Arma 3: Vehicle in Vehicle Transport

Vehicle in Vehicle Transport functionality was added in Arma 3 Apex expansion. For proper function it needs suitable transport vehicle with cargo space defined in model and in config. Transported vehicles on the other hand needs no special treatment - important is only their size (estimated from bounding box) and weight. There are multiple config parameters for both transport and transported vehicles which can be used for further tweaking of functionality.

Scripting commands

• Command Group: Vehicle in Vehicle Transport

Transport/transported Vehicles

Transported Vehicles

• only dimensions and weight of vehicle/object are important parameters
• if size is not defined in config, bounding box is used
• mass of loaded vehicle(s) is added to transport vehicle
• canBeTransported = 0; disables possibility for this specific vehicle to be transported in other vehicles
• there are also optional parameters for parachute
• all these parameters are overriding transport vehicle config - if they are not present, default values are used (vehicle can be transported and parachute defined in transport vehicle is used)

Transported Vehicle config example:

class VehicleTransport
{
	class Cargo
	{
		parachuteClass			= B_Parachute_02_F;	// Type of parachute used when dropped in air. When empty then parachute is not used.
		parachuteHeightLimit	= 40;				// Minimal height above terrain when parachute is used.
		canBeTransported		= 1;				// 0 (false) / 1 (true)

		dimensions[]			= { "BBox_1_1_pos", "BBox_1_2_pos" };	// Memory-point-based override of automatic bounding box
		// or
		// dimensions[]			= { { 0,0,0 }, { 3,2,1.5 } };			// alternatively, positions in model space (since 2.08)

		rotation = -90;								// (optional) Defines in which direction the vehicle gets rotated when its loaded into ViV cargo and will only fit when rotated
													// Only -90 and 90 are supported. Since v2.08
	};
};

Example of defined cargo space with two exits

Transport Vehicles

• functionallity is not restricted to vehicle type
• name of memory points placed on model must be same as the ones used in config
• cargo space can have multiple exit points
• loading area can be defined
• parachute models must be defined for dropping cargo in air

Transport Vehicle config example:

class VehicleTransport
{
	class Carrier
	{
		cargoBayDimensions[]		= { "VTV_limit_1", "VTV_limit_2" };	// Memory points in model defining cargo space
		// or
		// cargoBayDimensions[]		= { {0,0,0}, {10,10,10} };			// alternatively, positions in model space (since 2.08)

		disableHeightLimit			= 1;								// If set to 1 disable height limit of transported vehicles
		maxLoadMass					= 200000;							// Maximum cargo weight (in Kg) which the vehicle can transport
		cargoAlignment[]			= { "front", "left" };				// Array of 2 elements defining alignment of vehicles in cargo space.
																		// Possible values are left, right, center, front, back. Order is important.

		cargoSpacing[]				= { 0, 0.15, 0 };					// Offset from X,Y,Z axes (in metres)

		exits[]						= { "VTV_exit_1", "VTV_exit_2" };	// Memory points in model defining loading ramps, could have multiple
		// or
		// exits[]					= { {5,0,0}, {5,10,0} };			// alternatively, positions in model space (since 2.08)

		unloadingInterval			= 2;								// Time between unloading vehicles (in seconds)
		loadingDistance				= 10;								// Maximal distance for loading in exit point (in meters).
		loadingAngle				= 60;								// Maximal sector where cargo vehicle must be to for loading (in degrees).
		parachuteClassDefault		= "B_Parachute_02_F";				// Type of parachute used when dropped in air. Can be overridden by parachuteClass in Cargo.
		parachuteHeightLimitDefault	= 50;								// Minimal height above terrain when parachute is used. Can be overridden by parachuteHeightLimit in Cargo.

		class CargoTypeWhitelist										// Whitelist. If this isn't empty, only listed vehicles (isKindOf) can load into (since 2.10)
 		{
 			Boat_F = 1;													// In this case the transporter only carry boats, not cars or tanks etc
 		};
	};
};

Cargo Space Vehicle Sorting

• vehicles in cargo space can be centred and aligned
• handled via combined parameter "CargoAlignment" - it is an array of 2 elements
• Values can be front, back, center, left, right. Order of them is important.

Examples:

• if first one is "front" then front part of transport will be filled first. If then second word is left, it will be filled from left side, but still front first.
• VTOL example would be "center" and "front" so vehicles would be inserted in center line from front to back.
• Ferry example would be "left" and "front" so vehicles should loaded form top left corner to back.

• 

  Example 1: Two vehicles, horizontally centered in cargo space

• 

  Example 2: Multiple vehicles loaded, automatically sorted and aligned to top left corner of cargo space