CfgVehicles Config Reference: Difference between revisions

 armorBody = 0.4; // default
// for vehicles general
 armorStructural= 1; //ranges between 1 and 4.0, default 1
 armorFuel = 1.4;// default
 armorGlass = 0.5;// default
 armorLights = 0.4; // default 0.4 in all models.
 armorWheels = 0.05;//default
// for tanks
 armorHull = 1;
 armorTurret = 0.8;
 armorGun =    0.6;
 armorEngine = 0.8;
 armorTracks = 0.6;
// for men
 armorHead = 0.7;
 armorBody = 0.8;
 armorHands = 0.5;
 armorLegs = 0.5;
// helicopters
 armorHull = 0.5;
 armorEngine = 0.6;
 armorAvionics = 1.4;
 armorVRotor = 0.5;
 armorHRotor = 0.7;
 armorMissiles = 1.6;
 armorGlass = 0.5;

attendant

Bool: Default false

Used for 'vehicles' to repair other 'vehicles'. Thus a hospital has an attendant that can repair soldiers. Adds the action "Heal at XXX"

 attendant = true;

Related TokenNames: #hiddenSelections

audible

float: Default Value 1

 audible = .05; //man
 audible = 3;//motorcyle
 audible = 6;//tank/ship

how loud you are

see #camouflage

autocenter

bool: Default true

    autocenter = false; // man

axis

axis = osa_poklop_driver;

see #Indicator... Class Or #Hatch... Class, IndicatorWatch Class

B

body

   body = "mainTurret";

see #Turret Class

brakeDistance

Float: default 5 meters per sec

  brakeDistance=   1; // man
  brakeDistance=  14; // tank
  brakeDistance= 500; // plane
  brakeDistance= 50;  // boat

brightness

   brightness = 1.0;

See #Reflectors Class, #Light Class, #CargoLight Class

C

...CanSee

Integer

Used on vehicles that have zoom.

 commanderCanSee = 31;//default
 gunnerCanSee = 4+8+16;//default
 driverCanSee = 2+8+16;//default

...CargoAngleY

Integer Degrees

found within vehicle classes

 initCargoAngleY = 185; //Truck5t
 initCargoAngleY = 90;//M113

 initCargoAngleY = 10; // UH60
 minCargoAngleY = -60;
 maxCargoAngleY = 120;

camouflage

Float: Default Value = 2.

how difficult to spot. bigger = easier

camouflage = 0.6; // snipers
camouflage = 1; // man
camouflage = 4; // trucks
camouflage = 8; // tanks

what is the relationship between this and #accuracy?

can...

canBeShot

ArmA Boolean: Declares whether bullets have any effect

canBeShot = true;

canDeactivateMines

Boolean: Default false

part of the man class.

 canDeactivateMines= true; //SoldierEngineer

canFloat

Boolean: Default value: false

Used to allow vehicles (such as BMP) not to sink !

 canFloat = true;

canHideBodies

Boolean: Default false

part of the man class.

 canHideBodies = true; //SoldierWSaboteur

canLock

Arma Boolean:

canLock = 0;

$\sum _{n=0}^{\infty }{\frac {x^{n}}{n!}}$

cargoIsCoDriver

Variable Boolean Array : Default {false};

This token declares which (if any) cargo positions are 'in the front' (Ie front windscreen)

  cargoIsCoDriver[] = {true,true,false};// 1st two passenger positions for a 5T truck

The number of elements in this array correspond to the #transportSoldier value declared for this class model.

cast...Shadow

Boolean: Default false

castCargoShadow = false;
castCommanderShadow = false; 
castDriverShadow = false;
castGunnerShadow = true;

Normally used to shadow 'soldiers' standing up in vehicle objects, such as the MG Jeep and Machine Guns.

Classes Embedded

see #Embedded ClassNames

cloud...

Various(Strings,Floats,Arrays)

  cloudletDuration = 0.9;
  cloudletAnimPeriod = 1.0;
  cloudletSize = 0.1;
  cloudletAlpha = 0.8;
  cloudletGrowUp = 0.4;
  cloudletFadeIn = 0.0;
  cloudletFadeOut = 5.0;
  cloudletAccY = -0.1;
  cloudletMinYSpeed = 0.3;
  cloudletMaxYSpeed = 1.5;
  cloudletShape = "\ca\data\cl_basic";
  cloudletColor[] = {1,1,1,0};

cobraLight

ArmA String : Used as a core model for all other 'air' craft.

cobraLight = "AnyAddon\AnyP3d(.p3d)";

coefInside...

 coefInside = 2;// default
 coefInsideHeur = 4.3; // default

Used by the static class for non moving objects such as buildings

 coefInside = 1; // forest
 coefInsideHeur = 0.25;

color

Float Array: of floats.

  color[] = {0.8,0.8,1.0,1.0};

This is a fixed four dimension array consisting of the color values for a cmyk model.

See #Reflectors Class, #Light Class, #CargoLight Class, #Smoke Class

commanding

ArmA Integer: part of Turret class

    commanding = -1;

cost

Integer: Default Value 50,0000

This value reflects the attractiveness of the target to the enemy AI. When all other considerations are equal. A soldier eg is not interested in Air, despite it's highly attractive cost values. On the other hand, he is interested in a medic, since a medic (in normal configs) has a (while small) a higher cost, than others in the group, including the officer.

cost = 10000000;// an air vehicle is typically this value
cost = 8; // a medic;
cost = 1; // a grunt
cost = 4; // an officer
cost = 0; // most buildings;

Related TokenNames: type , #cost , #threat

count

String or Integer: (math formula).

weapon = M60;
count = "30*1";

this token is always associated in a weapon or magazine couplet, inside a TransportWeapons, or TransportMagazines class.

