, which allows to use this model in creation of animations in Motion Builder or similar software.

Positioning of helmet without any reference points is quite tricky and that's why it might be handy to load some reference model. To do so, perform following steps:

• Import HeadSize_Template.fbx into scene with your model
  • This special contains all vanilla heads available molded into one entity - with this you can ensure that there will be no clipping with any of the existing models
• Adjust position of the helmet and straps so it fit that universal head

If everything went fine, you should end up with something like this:

Once you verified that helmet model doesn't need more adjustments, delete HeadSize_Template mesh from the scene since it will be no longer necessary.

Rigging

After properly positioning model, it is time for getting skeleton in and then rigging the asset. Sample Helmet is an asset imported from A3, so it already has some skinning on it, which in case of helmets will be fully usable but if you have some fresh asset, you can consider two options, which are described below.

In any case, first step on to do list will be importing of skeleton and empty bones from template file.

Importing skeleton

Armature and Empty Objects necessary for equipment to be animated in game

Importing skeleton into scene where you have your helmet can be done in few simple steps:

• Keep your Blender instance with helmet open
• Download & then open Character_Weights_Template.blend file in 2nd instance of Blender
• Switch to Object Mode
• Unhide Memory Points collection and select all empty objects over there (there should be six of them in total)
  • Tip: You can select multiple empty objects Left Shift modifier
• Copy all those objects with Ctrl + C combination
• Switch over to Blender instance containing your helmet and paste objects into Blender with Ctrl + V shortcut

After that, verify that in primary instance of the Blender (the one with helmet model) following things are true:

• Make sure that you also imported empty objects (from Memory Points collections)
• Armature object is called Armature - keep it this way! When asset is imported into Workbench, Armature name at the top of the skeleton is ignored
• It is important that model contains only Armature and empty objects from the template!
  • In total, 163 bones/empty objects (156 bones and 6 dummy objects) should be present when model is imported into Workbench - see note in Importing model section

Skinning asset

Once skeleton is present in the scene, it is possible to start process of skinning mesh to the bones. This can be using one of two methods listed below

Transfer weights

Currently, only Basebody_Male_Head_01.xob has its face skinned and there are no facial animations yet it in-game, so it's rather tricky to verify if weights are working correctly. In any case, weights transfer is

ⓘ

In this article, Enfusion links are used. With those links it is possible to open specific resource just by simply clicking on that link. Enfusion links has to be manually activated in Workbench options (Workbench -> Options -> Workbench -> Register "enfusion://" protocol) before it can be used]

In any case, weights transfer can be done in following steps:

• Copy reference mesh (f.e. Character_Weights_Template.blend can be used) to the scene with helmet
• Select reference mesh
• Select Helmet mesh with & ⇧ Shift
  • You might want to separate chin strap to separate object and keep helmet hard shell assigned to Head vertex group
• Switch to Weight Paint mode
• From the menu in top left corner, select Weights -> Transfer Weights option
  • In bottom left corner of the viewport, there should be now Transfer Mesh Data menu which you can expand
  • Change Source Layers Selection to By Name
• Click with somewhere in the viewport to confirm the transfer

✩

Tip: You can also use Sample Helmet as source object for weight transfer.

Manual skinning

Vertex Groups present in Object_LOD0

If you don't want to use transfer weight tool or you quickly want to test if helmet is working in game, then you can skin the helmet manually. To do so, perform following actions:

• Select helmet model (in this case Object_LOD0) and switch to Object Mode
• Navigate to Data tab in Properties window and locate Vertex Group section
• Add appropriate Vertex Groups for your helmet via + button (1)
  • Once vertex group is added, you can change its name by double clicking on it with

Now, depending whether you want to simply assign everything to one bone (for instance when you are doing a hat or you don't want to skin chin strap to chin yet), you can either chose one of the options:

Simple skinning

As title suggest, this skinning is very simple - whole mesh will be basically skinned to single bone - Head. To do

• Add just one Head vertex group via + button (1) located at the right side

• Switch to Edit Mode while having Object_LOD0 selected and select all faces with i.e. Ctrl + A shortcut
• Click on Head vertex group and then click on Assign button

✩

Tip: Alternatively, if you are using model from A3, you can also try to renaming Vertex Groups so they match Arma Reforger bones

Weight Painting

Using weight paint allows you to skin influences between maximum 4 bones. In order to achieve that, perform following actions:

• Switch to Weight Paint mode
• Create vertex groups for things you want to skin - in case of helmet with chin strap, FacialJaw & Head bone would be sufficient
• Select one of the vertex groups and starts painting weights with

• 
• 
• 

ⓘ

Vanilla helmets are right now only using one bone - Head - for whole model (including chin strap) although that might change in the future.

Armature modifier

Once asset is skinned with one of the above methods, there is one more thing to do in order to link vertex groups with skeleton and thus achieve animated asset:

• In Modifiers tab, add new Armature modifier via Add Modifier (1) button
  • In Object property, select Armature as object to deform with

After that, you could quickly verify if asset is skinned by selecting Armature and switching to Pose Mode. In this mode you can try to move bones and see if mesh is following them.

Colliders

Helmets in Arma Reforger are using actual colliders for protection of the character so its quite important to set it correctly.

Creating colliders

First step towards creating proper collider will be making of a new object, which should receive one of the colliders prefixes (in this case UTM_ prefix was used). For instance, sometimes it is feasible to create nice collider out of regular mesh by removing all unnecessary elements and then decimating it below ~150 faces. Other option is to create mesh from scratch which shouldn't be that big task in case of helmet but it might be bit more time consuming so choice is up to creator.

