Dynamic Object Compositions – Arma 2

From Bohemia Interactive Community
Jump to navigation Jump to search
m (Improved formatting.)
m (Some wiki formatting)
 
(19 intermediate revisions by 7 users not shown)
Line 1: Line 1:
[[Category:ArmA_2:_Editor_Modules]]
{{TOC|side}}
 
'''Note: this page is a work-in-progress! More info to follow as soon as possible.'''
 
== Introduction ==
 
The Dynamic Object module (DynO) was made to make spawning entire sets / templates of objects much easier (e.g. an entire base). It is possible to spawn specific sets of objects or ask a library for a random set matching a list of tags. The system is flexible so that anyone may ''grab'' new sets, register them and all systems using the DynO sets will spawn the new sets as well.
The Dynamic Object module (DynO) was made to make spawning entire sets / templates of objects much easier (e.g. an entire base). It is possible to spawn specific sets of objects or ask a library for a random set matching a list of tags. The system is flexible so that anyone may ''grab'' new sets, register them and all systems using the DynO sets will spawn the new sets as well.


== How to add BIS compositions ==
To add one of the BIS premade compositions simply create a gamelogic and the code below into the init field <pre>_newComp = [(getPos this), (getDir this), "FuelDump1_US"] call (compile (preprocessFileLineNumbers "ca\modules\dyno\data\scripts\objectMapper.sqf"));</pre>
Where ''"FuelDump1_US"'' is the composition name you want to spawn (check composition library for names of BIS compositions).
You can also spawn compositions by searching the library for matching tags, for example: <pre>_newComp = [(getPos this), random 360, ["usmc", "medium"]] call (compile (preprocessFileLineNumbers "ca\modules\dyno\data\scripts\objectMapper.sqf"));</pre>
Where ''"usmc"'' & ''"medium"'' are the tags used.


== Creating custom compositions ==
{{Feature|informative|This page was written for {{arma2}}.}}


How to create a custom composition:


1) Download the objectGrabber & objectMapper scripts: [http://www.filefront.com/15846565/custom_compositions.rar]
== How to add BI compositions ==


2) Open the editor (2d) using the map "Render Island" or another island with some flat space.
To add one of the BIS premade compositions simply create a gamelogic and the code below into the init field:
<sqf>_newComp = [getPos this, getDir this, "FuelDump1_US"] call compile preprocessFileLineNumbers "ca\modules\dyno\data\scripts\objectMapper.sqf";</sqf>


3) Create & save a mission. Then put the objectGrabber.sqf script into the mission folder.
Where ''"FuelDump1_US"'' is the composition name you want to spawn (check composition library for names of BIS compositions).
You can also spawn compositions by searching the library for matching tags, for example:
<sqf>_newComp = [getPos this, random 360, ["usmc", "medium"]] call compile preprocessFileLineNumbers "ca\modules\dyno\data\scripts\objectMapper.sqf";</sqf>
Where ''"usmc"'' and ''"medium"'' are the tags used.


4) Place your objects on the map.


5) If you want a custom object init you have to use this format in the initialization field of the object otherwise it wont be
== Creating Custom Compositions ==
grabbed: this setvariable ["VehicleInit","<YOUR INITSTRING>;"]


6) Place the player unit in the middle of your composition and put this in its init:
How to create a custom composition:
<pre>null = [getpos this,200] execvm "objectGrabber.sqf"; // (200 is the radius, adjust when needed).</pre>


7) Preview the mission, the objects are now written in arma2.rpt
Download the customized (from {{Link|link= http://forums.bistudio.com/showthread.php?130462-How-do-I-precisely-place-local-objects-consistently&p=2096215&viewfull=1#post2096215|text= this post}}) objectGrabber & objectMapper scripts: {{Link|http://www.mediafire.com/?ilgwjijl4gxpg8c|link}}
# Open the editor (2d) using the map "Render Island" or another island with some flat space.
# Create & save a mission. Then put the objectGrabber.sqf script into the mission folder.
# Place your objects on the map.
# If you want a custom object init you have to use this format in the initialization field of the object otherwise it won't be grabbed: <sqf>
this setvariable ["VehicleInit","<YOUR INITSTRING>;"]
</sqf>
# Place the player unit in the middle of your composition and put this in its init: <sqf>null = [getPos this, 200] execVM "objectGrabber.sqf"; // (200 is the radius, adjust when needed).</sqf>
# Preview the mission, the objects are now written in arma2.rpt
# Copy all text between "startgrabbing" and "endgrabbing" (not the ### lines) and paste this in the file {{hl|composition_template.sqf}} at the marked area.
# Remove the comma at the last line of the copied text. Example arma2.rpt:<sqf>
["MASH",[0,0,0],0,1,0],
["Land_GuardShed",[35.9503,29.7019,0],0,1,0,{}],
["ACamp",[-41.3973,-33.6524,0],0,1,0,{}], // here
</sqf>After editing:<sqf>
["MASH",[0,0,0],0,1,0],
["Land_GuardShed",[35.9503,29.7019,0],0,1,0,{}],
["ACamp",[-41.3973,-33.6524,0],0,1,0,{}]
</sqf><br>It should now look like the example in the scripts
# Then save the file as "yourCompositionName.sqf"