The value is mostly represented as a string as above (a math formula), or it can be (unusually)

count= 2;

crew

String: Default Civilian

Reflects whether vehicle is manned, and what with.

  crew = <ClassName>
  crew = "SoldierWPilot";

'SoldierWPilot' is a class declared in same file.

D

dammage...

Variable String Array:

 dammageHalf[] = {"\AnyAddon\AnyPAA.paa","\AnyAddon\AnyOtherPAA.paa", ...};
 dammageFull[] = {"\AnyAddon\AnyPAA.paa","\AnyAddon\AnyOtherPAA.paa", ...};

When 'vehicle' is considered at least half way to destruction, the series of pictures is applied to the model.

damper...

damperSize = 0.1;// default
damperForce = 3; //default

deltaT

Integer

 deltaT = -500;

density

String

  density = 0.5;

destrType

String: Default Value= DestructDefault

Used for animation, sound, and final 'look' of vehicle.

 destrType = "DestructNo"; // nothing happens
 destrType = "DestructBuilding"; // smoke. explosion
 destrType = "DestructEngine"; // smoke only
 destrType = "DestructTree"; // smoke, crushing, falls over
 destrType = "DestructTent"; // smoke, crushing, flattens
 destrType = "DestructMan";  
 destrType = "DestructDefault"; // =building

Tent and Tree are no longer identifiable when destroyed if not class 'things'

disappearAtContact

Bool: Default false;

  disappearAtContact = true;//FxCartridge

direction

string:

   direction = "konec L svetla";

see #Reflectors Class

displayName

String: Default value = "Unknown" or "Vehicle"

Selects object uniquely in the Mission Editor, and separately, is used to identify object in game according to #accuracy. For instance when pointing your men to an object while in a mission, it is this displayName that is used.

It is good practice to use a stringtable.csv that should accompany your addon so that

All names and labels are in one place instead of hunting for them.
For language differences

displayName = "$STR_DN_AH1Z";

Note, that will careful crafting of classes, different colored 'rocks' can all be called the same displayName (rock) in the mission itself. See #scope and #accuracy for details.

See #nameSound for definition of what is actually 'said'

displayNameShort

ArmA String:

 displayNameShort = "$STR_DN_UH60";

deltaT

Integer: This TokenName is used inside the #Smoke Class

   deltaT = -500;

density

Float: This TokenName is used inside the #Smoke Class

  density = 0.5;

driverIsCommander

Bool : Default false.

driverIsCommander = true;

For boat, MG Jeep and helicopters

see #has...

driverForceOptics

ArmA Bool

  driverForceOptics = true;

E

...Elev

Integers:Degrees

initElev = -80;
minElev = -60;
maxElev = 10;

part of any #Turret Class (tanks eg)

ejectDamageLimit

ArmA Float: You can get hurt, but you can't die with vals less than 1.0

 ejectDamageLimit = 0.750000;

ejectDead...

Boolean : Default false

 ejectDeadGunner = false;
 ejectDeadCargo = false;
 ejectDeadDriver = false;
 ejectDeadCommander = false;

Causes that unit to 'unmount' the vehicle. Such as an MG nest, or motorcycle.

ejectSpeed

Array: Default {0,40,0};

ejectSpeed[] = {0,0,0}; // cant eject in a cessna

Embedded ClassNames

Some Token Names are encountered only within an embedded classname, rather than the main 'vehicle' body.

An embedded classname conveniently adds a unique feature to the 'vehicle'. Such as smoke, such as, a turret for a tank.

Emmbedded class names are used extensively in animated buildings for the quite logical reason that identical Token Names for door1 cannot be the same as Door2.

Below is a list of embedded classnames that (in most cases) use a TokenName uniquely. It is not found elsewhere and is better served describing that Token Name in the context it is found in, ie, an embedded class.

Hatch... Class

 class HatchDriver {
  selection = poklop_driver;
  axis = osa_poklop_driver;
  angle = -100;
 };

Indicator... Class

 class IndicatorSpeed {
  selection = ukaz_rychlo;
  axis = osa_rychlo;
  angle = -240;
  min = 0;
  max = 60 / 3.6;
 };

Light Class

 class Light {
  ambient[] = {0.3,0.15,0.0,1.0};
  brightness = 0.08;
  color[] = {1.0,0.5,0.0,1.0};
  position = ohniste;
  shape = koulesvetlo;
  size = 0.3;
 };

CargoLight Class

 class CargoLight {
  ambient[] = {0.6,0,0.15,1};
  brightness = 0.007;
  color[] = {0,0,0,0};
 };

Reflectors Class

  Reflectors ::LandVehicle {
   ambient[] = {0.1,0.1,0.1,1.0};
   brightness = 0.25;
   color[] = {0.9,0.8,0.8,1.0};
   position = L svetlo;
   size = 0.5;
   direction = konec L svetla;
   hitpoint = L svetlo;
   selection = L svetlo;
  };

Smoke Class

 class Smoke {
  density = 0.5;
  deltaT = -500;
  in = 0.0;
  out = 0.0;
  initT = 1000;
  initYSpeed = 1.7;
  interval = 0.01;
  size = 0.1;
  timeToLive = 100000002004087730000.0;
  //
  cloudletDuration = 0.9;
  cloudletAnimPeriod = 1.0;
  cloudletSize = 0.1;
  cloudletAlpha = 0.8;
  cloudletGrowUp = 0.4;
  cloudletFadeIn = 0.0;
  cloudletFadeOut = 5.0;
  cloudletAccY = -0.1;
  cloudletMinYSpeed = 0.3;
  cloudletMaxYSpeed = 1.5;
  cloudletShape = cl_basic;
  cloudletColor[] = {1,1,1,0};
  class Table {
   class T1 {
    maxT = 0;
    color[] = {0.8,0.8,0.8,1};
   };
   class T2 {
    maxT = 900;
    color[] = {0.3,0.3,0.3,1};
   };
   class T3 {
    maxT = 1000;
    color[] = {1,0.5,0,0.5};
   };
  };
 };

