DialogControls-Text
TokenNames common to most controls, such as x,y,w,h,text,idc... are not listed here.
CT_STATIC=0
Static controls represent exactly that: static data. Static means there is NO possible user interaction. CT_STATIC is primarily used for texts, dialog backgrounds, pictures (and video). The constant type property for these controls usually is CT_STATIC.
| Properties | ||
|---|---|---|
| Name | Type | Remark |
| autoplay | boolean | video only |
| blinkingPeriod | float (Seconds) | Makes the text start transparent, go to full opacity and back to full transparent in the amount of time specified. |
| key | string | a possibly quite useless xbox value |
| loops | integer | video only |
| lineSpacing | float | line spacing. Required, if the style was set to ST_MULTI. |
| fixedWidth | boolean? | |
| shadow | float | optional shadow style: 0 = none (default), 1 = drop shadow, 2 = outline |
Static Text
Most often this type of control will be used to add text to dialogs. If you want the text to change dynamically while playing the mission, you should set the idc property to a positive number, which allows usage of the ctrlSetText function. Text alignment can be controlled using the style property and the ST_* constants.
By default, this will only display a single line (and cut the overflow); use ST_MULTI if you intend to use multiple lines. This also requires setting the property lineSpacing, which indicates the relative space between lines; usually, you can set this to 1 for normal line spacing.
- Example:
class RscText
{
access = 0;
type = CT_STATIC;
idc = -1;
style = ST_LEFT;
w = 0.1; h = 0.05;
//x and y are not part of a global class since each rsctext will be positioned 'somewhere'
font = "TahomaB";
sizeEx = 0.04;
colorBackground[] = {0,0,0,0};
colorText[] = {1,1,1,1};
text = "";
fixedWidth = 0;
shadow = 0;
};
class dialog
{
class controls
{
class Background: RscText
{
text = "whatever";
colorBackground[] = {0,0,0,1};
x = 0; y = 0; w = 1; h = 1;
colorText[] = {0,0,0,0};
};
};
};
Static Lines
class MyLine:RscText
{
style = ST_LINE;
colorText[] = {0.2941,0.8745,0.2157,1.0}; // to whatever gives you a thrill
};
Static Background
One can also use this control type to add solid background to dialogs by simply leaving the text property empty. This way, it will look like a regular rectangle.
- Example:
class MyRedBackgroundExample {
/* ... same as the text example, except for */
colorBackground[] = { 1, 0.1, 0.1, 0.8 };
text = "";
};
Static Pictures
Using specific style constants you can enhance your dialogs with pictures too. These pictures should reside in your mission folder as paa-files. Then set your style property to ST_PICTURE (to display it once) or ST_TILE_PICTURE (to tile it) and use the text property to locate the paa image you want to use, relative to your addon or mission folder (absolute paths cannot be used).
- Example:
class RscPicture
{
access = 0;
type = CT_STATIC;
idc = -1;
style = 48;//ST_PICTURE
colorBackground[] = {0,0,0,0};
colorText[] = {1,1,1,1};
font = "TahomaB";
sizeEx = 0;
lineSpacing = 0;
text = "";
fixedWidth = 0;
shadow = 0;
};
class dialog
{
class controls
{
class Picture: RscPicture
{
text = "#(argb,8,8,3)color(1,1,1,1)";
or
text = "mypicture.paa";
x = 0.46;
y = 0.63;
w = 0.08;
h = 0.1;
colorText[] = {0.4,0.6745,0.2784,1.0};// whatever gives you a thrill
};
};
};
Static Videos
All setings are same as for pictures, only source file must be of .OGV format. Two additional properties are available - autoplay (when 1, video starts automatically) and loops (defines how many times video will be played in loop).
For video encoding, you can use:
- ffmpeg2theora: http://www.v2v.cc/~j/ffmpeg2theora/download.html
- Theora Converter .NET: http://sourceforge.net/projects/theoraconverter/ (GUI for ffmpeg2theora)
- Example:
class MyVideoExample {
/* ... same as the picture example, with addition of */
text = "myVideo.ogv";
autoplay = 1;
loops = 10;
};
CT_STRUCTURED_TEXT=13
The Structured Text control can display Structured Text. This is a separate data type in Arma.
Structured Text can not only hold some text values, it also can contain some attributes to format the text, as you can see in the example picture below.