In both cases, here are few things to consider:

• Shape should fit the helmet
• Should be fairly simple
  • It is not recommended to use exact thickness of the helmet - instead it is enough to use material with predefined thickness
• UTM (Trimeshes) colliders can be used

Once collider is done, it will be necessary to connect it to one of the existing colliders. Due to nature of colliders, they don't support skinning and they have to be parented to bone via Relations

Setting relations: Using Make Parent

Any object can be quite easily parented via Make Parent action. To do so, perform following steps:

• Select collider object
• Select Armature as second object with Left ⇧ Shift + combo
• Switch to Pose Mode with both objects selected
• Select Head bone
  • Tip: you can turn on bone names for easier navigation!
• Open Menu Search ( ↹ Tab using Industry Compatible Keymap )
  • Search for Make Parent &  select it
  • Select Bone in Set Parent To menu
  • In Make Parent menu in bottom left corner select Keep Transform option

Setting relations: Using Relations tab

• Create a new object and in Relations tab set relation to Head
  • Reposition collider to correct location
• If collider is suddenly very small, make sure that scale of the armature is correct

Creating material

Material Research

Before creation of material, it is good to perform some research about ballistic properties and material used on the item that you are making. Game wise, there are two properties that matter:

• Density
• Thickness

In case of Sample Helmet, which is ported A3 Avenger helmet, ZSh-1-2M was used a reference which is known outer shell is made of alloy and inner is made out of Aramid. Since you can't effectively make game material consisting out of multiple materials, aramid based material - hard_aramid_7.3mm.gamemat - was used as base.

hard_aramid_7.3mm.gamemat material is used on PASGT helmet, which is rated at Threat Level IIIA in NIJ classifications . In most case, density of the material can be found by searching for "name_of_material density". In case of PASGT, it is known that helmet is using Kevlar 29 aramid material. By looking for this material, you can find i.e. such result - Kevlar_Technical_Guide_0319.pdf . Over there, it is mentioned that density of Kevlar 29 material is 1.44 g/cm³. In case of game, different source was used, which used 1.65 g/cm3 as value.

⚠

Right now density doesn't influence penetration behavior per se. Therefor 32mm of Hard Aramid game material will behave exactly the same as 10mm Armor game material.

Quite often you might also find out that thickness of the helmet is not listed anywhere so you have to go bit creative there.

In this case, it can be done in two way - either by changing thickness value or by changing Kinetic Resistance of the material.

For sample helmet, thickness was increased and set to 10mm.

• Fill in those values to that new material and then adjust Kinetic Resistance so it matches desired protection level
  • You can use following spreadsheet for those calculations

Material Data section of Weapon Penetration List spreadsheet

Game Material creation

Once you have data, you can commence with creation of the material by performing following steps:

• Create new inherited material - usage of one of the existing materials is recommended or duplicate some existing material which inherits from one of the core materials. In case of Sample Helmet hard_aramid_7.3mm.gamemat was duplicated
  • Name that new material in a way, which represents its thickness (i.e. hard_aramid_10mm.gamemat )
  • This way, you will inherit for instance correct particle effects, sounds and decals
  • In vanilla game those visual & sound effects are still being worked on (0.9.9)
• Change Density, Thickness & Kinetic Resistance

Materials & Layer Preset

Next step will be assigning of material and layer preset to the collider itself. You can do it via Enfusion Blender Tools Object Tools or manually (in case you are using different 3D software). Once you know how to change material and layer preset, do following things:

• Set collider Layer Preset to FireGeo
• Assign game material - either one of the existing vanilla ones or the one you have created in previous step

Creating Item variant

One of the final steps in equipment preparation is creating a special item variant of the model. Such model is visible when i.e. given piece of equipment is placed on the ground. This can be done in few steps listed below:

• Make copy of your helmet (FBX/Blend) and open it
• Remove skeleton and all empty objects
• Modify model of helmet so it appears like lying on flat surface
  • For instance, straps can be deformed so they are resting on surface
• No skeleton is needed
• Collider can be even simpler shape, but it is also possible to reuse previously created one
  • Layer Preset is changed from FireGeo to ItemFireView
  • UCX or simple shapes are recommended
    • Mesh -> Convex Hull action can be used to create some convex mesh

• 

  Visual mesh - notice how chin strap was placed

• 

  Firegeometry

Importing model

One of the last steps in asset preparation is importing of model. Detailed procedure for importing mesh into Workbench can be found on FBX Import page and - if you want some practical example - also in Weapon Creation tutorial.

In any case, here is quick instruction how to do it - select both of the FBX files in Workbench and then click with on one of them. From the context menu, select Register & Import option and then select as Model option when asked how do you want to process given file.

• Make sure that Export skinning option is checked and reimport the model via Reimport resource button
• Make sure that you have 163 bones in total and there is at least one skinned bone - i.e. 1 + 162
  • In Details tab, you can find current amount of bones and dummies in Bones section. First number represents amount of bones and second, number of dummies. By default, bones which are not affecting any mesh (there is no Vertex Group representing it)

Material preparation

Sample Helmet material example

If importing of model went fine, new Enfusion Materials (emat) should be created in Data folder next to the model. Those new materials are called based on material name in 3D software and by default they are using MatPBRMaterial shader. Assuming you have already created PBR materials using for instance Substance Painter and BCR+NMO preset shared on Github and then imported them in game, you can assign those textures to BCR & NMO Maps fields in the material itself.

Once basic textures are assigned and visible in Resource Manager viewport, there is still one more thing to do, which will hide headgear in first person view . To do so, perform following steps

• Assign HeadClipping_A.edds texture to Opacity Map
• Enable both Allow User Alpha Bias & Disable User Apha in Shadow properties

With those parameters set in material, helmet should now correctly dissolve when you switch from 3rd person to 1st person view.

ⓘ

Next part - Prefab Configuration