Turret Class

(Tanks eg)

 class TurretBase {
  body = OtocVez;
  gun = OtocHlaven;
  gunAxis = OsaHlavne;
  gunBeg = usti hlavne;
  gunEnd = konec hlavne;
  minElev = -4;
  maxElev = 20;
  minTurn = -360;
  maxTurn = 360;
  soundServo[] = {Vehicles\gun_elevate,0.031623,1.000000};
  turretAxis = OsaVeze;
 };

Embedded TokenNames

see #Embedded ClassNames

enableSweep

Bool: Default true. Used by Helicopter class

 enableSweep = false; //UH60MG

envelope

ArmA Float Array

envelope[] = {0.000000,0.000000,0.300000,1.000000,2.500000,3.300000,3.500000,3.200000,2.500000,2.000000,1.500000,1.000000};

extCameraPosition[]

float Array: Default {0,2,-20};

extCameraPosition[] = {0,5,-30};//plane
extCameraPosition[] = {0,1,-10};//cars
extCameraPosition[] = {0,1.500000,-9};//tankls
extCameraPosition[] = {0,0.300000,-3.500000};//man

F

minFireTime

Integer: Default 20 seconds

  minFireTime = 20;

fired

ArmA String: Event Handlers

fired = "_this exec ""\AnyAddon\AnySQS.sqs"""; // note the ""

flapsFrictionCoef

Float: Default 0.5

 flapsFrictionCoef = 2; // can be integer too.

forceHide...

Boolean : Default false;

forceHideDriver = true;//shilka
forceHideGunner = true; //tank
forceHideCommander=true;

forceSupply

Boolean : Default

 forceSupply = true;

Found only in Weapon holders (ammo boxes) to force supply?

formation...

Integer:

formationX = 10;// default meters
formationZ = 20; // default meters
formationTime = 10; // default seconds

One or both X Z values are used to keep objects separated (in meters) depending on wedge, echelon, V,single line, fomations.

fov

Float

 fov = 0.85; // cessna
 fov = 0.85; // man
 fov = 1.0; // truck

...Fov

Float

 minFov = 0.420000;// man
 maxFov = 0.850000;
 minFov = 0.600000;//truck
 maxFov = 1.400000;

also used by ViewPilot Classes

fuelCapacity

Integer: Default Value 0 (litres)

 fuelCapacity = 50; // motorcyle
 fuelCapacity = 100; // car
 fuelCapacity = 700; // tank
 fuelCapacity = 1000; // air

G

...Gun...

Integer:degrees

 minGunElev = -60;
 maxGunElev = 60;
 minGunTurn = -5;
 maxGunTurn = 5;
 minGunTurnAI = -30;
 maxGunTurnAI = 30;

...GunnerMayFire

Boolean: Default false

     outGunnerMayFire = true;// m113
     inGunnerMayFire = false;

...GunClouds Class

This is a reference to the external WeaponCloudsGun classes

most models simply inherit the defaults

 class GunClouds:  WeaponCloudsGun{};
 class MGunClouds: WeaponCloudsMGun{};

here is an example of over-rides for class man

class GunClouds:WeaponCloudsGun {
  cloudletGrowUp = 0.200000;
  cloudletFadeIn = 0;
  cloudletFadeOut = 0.400000;
  cloudletDuration = 0.200000;
  cloudletAlpha = 1;
  cloudletAccY = 2;
  cloudletMinYSpeed = -10;
  cloudletMaxYSpeed = 10;
  interval = 0.020000;
  size = 0.300000;
  sourceSize = 0.015000;
 };

...GunFire Class

This is a reference to the external WeaponFireGun classes

most models simply inherit the defaults

 class GunFire: WeaponFireGun {};
 class MGunFire: WeaponFireMGun {};

gearRetracting

Bool: Default true

 gearRetracting = false; // cessna

more correctly viewed as HasRetractingGear.

gun

gun = OtocHlaven;

see #Turret Class

gunAimDown

ArmA Float

 gunAimDown = 0.07;

gunAxis

gunBeg

gunEnd

see#Turret Class

gunnerHasFlares

ArmA Boolean

  gunnerHasFlares = false;

gunnerName

ArmA String

   gunnerName = "$STR_POSITION_CREWCHIEF";

gunnerOutOptics...

ArmA String

     gunnerOutOpticsModel = "";

Array

     gunnerOutOpticsColor[] = {0,0,0,1};

Boolean

     gunnerOutForceOptics = false;

Boolean

     gunnerOutOpticsShowCursor = false;

H

...Height

ArmA Integer:

minHeight = 5; //Min height in metres above sealevel. 
maxHeight = 50;//max height above sea level.
avgHeight = 10;

has...

Bool:

 hasDriver = true; // default
 hasGunner = false;// default
 hasCommander =true; // default

Depending on vehicle model.

Controls the 'get in' commands.

see #driverIsCommander

...HeadTurnAI

Integer Degrees

 minHeadTurnAI = -70;// man class
 maxHeadTurnAI = 70;

hiddenSelections

String Array: Default none.

Here you can define selections on the model whose textures can be changed during the game with the command setObjectTexture. The index in this array is the selection number for the setObjectTexture command.

hiddenSelections[] = {"pruh"}; // bmp/tank

Try this setObjectTexture [0, "\data\duha.pac"] in the initline of a BMP and you'll see which parts are meant byx the selection pruh.

hide...