8) Copy all text between "startgrabbing" and "endgrabbing" (not the ### lines) and paste this in the file composition_template.sqf
{{Feature|important|
at the marked area.
The above process is not working in {{arma3}}.
See {{Link|link= http://forums.bistudio.com/showthread.php?173396-Dynamic-Object-Compositions-(DoC)&p=2641626&viewfull=1#post2641626|text= this thread}} for information about a compatible one.
}}


9) Remove , at the last line of the copied text.
      Example arma2.rpt:
      ["MASH",[0,0,0],0,1,0],
      ["Land_GuardShed",[35.9503,29.7019,0],0,1,0],
      ["ACamp",[-41.3973,-33.6524,0],0,1,0]''','''


      After editing:
== Spawning Custom Compositions ==
      ["MASH",[0,0,0],0,1,0],
      ["Land_GuardShed",[35.9503,29.7019,0],0,1,0],
      ["ACamp",[-41.3973,-33.6524,0],0,1,0]
 
It should now look like the example in with the scripts
 
10) Then save the file as "yourCompositionName.sqf"
 
== Spawning custom compositions ==


To place your custom composition in your mission
To place your custom composition in your mission


1) Place the objectMapper.sqf file into your mission directory.
# Place the {{hl|objectMapper.sqf}} file into your mission directory.
# Create a folder called 'compositions' in your mission directory and place the composition there.
# Place a game logic on the map and put this in the init: <sqf>null = ["test_comp", getDir this, getPos this] execVM "objectMapper.sqf"; // (replace "test_comp" with your own compositioname without '.sqf')</sqf>
# Preview the mission and your composition is placed (you can place multiple and different compositions at once).


2) Create a folder called 'compositions' in your mission directory and place the composition there.


3) Place a game logic on the map and put this in the init: null = ["test_comp", getDir this, getPos this] execVM "objectMapper.sqf (replace "test_comp" with your own compositioname without '.sqf')
{{Feature|important|
The above process is not working in {{arma3}}.
See {{Link|link= http://forums.bistudio.com/showthread.php?173396-Dynamic-Object-Compositions-(DoC)&p=2641626&viewfull=1#post2641626|text= this thread}} for information about a compatible one.
}}


4) Preview the mission and your composition is placed (you can place multiple and different compositions at once).


== Composition library ==
== Composition library ==


List of all compositions with pictures:
{{Link|link= http://forums.bistudio.com/showthread.php?s=7a61764b758d515d2d989266e9e80ec3&p=1673511#post1673511|text= Rok's script to put all on map}}
http://www.armatechsquad.com/ArmA2Class/A2/Objects/compositions/


{{Important|NOTE: While the list above is useful, some of the composition classnames are incorrect in the pictures.}}
{{Feature|important|While the list above is useful, some of the composition classnames are incorrect in the pictures.}}


===List of classnames===
=== {{arma2}} Classnames ===


{{Columns|5|
* SmallBase
* SmallBase
* CityBase01
* CityBase01
Line 154: Line 154:
* FiringRange_Water1
* FiringRange_Water1
* FiringRange_Water2
* FiringRange_Water2
}}
=== {{arma2oa}} Classnames ===
{{Columns|5|
* SmallBase_EP1
* CityBase01_EP1
* CityBase02_EP1
* CityBase04_EP1
* BunkerMedium01_EP1
* BunkerMedium02_EP1
* BunkerMedium03_EP1
* BunkerMedium04_EP1
* BunkerMedium05_EP1
* BunkerMedium06_EP1
* BunkerMedium07_EP1
* BunkerMedium08_EP1
* BunkerMedium09_EP1
* BunkerMedium10_EP1
* GuardPost_US_EP1
* GuardPost2_US_EP1
* GuardPost3_US_EP1
* GuardPost4_US_EP1
* GuardPost5_US_EP1
* GuardPost6_US_EP1
* GuardPost7_US_EP1
* GuardPost8_US_EP1
* SmallNest_US_EP1
* VehicleShelter_US_EP1
* FuelDepot_US_EP1
* CheckPoint1_US_EP1
* AntiAir1_US_EP1
* Firebase1_US_EP1
* FuelDump1_US_EP1
* RadarSite1_US_EP1
* VehicleParking1_US_EP1
* HeliParking1_US_EP1
* AirplaneParking1_US_EP1
* WeaponsStore1_US_EP1
* Camp1_US_EP1
* Camp2_US_EP1
* Camp3_US_EP1
* MediumTentCamp_TK_EP1
* MediumTentCamp2_TK_EP1
* MediumTentCamp3_TK_EP1
* AntiAir1_TK_EP1
* Firebase1_TK_EP1
* FuelDump1_TK_EP1
* RadarSite1_TK_EP1
* VehicleParking1_TK_EP1
* HeliParking1_TK_EP1
* AirplaneParking1_TK_EP1
* WeaponsStore1_TK_EP1
* Camp1_TK_EP1
* Camp2_TK_EP1
* GuardPost_CZ_EP1
* VehicleShelter_CZ_EP1
* TankDitch_CZ_EP1
* TankDitch2_CZ_EP1
* CityBase03_CZ_EP1
* BunkerSmall01_CZ_EP1
* MediumTentCamp_GUE_EP1
* SmallTentCamp_GUE_EP1
* SmallTentCamp2_GUE_EP1
* Camp1_TKM_EP1
* Camp2_TKM_EP1
* MPA_infoKiosk1
* MPA_infoKiosk2
* MPA_infoKiosk3
}}
{{GameCategory|arma2|Editor Modules}}

