BIS_fnc_findSafePos
Jump to navigation
Jump to search
Description
- Description:
- This function generates position on a map according to several given parameters (see diagram).
The position pos will be generated inside an area which resides between minDist and maxDist from the given center. If objDist is also specified, the position will be selected objDist away from nearest terrain object. If maxGrad > 0 then the position will be also checked for how flat the area around is within objDist radius. The function can additionally be instructed to generate position specifically on water or land (waterMode) or on a shoreline (shoreMode). The shoreLine param will be ignored if position is not requested specifically on land.
Additionally, generated position could be checked against the list of blacklisted positions blacklistPos. If search for suitable position failed, defaultPos position will be used. The format for defaultPos is array with 2 positions: [posOnLand, posOnWater].
- Execution:
- call
- Groups:
- Positions
Syntax
- Syntax:
- [center, minDist, maxDist, objDist, waterMode, maxGrad, shoreMode, blacklistPos, defaultPos] call BIS_fnc_findSafePos
- Parameters:
- center: (Optional, default []) center position. Can be one of:
- Array - position in format Position2D or Position3D
- Object - object which position will be used
- Nothing - when passing empty array [] or nothing, the world's "safePositionAnchor" entry will be used
- minDist: Number - (Optional, default 0) minimum distance from the center position
- maxDist: Number - (Optional, default -1) maximum distance from the center position. If -1, the world's "safePositionRadius" entry will be used
- objDist: Number - (Optional, default 0) minimum distance from the resulting position to the center of nearest object. Specifying quite large distance here will slow the function and might often fail to find suitable position. Recommended value: 0..10
- waterMode: Number - (Optional, default 0) water mode. Can be one of:
- 0 - cannot be in water
- 1 - can either be in water or not
- 2 - must be in water
- maxGrad: Number - (Optional, default 0) maximum terrain gradient (hill steepness). A quite small non-zero value could result in failure to find suitable position. Recommended: 0.1+
- shoreMode: Number - (Optional, default 0) shore mode. Can be one of:
- 0 - does not have to be at a shore
- 1 - must be at a shore
- blacklistPos: Array - (Optional, default []) list of blacklisted areas in format [area1, area2, area3... areaN]. Can be one of:
- defaultPos: Array - (Optional, default []) default position when no position is found. Array format is [landPosition, seaPosition], where:
- Return Value:
- Array - in format [x,y] on success. When position cannot be found at all, default map center position is returned, which will be in format [x,y,0]
Examples
- Example 1:
- Find position minimum 1m from from player but not further than 150m, not closer than 3m to any other object, not in the water, maximum gradient of 20, not on the shoreline:
- Example 2:
- Example 3:
Additional Information
- See also:
- BIS_fnc_randomPosTrigger BIS_fnc_randomPos
Notes
-
Report bugs on the Feedback Tracker and/or discuss them on the Arma Discord or on the Forums.
Only post proven facts here! Add Note
- Posted on Mar 15, 2017 - 19:30 (UTC)
- To make sure position is not inside a building, increase distance to nearest object param.
- Posted on Sep 24, 2021 - 22:23 (UTC)
- If objDist > 0, this function will unfortunately treat all roads and trails seen on the map as obstacles to avoid, due to its unfiltered usage of nearestTerrainObjects.