Bool

hideProxyInCombat =    false;// default (true for tanks)
hideUnitInfo =         false;// default see #unitInfoType
hideWeaponsCargo =     false;// default
hideWeaponsCommander=  true; // default
hideWeaponsDriver =    true; // default
hideWeaponsGunner =    true; // default

hitpoint

   hitpoint = "L svetlo";

See #Reflectors Class

hitSound...

 hitSound1[] = {voices\Hit11,0.056234,1};
 ...
 hitSound20[] = {voices\Hit30,0.056234,1};

 hitSounds[] = {hitSound1,0.05,hitSound2,0.05,....

hitSounds is used by the engine to reference user generated hitSound...s

the number of user generated sounds, is limited only by the author.

hour

part of the IndicatorWatch class

 class IndicatorWatch {
  hour = hodinova;
  minute = minutova;
  axis = osa_time;
  reversed = 0;
 };

I

icon

String: Default Value = "unknown_object.paa"

This value us used by the map editor to show the building or vehicle when editing. It is not normally visible during game play. (but can be)

The icon can be any jpg, paa, or pac file. paa is default. Note that Elite cannot handle jpegs.

 icon = "\AnyAddon\AnyPAA(.paa)";

Related TokenName(s): #mapSize

in/out

Float: These TokenNames are used inside the #Smoke Class

 in= 0.0;
 out=0.0;

init

ArmAString: Event Handler

  init = "[(_this select 0)] exec ""\AnyAddon\AnySqs.sqs"""; // note the ""

initT

Integer: This TokenName is used inside the #Smoke Class

   initT = 1000;

initYSpeed

Float: This TokenName is used inside the #Smoke Class

   initYSpeed = 1.7;

insideSoundCoef

Float: default 0.5

 insideSoundCoef = 0.05;// air vehicels are 2%

interval

Float: This TokenName is used inside the #Smoke Class

     interval = 0.01;

irScanGround

Bool: Default true.

Probaly used to stop ai looking down

 irScanGround = false; // tanks

irScanRange...

Integer: Default 0

 irScanRange = 4000; // outdated (since Resistance)
 irScanRangeMin = 500;  // tanks general
 irScanRangeMax = 4000;
 irScanRangeMin = 2000; // air
 irScanRangeMax = 10000;
 irScanRangeMin = 4000; // a vulcan
 irScanRangeMax = 10000;

irScanToEyeFactor

Integer: Default 1

 irScanToEyeFactor = 2;//air
 irScanToEyeFactor = 5;//shilka

irTarget

Bool: Default true.

Used for (some) buildings so that they don't show up on tank radar

 irTarget = false; // man

isBicycle

Bool: Default false.

this value inside the motorcycle class is used to turn it on when inheriting to a real bicycle

isMan

Bool: Default true.

 isMan = 1;

Defined within the man class

K

killed

ArmA String: Event Handler

  killed = "[(_this select 0),1,1,0,0] exec ""\AnyAddon\AnySQS.sqs""";// note the ""

L

ladders

Embedded Array: The ladders array is used to declare one or more ladder pairs inside the model.

ladders[] = { {"start","end" }                        };// a building with one ladder
ladders[] = { {"start1","end1" } , {"start2","end2" } };// two ladder building
//...etc

Note that unfortunately, the 'start' and 'end' labels are arbitrary for each model. You cannot have a generic ladder building as such.

laser...

Boolean: Default false

Determines if a vehicle has laser capability.

 laserScanner = true;
 laserTarget = true;// used as a generic class of All {} to default things true

landingAoa

MathFormula String Default 10*3.1415/180

Landing Angle of Approach. Used by plane class

 landingAoa = 7*3.1415/180;//Cessna

landingSpeed

Integer: Default 0 Kph.

 landingSpeed = 75; // plane vehicles

library

ArmA String: This TokenName is associated with the library class of a vehicle (if any). It is used to give a 'memo' style full screen info on the given object. Example of use:

 class Library
 {
  libTextDesc = "$STR_LIB_AH1Z";
 };

M

magazine

Array: used in TransportMagazines class this specifies the type of ammo in the magazine and the amount.

{
magazine = "30Rnd_556x45_Stanag";
count = "30*1";
}

Each of these couplets are contained within a 'weapon' classname within the magazineS class itself. Example

class TransportMagazines  {
  class _xx_M16 {
   magazine = M16;
   count = 30*1;
  };
  class _xx_M60 {
   ......
  };
  class _xx_PK {
   ......
  };
  ...
};

magazines

Variable string Array: default {}

see #weapons for proper description

mapSize

Float: Default Value = 10 (meters).

Used for the map editor to show the icon associated with this model class.

There is no x y component to this, the meaurement units are meters.

To creat a circular, rectangular or other 'non sqaure' image, you need to make a pac file for the icon with, a transparent layer.

 mapSize = 0.7; // small object such as a tree
 mapSize = 4; // a small'ish building

The Mission Editor map is not very good in this regard (as noted above). However, the main problem is the base classes of the engine. The mapSize= for most objects, particularly buildings, is a one shoe fits all. A forest, eg, is the same mapSize= as a tree !!!

Later Oem addons, *generally* are better and more specific in this regard, making position and fitting a little easier.

marker

ArmA String : used as a core for all other air craft when looking on map.

marker = "\AnyAddon\AnyP3d.(p3d")";

material

Integer:

Used in Hit... classes, eg HitTurret HitBody

  material = 50;

Related TokenNames: #armor (float), #material, #name, #passThrough

maxT

Integer: This TokenName is used inside the #Smoke Class

   maxT = 0;

min/max

String Degrees Math Formula

 min = 0;
 max = 60 / 3.6;

Note for readability, these values are normally expressed as strings which the engine itself will convert.

see Indicator Class

memoryPointExhaust...

ArmA String:

memoryPointExhaust = "exhaust_start";
memoryPointExhaustDir = "exhaust_end";

memoryPointGun

ArmA String:

   memoryPointGun = "machinegun";

memoryPointGunnerOptics

ArmA String

   memoryPointGunnerOptics = "gunnerview";

memoryPointGunnerOutOptics

ArmA String

     memoryPointGunnerOutOptics = "commander_weapon_view";

memoryPoint...Missile

ArmA String:

   memoryPointLMissile = "Missile_1";
   memoryPointRMissile = "Missile_2";

memoryPoint...Rocket

ArmA String:

   memoryPointLRocket = "Rocket_1";
   memoryPointRRocket = "Rocket_2";

memoryPointsGetIn...

ArmA String:

   memoryPointsGetInCargo = "pos_cargo";
   memoryPointsGetInCoDriver = "pos_codriver";
   memoryPointsGetInCommander = "pos_commander";
   memoryPointsGetInDriver = "pos_driver";
   memoryPointsGetInGunner = "pos gunner";

memoryPointsGetIn...Dir

ArmA String:

   memoryPointsGetInCargoDir = "pos_cargo_dir";
   memoryPointsGetInCoDriverDir = "pos_codriver_dir";
   memoryPointsGetInCommanderDir = "pos_commander_dir";
   memoryPointsGetInDriverDir = "pos_driver_dir";
   memoryPointsGetInGunnerDir = "pos gunner dir";

memoryPointSupply

ArmA String:

 memoryPointSupply = "supply";

memoryPointTrack...

ArmA String:

 memoryPointTrackFLL = "tyreTrack_1_1l";
 memoryPointTrackFLR = "tyreTrack_1_1r";
 memoryPointTrackBLL = "tyreTrack_1_2l";
 memoryPointTrackBLR = "tyreTrack_1_2r";
 memoryPointTrackFRL = "tyreTrack_2_1l";
 memoryPointTrackFRR = "tyreTrack_2_1r";
 memoryPointTrackBRL = "tyreTrack_2_2l";
 memoryPointTrackBRR = "tyreTrack_2_2r";

microMimics

String: Man class

This token refers to the class within the external cfgMimics class

 microMimics = Micro;

minute

part of the IndicatorWatch class

see #hour

model

String: Default Value= "empty.p3d"

Location in the addon where the p3d model resides.

model = "\AddonName\anyp3d(.p3d)";

Whera a class is not a visible 'object', such as a BaseClass. You can specify

model="";

this cuts down on load and access.

Related TokenName: #simulation, #reversed

moves

String: Default = NoDefaultMoves

applies to the man class and refers to a cfgMoves class

 moves = CfgMovesMC; // civilian, in fact, there isn't another

N

...NightLights...

 spotableNightLightsOff = 0.05; //default
 spotableNightLightsOn = 4;//default
  visibleNightLightsOff = 0.1; //default
 visibleNightLightsOn = 0.2;//default

name

  name = "motor";

Used in Hit... classes, eg HitTurret HitBody

Related TokenNames: #armor (float), #material, #name, #passThrough

nameSound

String: Default value: "Target"

Namesound is used by the AI audio to indicate verbally where to go, what 'vehicle' to attack. Thus the audio speech "move to 'rock' 3 o'clock' is derived from the nameSound.

nameSound = "rock";

Many different nameSounds can be selected. Here are just a few.

 nameSound = crew;
 nameSound = target; 
 nameSound = tank;
 nameSound = house;

The actual descriptive text accompanying the 'sound' can be different see #displayName

Typically, a collection of buildings (eg) will be configured as follows

class GenBuilding : NonStrategic
{
  scope=private; // internal use only
  VehicleClass="Some Editor Group Name";
  namesound="house";
};
class YellowBuilding: GenBuilding
{
  scope=public;
  name="YellowBuilding";
  model="Some yellow building.p3d";
};

noseDownCoef

Float: Default 1.0 used by Plane class

noseDownCoef = 0.025; // cessna

nightVision

Bool: Default false

nightVision=true;

present in lawsoldier, sniper, saboteur, tank, and air crew

noseDownCoef

Float

noseDownCoef = 0.025;

O

...OpticsColor

Float Array : Default {0,0,0,1};

 driverOpticsColor[] = {0,0,0,1};
 gunnerOpticsColor[] =    {0.910000,0.230000,0.230000,1};
 commanderOpticsColor[] = {0.910000,0.230000,0.230000,1};

...OpticsModel

String: Default ""

 commanderOpticsModel= "\AnyPbo\AnyP3d(.p3d)";
 driverOpticsModel = "\AnyPbo\AnyP3d(.p3d)";
 gunnerOpticsModel= "\AnyPbo\AnyP3d(.p3d)";

gunnerOpticsShowCursor

Bool

gunnerOpticsShowCursor = true;

P

passThrough

Bool: Default true

 passThrough = 1;

Used in Hit... classes, eg HitTurret HitBody

Related TokenNames: #armor (float), #material, #name, #passThrough

picture

String: Default: iaston.paa

I think this is for briefing Information icon click

 picture = "\AnyAddon\AnyPAA(.paa)";

position

  position = "ohniste";
  position = "L svetlo";

See #Reflectors Class, #Light Class

precision

 precision = 1; //man
 precision = 200;// air
 precision = 50;//boat

preferRoads

Bool: Default false

preferRoads = true; // all vehicles

primary

ArmA Boolean: For models that can have, (but don't necessarily do have) multiple internal objects of the same type (turrets eg). One of them, is declated the main, or primary turret. There may indeed be only one 'turret'.

  primary = true;

primary...

