P3D File Format - ODOLV7
Legend
see Generic FileFormat Data Types
Intro
CompressedStruct
ODOL7 uses (potentially) compressed arrays.
This obviously slows the engine down during loading. At the time of CWC development, game file sizes were important.
(potentially) compressed arrays are contained in a CompressedStruct
CompressedStructs are endemic to most blocks contained in the p3d.
CompressedStruct
{
ulong Count;
<type> Array[Count];
};
if Count * sizeof(<type>) exceeds 1023 bytes the array is compressed. The resulting array will be expanded using lzh compression exactly as found in pbo's (for instance)
After de-compression, the Count remains the same because it is a count of the arraytype.
For uncompressed arrays (byte count < 1024) the Count and data are treated 'as is'.
Thus for various Array <types>
*ulong Array: > 255 // 1024 / sizeof(ulong) *float thing[2]: > 127 // 1024 / 2*sizeof(float) *SomeStructure: > // count * sizeof (SomeStructure) > 1023
Note that potentially compressed arrays in these structures only have an known output length.
the decompressor therefore must work on infinite input length.
see example decompression at end of document
Odol7Stuct
ODOLV7
{
StandardP3DHeader Header;
LodStruct Lods[LodCount];
float Resolution[LodCount];
ulong Unknown; // typically 02 01 00 00
float Pair[2]; // typically 48 74 07 3F : 48 74 07 3F . pair is often the same
ulong Unknown[3] // typically 00 00 00 00 00 00 00 00 00 00 B0 0D
bytes Unknown[120]; // a mixture of floats and index values
bytes UnknownFlags[6]; // typically 01 00 00 01 00 16
ulong Count;
float Array[Count]; // potentially compressed
float UnknownFloats[4];// almost consistently 00 00 00 00 : F9 02 15 50 : 00 00 48 43 : 0A D7 A3 3B
ulong UnknownLongs[3]; // generally FF FF FF FF FF FF FF FF FF FF FF FF
};
StandardP3DHeader
StandardP3DHeader
{
char Signature[4]; //"ODOL"
ulong Version; // 7
ulong LodCount; // at least one
}
LodStruct
LodStruct
{
structs VerticesStructs[...];
float Unknown[12]; // contains some max/min vertices positions
struct TexturesStruct[...];
structs TableStructs[...];
struct FacesStruct[...];
struct UnknownStruct[...];
ulong nNamedSelections;
NamedSelection NamedSelections[nNamedSelections];
ulong nNamedProperties;
NamedProperty NamedProperties[nNamedProperties];
ulong nFrames;
Frame Frames[nFrames];
ulong Unknown[3];
struct ProxiStruct[...];
};
VerticesStructs
VerticesStructs
{
CompressedStruct Attribs
{
ulong Count; // if > 255 then array is compressed
ulong Attribs[Count];
}
CompressedStruct UVset
{
ulong Count; // if > 127 then array is compressed
float UVset[Count];
}
struct Position
{
ulong Count;
float Position[Count][3]; // XZY
}
struct Normals
{
ulong Count;
float Normals[Count][3]; // XZY
}
}
- Count is the same value for all four tables.
- The Position and Normals tables appear to be always uncompressed raw data.
TexturesStruct
struct Textures
{
ulong Count;
asciiz Textures[...]; // "data/1.paa\0data/2.paa\0"...
}
Count corresponds to the number of concatenated strings. It is required, since, architecturally at least, one of more of the asciiz strings could be null.
TableStruct
struct TableStruct
{
CompressedStruct
{
ulong Count; // if > 511 etc
ushort MlodIndex[Count];
}
CompressedStruct
{
ulong Count; // this Count is same value as any Vertices.Count
ushort OdolIndex[Count];//
}
}
Tables are used to join vertices. Each face has got 3 or 4 vertices that are unique for each face Eg. Every vertex is owned only by 1 face.
MLODvertexindex = MlodIndex[ OdolIndex[ODOLvertexindex] ];
FacesStruct
struct Faces
{
ulong FacesCount;
ulong unknown;
struct Face
{
ulong Attribs;
short TextureIndex;
byte Count; // always 3 or 4
ushort VerticesIndex[Count];
}[FacesCount];
};
The TextureIndex is a zero based array. If set to -1, there are no textures for this face.