Latest revision as of 22:41, 29 March 2024

The Dynamic Object module (DynO) was made to make spawning entire sets / templates of objects much easier (e.g. an entire base). It is possible to spawn specific sets of objects or ask a library for a random set matching a list of tags. The system is flexible so that anyone may grab new sets, register them and all systems using the DynO sets will spawn the new sets as well.


ⓘ
This page was written for Arma 2.


How to add BI compositions

To add one of the BIS premade compositions simply create a gamelogic and the code below into the init field:

_newComp = [getPos this, getDir this, "FuelDump1_US"] call compile preprocessFileLineNumbers "ca\modules\dyno\data\scripts\objectMapper.sqf";

Where "FuelDump1_US" is the composition name you want to spawn (check composition library for names of BIS compositions). You can also spawn compositions by searching the library for matching tags, for example:

_newComp = [getPos this, random 360, ["usmc", "medium"]] call compile preprocessFileLineNumbers "ca\modules\dyno\data\scripts\objectMapper.sqf";

Where "usmc" and "medium" are the tags used.


Creating Custom Compositions

How to create a custom composition:

Download the customized (from this post) objectGrabber & objectMapper scripts: link

  1. Open the editor (2d) using the map "Render Island" or another island with some flat space.
  2. Create & save a mission. Then put the objectGrabber.sqf script into the mission folder.
  3. Place your objects on the map.
  4. If you want a custom object init you have to use this format in the initialization field of the object otherwise it won't be grabbed:
    this setvariable ["VehicleInit","<YOUR INITSTRING>;"]
  5. Place the player unit in the middle of your composition and put this in its init:
    null = [getPos this, 200] execVM "objectGrabber.sqf"; // (200 is the radius, adjust when needed).
  6. Preview the mission, the objects are now written in arma2.rpt
  7. Copy all text between "startgrabbing" and "endgrabbing" (not the ### lines) and paste this in the file composition_template.sqf at the marked area.
  8. Remove the comma at the last line of the copied text. Example arma2.rpt:
    ["MASH",[0,0,0],0,1,0], ["Land_GuardShed",[35.9503,29.7019,0],0,1,0,{}], ["ACamp",[-41.3973,-33.6524,0],0,1,0,{}], // here
    After editing:
    ["MASH",[0,0,0],0,1,0], ["Land_GuardShed",[35.9503,29.7019,0],0,1,0,{}], ["ACamp",[-41.3973,-33.6524,0],0,1,0,{}]

    It should now look like the example in the scripts
  9. Then save the file as "yourCompositionName.sqf"
⚠
The above process is not working in Arma 3. See this thread for information about a compatible one.


Spawning Custom Compositions

To place your custom composition in your mission

  1. Place the objectMapper.sqf file into your mission directory.
  2. Create a folder called 'compositions' in your mission directory and place the composition there.
  3. Place a game logic on the map and put this in the init:
    null = ["test_comp", getDir this, getPos this] execVM "objectMapper.sqf"; // (replace "test_comp" with your own compositioname without '.sqf')
  4. Preview the mission and your composition is placed (you can place multiple and different compositions at once).


⚠
The above process is not working in Arma 3. See this thread for information about a compatible one.


Composition library

Rok's script to put all on map

⚠
While the list above is useful, some of the composition classnames are incorrect in the pictures.

Arma 2 Classnames

  • SmallBase
  • CityBase01
  • CityBase02
  • CityBase04
  • BunkerMedium01
  • BunkerMedium02
  • BunkerMedium03
  • BunkerMedium04
  • BunkerMedium05
  • BunkerMedium06
  • BunkerMedium07
  • BunkerMedium08
  • BunkerMedium09
  • BunkerMedium10
  • GuardPost_US
  • GuardPost2_US
  • GuardPost3_US
  • GuardPost4_US
  • GuardPost5_US
  • GuardPost6_US
  • GuardPost7_US
  • GuardPost8_US
  • SmallNest_US
  • VehicleShelter_US
  • FuelDepot_US
  • CheckPoint1_US
  • AntiAir1_US
  • Firebase1_US
  • FuelDump1_US
  • RadarSite1_US
  • VehicleParking1_US
  • HeliParking1_US
  • AirplaneParking1_US
  • WeaponsStore1_US
  • Camp1_US
  • Camp2_US
  • Camp3_US
  • MediumTentCamp_RU
  • MediumTentCamp2_RU
  • MediumTentCamp3_RU
  • AntiAir1_RU
  • Firebase1_RU
  • FuelDump1_RU
  • RadarSite1_RU
  • VehicleParking1_RU
  • HeliParking1_RU
  • AirplaneParking1_RU
  • WeaponsStore1_RU
  • Camp1_RU
  • Camp2_RU
  • GuardPost_CDF
  • VehicleShelter_CDF
  • TankDitch_CDF
  • TankDitch2_CDF
  • CityBase03
  • BunkerSmall01
  • MediumTentCamp_napa
  • SmallTentCamp_napa
  • SmallTentCamp2_napa
  • Camp1_INS
  • Camp2_INS
  • FiringRange1
  • FiringRange2
  • FiringRange3
  • FiringRange4
  • FiringRange5
  • FiringRange6
  • FiringRange7
  • FiringRange8
  • FiringRange9
  • FiringRange10
  • FiringRange11
  • FiringRange_Wreck1
  • FiringRange_Wreck2
  • FiringRange_Wreck3
  • FiringRange_Wreck4
  • FiringRange_Wreck5
  • FiringRange_Wreck6
  • FiringRange_Wreck7
  • FiringRange_Water1
  • FiringRange_Water2

Arma 2: Operation Arrowhead Classnames

  • SmallBase_EP1
  • CityBase01_EP1
  • CityBase02_EP1
  • CityBase04_EP1
  • BunkerMedium01_EP1
  • BunkerMedium02_EP1
  • BunkerMedium03_EP1
  • BunkerMedium04_EP1
  • BunkerMedium05_EP1
  • BunkerMedium06_EP1
  • BunkerMedium07_EP1
  • BunkerMedium08_EP1
  • BunkerMedium09_EP1
  • BunkerMedium10_EP1
  • GuardPost_US_EP1
  • GuardPost2_US_EP1
  • GuardPost3_US_EP1
  • GuardPost4_US_EP1
  • GuardPost5_US_EP1
  • GuardPost6_US_EP1
  • GuardPost7_US_EP1
  • GuardPost8_US_EP1
  • SmallNest_US_EP1
  • VehicleShelter_US_EP1
  • FuelDepot_US_EP1
  • CheckPoint1_US_EP1
  • AntiAir1_US_EP1
  • Firebase1_US_EP1
  • FuelDump1_US_EP1
  • RadarSite1_US_EP1
  • VehicleParking1_US_EP1
  • HeliParking1_US_EP1
  • AirplaneParking1_US_EP1
  • WeaponsStore1_US_EP1
  • Camp1_US_EP1
  • Camp2_US_EP1
  • Camp3_US_EP1
  • MediumTentCamp_TK_EP1
  • MediumTentCamp2_TK_EP1
  • MediumTentCamp3_TK_EP1
  • AntiAir1_TK_EP1
  • Firebase1_TK_EP1
  • FuelDump1_TK_EP1
  • RadarSite1_TK_EP1
  • VehicleParking1_TK_EP1
  • HeliParking1_TK_EP1
  • AirplaneParking1_TK_EP1
  • WeaponsStore1_TK_EP1
  • Camp1_TK_EP1
  • Camp2_TK_EP1
  • GuardPost_CZ_EP1
  • VehicleShelter_CZ_EP1
  • TankDitch_CZ_EP1
  • TankDitch2_CZ_EP1
  • CityBase03_CZ_EP1
  • BunkerSmall01_CZ_EP1
  • MediumTentCamp_GUE_EP1
  • SmallTentCamp_GUE_EP1
  • SmallTentCamp2_GUE_EP1
  • Camp1_TKM_EP1
  • Camp2_TKM_EP1
  • MPA_infoKiosk1
  • MPA_infoKiosk2
  • MPA_infoKiosk3
Retrieved from "https://community.bistudio.com/wiki?title=Arma_2:_Dynamic_Object_Compositions&oldid=363428"