ArmA Boolean

     primaryGunner = false;
     primaryObserver = true;

proxyIndex

ArmA Integer

   proxyIndex = 2;

proxyType

ArmA String

     proxyType = "CPCommander";

R

...Radius

Represents a circular area (radius in meters from centre of object for action to take place

getInRadius=2.5;  //default
getInRadius=3.5;   // tank
getInRadius=10;  //ship
supplyRadius = 2.5; // for fuel dumps ammo trucks etc

...RotorSpeed

float: Helicopters

 mainRotorSpeed = 1.0; // default
 backRotorSpeed = 1.5; // default
 //
 mainRotorSpeed = 1.0; // ch47d
 backRotorSpeed = -1.0;

...RotorDive

float: Helicopters, Default 0.0

 minMainRotorDive = -9; // CH47D
 maxMainRotorDive = 15;
 neutralMainRotorDive = -5;
 minBackRotorDive = -15;
 maxBackRotorDive = 9;
 neutralBackRotorDive = -5;

ReloadAnimations Class

General useage in Helicopters, this class is 'looked for' by the engine. Varions models, but normally only one, are specified as follows

class ReloadAnimations {
 class SomeThingA  {
  ...
 };
 ...
 class SomeThingZ  {
  ...
 };
};

here is an example for an Mi24 helicopter

  class MachineGun30E {
   weapon = MachineGun30E;
   angle0 = 0;
   angle1 = -2 * 3.141592654;
   multiplier = 500;
   type = rotation;
   animPeriod = 0.500000;
   selection = gatling;
   begin = usti hlavne;
   end = konec hlavne;
  };

rotL/R

defined within a tank.Wheels class to describe the series of small wheels on each side

  rotR[] = {kolL1,kolL2,kolL3,kolL4,kolL5,kolL6,kolL7,kolL8};
  rotL[] = {kolP1,kolP2,kolP3,kolP4,kolP5,kolP6,kolP7,kolP8};
  upDownL[] = {koloP1,podkoloP1,koloP2,podkoloP2,koloP3,podkoloP3,koloP4,podkoloP4,koloP5,podkoloP5,koloP6,podkoloP6,koloP7,podkoloP7,koloP8,podkoloP8};
  upDownR[] = {koloL1,podkoloL1,koloL2,podkoloL2,koloL3,podkoloL3,koloL4,podkoloL4,koloL5,podkoloL5,koloL6,podkoloL6,koloL7,podkoloL7,koloL8,podkoloL8};

reversed

Boolean: Default true

Normally, models ARE reversed with respect to how they present on the screen after editing with tools like oxygen (eg) This overrides the default. See #model

reversed = false; // class thing

rotor...

String: Helicopters

 rotorBig =       "vrtule_velka";    //cobra
 rotorBigBlend =  "vrtule_velka_bl";
 rotorSmall =     "vrtule_mala";
 rotorSmallBlend= "vrtule_mala_bl";

S

...Sensitivity

Float: Default 1.0 Used by Plane Class

 aileronSensitivity = 0.33; // Cessna
 elevatorSensitivity = 0.1; // Cessna
 wheelSteeringSensitivity = 1.0; // default

...Simul/Plan

float: in meters

 steerAheadSimul = 0.5; //default
 steerAheadPlan = 0.35;//default
 steerAheadSimul = 0.2; // man
 steerAheadPlan = 0.2;

 predictTurnSimul = 1.2;//default
 predictTurnPlan = 1.2;//default
 predictTurnSimul = 3;// ship
 predictTurnPlan = 3;

scope

Integer: Default value = private.

scope = public;

Scope in concept is the same as the C++ reserved words of public, protected and private.

Defines normally exist at the top of a well written config.cpp to make meanings clearer.

#define private    0
#define protected  1
#define public     2

The meaning of each is as follows

private:

Only other classes inherit this class. It is not createVehicle'able, nor can the class be accessed via the Mission Editor.

private is a common method of grouping base characteristics together and inheriting all those common characteristics into a class that can be viewed or accessed.

public:

Any classes declared public are CamCreateabale, and selectable via the Editor.

protected:

Identical to public, except the class will not be listed in the mission editor. A very common form of use for this is

class vegetables
{
  scope=protected;
  VehicleClass="Fruit and Onions"; // a generic group in mission editor
  displayName="Generic Vegetable";
  namesound= whatever;
  icon= "vegetableIcon.paa";
 ///   put any other common characteristics in here
};
class GreenOnions : vegetables
{
   scope = public;
   displayName="Green Onion;
}
class PurpleOnion : vegetables
{
   ....

The effect here is to reduce (considerably) not only the amount of typing, but memory storage too.

It is only the public classes that are listed in the Mission Editor.

So in above example while each one of these has a separate displayName=, they are ALL 'grouped' in the Editor's "Fruit and Onions", and all of them will be referred to in the mission as "Generic Vegetable". If you follow along, you should fully expect to see another protected class called "Generic Fruit"

In the above example, it is just as useful to declare the base class 'private. But, see below, and see #accuracy

Protected classes are CamCreatable in the mission.sqm.

Protected classes are immensely useful to 'hide' obsolete models that are still required to maintain compatibility with older missions. Ie older missions will still be playable, but newly created ones will only 'get at' the newer improvements specified in a public class. This

class OriginalThing
{
  scope=protected;
  ....
  // lots of original things
  ....
};
class ImprovedThing : OriginalThing //<<<< inherits it all
{
  scope=public;
  ...
  // lots of new improved things
  ...
};

secondaryExplosion

Integer: Default disabled (-1)

 secondaryExplosion = -1;

sensitivity

Float: Default 1.0

 sensitivity = 0.6; //cars
 sensitivity = 2;//sniper

sensitivityEar

Float: Default 0.0075

 sensitivityEar = 0.13;//man

selection

   selection = L svetlo;

See #Reflectors Class, #ReloadAnimations Class (Arma Only), #Hatch... Class, #Indicator Class

selection...

ArmA String:

 selectionBackLights = "light_back";
 selectionBrakeLights = "light_brake";
 selectionFireAnim = "muzzleflash";
 selectionHRotorStill= "mainRotorStatic";
 selectionHRotorMove = "mainRotorBlurred";
 selectionVRotorStill = "tailRotorStatic";
 selectionVRotorMove = "tailRotorBlurred";
 selectionFabric = "latka";

shape

Float: This TokenName is used inside the #Light Class

   shape = "koulesvetlo";

See #Light Class, #Reflectors Class

showgunneroptics

ArmA Boolean:

 showgunneroptics = 0;

showWeaponCargo

Boolean:Default ?

 showWeaponCargo =true;

Found inside weapon holders (ammo boxes)

sound

String: Used by animated objects (campfire eg) to give sound effect. Or, simply by ambients(wolves)

 sound = "Fire";
 sound = Fountain;
 sound = OwlSfx;

SoundEnvironExt Class

  class SoundEnvironExt {

This is a Class used within the man class. Some/ None, or all sections of it can (of course) be over-ridden by inheritance.

The external class CfgManActions accesses the SoundEnvironExt class defined (or inherited) for any 'man' (soldier eg).

External class CfgManActions contains many clauses

 soundOverride=fallbody; // eg

for instances of when it wants sounds for that 'action' to take place.

thus, you can define none some or all arrays (within class with your SoundEnvironExt{}) for the following

  normalExt[] = 
  normal[] = 
  road[] =
  rock[] = 
  water[] =
  gravel[] = 
  sand[] = 
  drygrass[] = 
  grass[] = 
  forest[] = 
  mud[] = 
  wood[] = 
  metal[] = 
  snow[] = 
  hallway[] =
  fallbody[] = 
  laydown[] = 
  standup[] = 
  crawl[] =

Example

  snow[] = {
   { People\snow_L,0.000032,1 },
   { People\snow_R,0.000032,1 }};

snow is a Variable length Sound Array

see sounds[]

Sounds Various

Complex Array:

All the following use

nameOfSound[]= {"\AddonName\AnySound(.wss)",0.000000,1,1};

wss is the default. ogg can be specified.

...Sound

flySound[] = {"\AddonName\AnySound.wss",0.000000,1,1};
singSound[] = {"\AddonName\SoundFile.ogg",0.031623,1,1};
scudSound[] = {weapons\rocketflying,316.227783,0.200000};
scudSoundElevate[] = {vehicles\gun_elevate,0.010000,1};

sound...

 soundCrash[] = {"\AnyAddon\AnySound(.wss)",0.010000,1};

default values

 soundCrash[] = {Vehicles\crash,0.316228,1};
 soundDammage[] = {"",1,1};
 soundEngine[] = {"",1,1};
 soundEnviron[] = {"",1,1};
 soundLandCrash[] = {Explosions\intoground,0.316228,1};
 soundWaterCrash[] = {Explosions\intowater,0.316228,1};
 soundGetIn[] = {Vehicles\get_in,0.000316,1};
 soundGetOut[] = {Vehicles\get_out,0.000316,1};
 soundServo[] = {Vehicles\gun_elevate,0.010000,0.500000};
 soundGear[] = {"\AnyAddon\AnySound(.wss)",0.316228,1}; //no default'

 additionalSound[] = {\AnyAddon\AnySound(.wss),0.000000,1}; // man only

sound[]

used by animations

 sound[] = {"\anyPbo\AnySound(.wss)",10.000000,1};

side

Integer: Default Value: NEUTRAL.

The side, when declared, sets the 'vehicle' to east, west, resistance, civilian. The effect differs according to the 'vehicle' itself. Eg soldiers, versus hospitals or repair trucks that can only be used by same side, if specifically sided.

Well written missions (and configs) use defines at top of file to make this more legible.

#define NO_SIDE -1
#define EAST 0 // (Russian)
#define WEST 1 // (Nato)
#define RESISISTANCE 2 // Guerilla 
#define CIVILIAN 3
#define NEUTRAL 4
#define ENEMY 5
#define FRIENDLY 6
#define LOGIC 7

side = EAST;

NEUTRAL is the general case for all objects.

NO_SIDE is used for ambient seagulls and wolves (see #sound). It differs from NEUTRAL in that the engine spends no time looking for interraction with other objects.

simulation

String: Default value: invisible.

The engine behaviour with this #model.

 simulation = "SeaGull";
 simulation = "thing";
 simulation = "fire";
 simulation = "flag";
 simulation = "house";
 simulation = airplane,helicopter,tank // (eg)

Related TokenName: #model

size

Float: This TokenName is used inside the Smoke class and Reflector class

  size = 0.1;

part of Reflectors class

source

ArmA String: found in animationSources

   source = "reload";
   source = "time";

sourceAddress

ArmA String: found in animationSources

   sourceAddress = "loop";

sourceSize

Float: This TokenName is used inside the #Light Class

  sourceSize = 0.015;

...Speed

Float: In Kph.

 minSpeed = -0.5; //range 0->1
 maxSpeed = 80; //default
 maxSpeed = 30; //tractor
 maxSpeed = 60; //boat

scud...

String: Default ""

 scudLaunch = scudlunch.rtm;
 scudStart = scudstart.rtm;
 scudModel = scud_strela_proxy;
 scudModelFire = scud_strela_ohen;

straightDistance

ArmA INTEGER:

straightDistance = 50;

submerged..

Float: default 0.0

Almost all 'objects' are not submerged. This parameter is used to hide objects such as effects

 submerged = -0.5;// thing effect
 submergeSpeed = 0.25; // positive value makes it go deeper (sound goes quieter)

T

...Turn

Integers Degrees

  initTurn = 90;
  minTurn= -70;
  maxTurn = 70;

part of any Turret class (tanks eg)

see#gun

TokenNames Embedded

see #Embedded ClassNames

turning

ArmA Boolean: (i think)

turning = 1;

turnCoef

Float: Default 2.0

 turnCoef = 6.0; // truck
 turnCoef = 9.0; // tractor

terrainCoef

Float: Default 3.0

  terrainCoef = 6.0; //skoda

threat

float Array: Default Value {0.700000,0.500000,0.300000};

How threatening you are to unit types {Soft, Armor, Air}, respectively.

The ai for this model selects targets of opportunity, based on these values.

 threat[] = {1,0.0500000,0.050000}; // soldier
 threat[] = {1,0.900000,0.100000}; // law soldier
 threat[] = {0.900000,0.700000,0.300000};// bmp

Related TokenNames: type , #cost , #threat

timeToLive

Float: Default 10,000,000,000.0; // seconds?

 timeToLive = 20;// thing effects (bullets)
 timeToLive = 100000002004087730000.0;// campfire

transport...

transportAmmo

Integer: Used by supply 'vehicles' to determine total amount avaialable for entire mission. Once depleted...

A 'vehicle' in this case can be a genuine repair truck, or, a building.

  transportAmmo = 300000;  // reammo truck
  transportAmmo = 10000000;// bigship

  transportFuel = 3000;        //refueltruck
  transportRepair = 200000000; //repairtruck

transportMax...

Integer: default 0

 transportMaxMagazines = 50; //car
 transportMaxWeapons = 10;
 transportMaxMagazines = 5; // motorcyle
 transportMaxWeapons = 0;
 transportMaxMagazines = 50; // tank
 transportMaxWeapons = 10;
 transportMaxMagazines = 20; //air
 transportMaxWeapons = 3;
 transportMaxMagazines = 100; // boat
 transportMaxWeapons = 20;
 transportMaxMagazines = 500; //ship
 transportMaxWeapons = 200;
 transportMaxMagazines = 200; // truck
 transportMaxWeapons = 50;
 transportMaxMagazines = 100; // apc
 transportMaxWeapons = 20;
 transportMaxMagazines = 200; // helicpter
 transportMaxWeapons = 50;
 transportMaxWeapons = 500; // ammo boxes
 transportMaxMagazines = 2000;

Values vary depending on exact tupe of 'boat' eg.

These TokenNames ate used to indicate how many units of each type an object can hold. Most objects can't hold anything.

transportSoldier

Integer: Default Value= 0.

Number of 'passengers' this vehicle can carry. The value does not include the driver, nor any vehicle positions such as gunner (if any) or commander(if any). See the JeepMg below for a 3 person vehicle which can only transport ONE soldier.

 transportSoldier = 3;     //jeep/car
 transportSoldier = 50;    //large ship
 transportSoldier = 6to10; //SmallShip 
 transportSoldier = 3;     //a10
 transportSoldier = 8to12; //helicopters
 transportSoldier = 2or3;  //ambulance
 transportSoldier = 8;     //apc/bmp
 transportSoldier = 12;    //truck
 transportSoldier = 1;     //jeepmg
 transportSoldier = 1or2;  //repair type truck

to make the game 'interesting', similar vehicles on different sides, can carry non equivalent numbers.

transportVehiclesCount

Integer : default 0

transportVehiclesCount = 15; // a Carrier (big ship)

TransportMagazines Class

transportVehiclesMass

Integer: Default 0

  transportVehiclesMass = 0; // not used by any model

TransportWeapons Class

turretAxis

turretAxis = OsaVeze;

see #Turret Class

type (threat)

Integer: Default Value: Armored

This indicates the threat type of the 'vehicle'.

In well written configs, the 3 possible values are declared as defines at top of file for legibility

#define VSoft 0
#define VArmor 1
#define VAir 2

 type = VAir;

Vehicles (and buildings) are armoured, humans are 'soft' and aircraft (obviously) are air

Related TokenNames: type , #cost , #threat

type (animation)

old Unknown: Default Value: rotation

This appears in the ReloadAnimations class

  type = rotation;

typicalCargo

Variable String Array:Preloads vehicle with units (if auto)

This array can have zero or more strings.

 typicalCargo[] = {"Soldier","Soldier","SoldierLAW","SoldierLAW"};

Note that these are ClassNames of soldiers.

U

...UsesPilotView

Bool: : Default false

gunnerUsesPilotView = false; // some choppers (mi17)
commanderUsesPilotView=true;

unitInfoType

String

 unitInfoType = "UnitInfoSoldier";

Certain 'vehicles' hide this information.

see #hideUnitInfo

unloadInCombat

bool: default true

unloadInCombat =false;

All true vehicles will cause ai to disembark when in combat.

upDownL/R

wheels class see #rotL/R

V

vehicleClass

String: Default Value= "Objects"

Used for Mission Editor basic category selection

 vehicleClass = "Air";
 vehicleClass = "Support";
 vehicleClass = "My Great Addon";

vehicleClass[]

String Array:

vehicleClass[] = {Men,Car,Armored,Air,Support,Camera,Objects,Ammo,Sounds,Mines};

view...Shadow

ArmA Boolean:

  viewCargoShadow = true;
  viewGunnerShadow = true;

viewGunnerInExternal

Boolean: default false

   viewGunnerInExternal = true; // for some turrets and M113

W

weapon