LOD Sections
LODSections
{
ulong nSections;
Sections[nSections]
{
ulong FaceLowerIndex;
ulong FaceUpperIndex;
ulong UserValue;
short TextureIndex; // -1 if not textured
ulong ODOL_FaceFlags;
};
}
NamedSelection
NamedSelection
{
asciiz name;
CompressedStruct Vertices
{
ulong Count; // if > 511 then array is compressed
ushort Vertices[Count];
}
CompressedStruct UnknownUshort
{
ulong Count; // if > 511 then array is compressed
ushort Unknown[Count];
}
CompressedStruct UnknownUlong
{
ulong Count; // if > 255 then array is compressed
ulong Unknown[Count];
}
byte IsSectional;
CompressedStruct UnknownUlong2
{
ulong Count; // if etc
ulong Unknown[Count];
}
CompressedStruct Faces
{
ulong Count; // if etc
ushort Faces[Count];
}
CompressedStruct TextureWeights // probably
{
ulong Count; // if etc
byte TextureWeights[Count];
}
};
NamedProperty
NamedProperty
{
asciiz Name; // "noshadow\0"
asciiz Value; //"1\0"'
};
Frame
Frame
{
float FrameTime;
ulong nBones;
XYZTriplet [nBones];
};
ProxiStruct
ProxiStruct
{
ulong Count;
struct Proxi
{
asciiz Name;
float rotationMatrix[9];
float translation[3];
ulong Index[2];
}[Count];;
}
LZ in ODOL
Lempel-Ziv compression
Note1.
Regardless of method, 4 extra bytes representing the checksum exist at end of the data count.
Note2. The compression code is identical to that employed by pbo packed structures. However, unlike pbo's, the size of the compressed data is unknown, only it's ultimate length. The code below fudges it.
pascal code
function LZBlockRead(var F:file; var outdata:array of byte;szout:integer):byte;
var
k, r, pr, pi,po,i,j:integer;
flags:word;
buf:array[0..$100e] of byte;
c:byte;
crc:integer;
begin
po:=0;
pi:=0;
flags:=0;
r:=0;
for k := 0 to $100F-1 do buf[k] := $20;
while (po < szout) do
begin
flags:= flags shr 1;
if ((flags and $100)= 0) then
begin
BlockRead(F,c,1); // direct reading from file
inc(pi);
flags := c or $ff00;
end;
if (flags and 1)=1 then
begin
if (po >= szout)then break;
BlockRead(F,c,1); // direct reading from file
inc(pi);
outdata[po] := c;
inc(po);
buf[r] := c;
inc(r);
r :=r and $fff;
end
else
begin
i:=0;
BlockRead(F,i,1); // direct reading from file
inc(pi);
j:=0;
BlockRead(F,j,1); // direct reading from file
inc(pi);
i :=i or ((j and $f0) shl 4);
j := (j and $0f) + 2;
pr := r;
for k := 0 to j do
begin
c := buf[(pr - i + k) and $fff];
if (po >= szout) then break;
outdata[po]:= c;
inc(po);
buf[r]:= c;
inc(r);
r :=r and $fff;
end;
end;
end;
BlockRead(F,crc,4); // 4 byte checksum.
result:= pi;
end;
C code
int Decode(unsigned char *in,unsigned char *out,int szin,int szout)
{
szin = szin > 0? szin: 0x7fffffff;
int i, j, k, r = 0, pr, pi = 0,po = 0;
unsigned int flags = 0;
unsigned char buf[0x100F], c;
for (i = 0; i < 0x100F; buf[i] = 0x20, i++);
while (pi < szin && po < szout)
{
if (((flags >>= 1) & 256) == 0)
{
if(pi >= szin)break;
c = in[pi++];
flags = c | 0xff00;
}
if (flags & 1)
{
if(pi >= szin || po >= szout)break;
c = in[pi++];
out[po++] = c;
buf[r++] = c;
r &= 0xfff;
} else
{
if(pi + 1 >= szin)break;
i = in[pi++];
j = in[pi++];
i |= (j & 0xf0) << 4;
j = (j & 0x0f) + 2;
pr = r;
for (k = 0; k <= j; k++)
{
c = buf[(pr - i + k) & 0xfff];
if(po >= szout)break;
out[po++] = c;
buf[r++] = c;
r &= 0xfff;
}
}
}
return pi;// next 4 bytes = checksum
}