You can contain a subclass Attributes to change the default attributes for your control. But the Attributes class and all of its attributes are optional and must not be specified.
| Properties | ||
|---|---|---|
| Name | Type | Remark |
| Attributes | class | see below |
| ShowImage | boolean | found in an xbox dialog and probably quite useless |
| Optional SubClass Attributes Properties | |||
|---|---|---|---|
| Name | Type | Remark | Default Value |
| font | string | fontname to use | "Zeppelin32" |
| color | string | text color defined in HMTL-like syntax. | "#ffffff" |
| align | string | align of text. Values can be "left", "center" or "right" | "center" |
| valign | string | vertical align of text. Values can be "top", "middle", "bottom". | "middle" |
| shadow | integer | affects the shadow of the text. | 1 (true) |
| shadowColor | string | shadow color defined in HMTL-like syntax. | "#000000" |
| size | float | Set the size of the text where 1 is the size value of parent class. | 1 |
The following example uses almost the same code as the controls shown in the example screenshot.
- Example:
class MyRscStructuredText {
idc = -1;
type = CT_STRUCTURED_TEXT; // defined constant
style = ST_LEFT; // defined constant
colorBackground[] = { 1, 1, 1, 1 };
x = 0.1;
y = 0.1;
w = 0.3;
h = 0.1;
size = 0.018;
text = "";
class Attributes {
font = "TahomaB";
color = "#000000";
align = "center";
valign = "middle";
shadow = false;
shadowColor = "#ff0000";
size = "1";
};
};
- Helpful Script Commands:
ctrlSetStructuredText, lineBreak, parseText, composeText, image
CT_HTML=9
The HTML control is well known as the "notebook" in the Map-View of the game. It can display a text over more pages and can inherit links to other, own defined sections. It has some simple formatting possibilities. It also can display images.
| Properties | ||
|---|---|---|
| Name | Type | Remark |
| align | string | "center" |
| cyclelinks | boolean | |
| filename | string | the html file to load into the control at startup |
| text | string | the text the control should display. Leave it blank, if you set a filename |
| colorBold | color array | color of bold text (between <b> and tags) |
| colorLink | color array | text color of links (between <a href="#Sectionname> and </a>) |
| colorLinkActive | color array | text color of the active link (normaly the fist on in page) |
| colorPicture | color array | color of transparent part of image |
| colorPictureBorder | color array | color of the borader arround image |
| colorPictureLink | color array | color of transparent part of image within links |
| colorPictureSelected | color array | color of transparent part of image within active links |
| tooltipColorText | color array | |
| tooltipColorBox | color array | |
| tooltipColorShade | color array | |
| prevPage | string argb | filename of image which is used as left arrow |
| nextPage | string argb | filename of image which is used as right arrow |
| Properties of subclass (H1-H6,P) | ||
| Name | Type | Remark |
| font | string | font to use for default text |
| fontBold | string | font to use within bold tags |
| sizeEx | float | font size |
The following example uses almost the same code as the controls shown in the example screenshot.
- Example:
class MyRscHTML {
idc = -1;
type = CT_HTML; // defined constant (9)
style = ST_LEFT; // defined constant (0)
x = 0.1;
y = 0.1;
w = 0.6;
h = 0.5;
filename = "test.html";
text="";
colorBackground[] = {1,1,1,0.5};
colorBold[] = {1, 0, 0, 1};
colorLink[] = {0, 0, 1, 1};
colorLinkActive[] = {1, 0, 0, 1};
colorPicture[] = {1, 1, 1, 1};
colorPictureBorder[] = {1, 0, 0, 1};
colorPictureLink[] = {0, 0, 1, 1};
colorPictureSelected[] = {0, 1, 0, 1};
colorText[] = {0, 0, 0, 1};
prevPage = "\ca\ui\data\arrow_left_ca.paa";
nextPage = "\ca\ui\data\arrow_right_ca.paa";
class H1 {
font = "Zeppelin32";
fontBold = "Zeppelin33";
sizeEx = 0.02474;
};
class H2 {
font = "Zeppelin32";
fontBold = "Zeppelin33";
sizeEx = 0.0286458;
};
class H3 {
font = "Zeppelin32";
fontBold = "Zeppelin33";
sizeEx = 0.0286458;
};
class H4 {
font = "Zeppelin33Italic";
fontBold = "Zeppelin33";
sizeEx = 0.0208333;
};
class H5 {
font = "Zeppelin32";
fontBold = "Zeppelin33";
sizeEx = 0.0208333;
};
class H6 {
font = "Zeppelin32";
fontBold = "Zeppelin33";
sizeEx = 0.0208333;
};
class P {
font = "Zeppelin32";
fontBold = "Zeppelin33";
sizeEx = 0.0208333;
};
};
- Helpful Script Commands: