Performance Profiling

Versions with performance profiling

The Profiling build is provided in semi regular intervals between major game version updates by Dedmen in tandem with Arma 3 Performance build.

The download and changelog can be found in the BI Forums as well as in the #perf_prof_branch channel in the official Arma 3 Discord server.

⚠

• Through the nature of a Profiling build (due to additional "measuring"/profiling code), they are not as performant as the normal release builds!
• Performance Profiling works also with the Diagnostics Exe.

How to set up

⚠

• To use the profiling build, you must launch the game with the arma3profiling_x64.exe (arma3serverprofiling_x64.exe for the server).
• One way is to delete the arma3_x64.exe, and rename the profiling exe to it. This way you can continue to use the Arma 3 launcher to launch the game with your startup parameters (or other third party launcher applications).
• The alternative is to use batch files (and copy your startup parameters from the top of a rpt log file from a regular session).

Steam branch

AUTOMATIC (Recommended) - see also Steam Branches.

1. Open Steam
2. Right click on Arma 3 in your Steam Library, then Properties
3. Select the tab betas
4. Finally, use the dropdown list to select the branch profiling - Performance Profiling Build
5. Wait for the download to finish

This will automatically download newest performance and profiling exes once they are available.

Google Drive

MANUAL (only when needed)

1. Download and install 7z (usually the 64-bit Windows x64 variant)
2. Open BI forum thread
3. Got to latest post with a link to google drive
4. Browse to the latest game version and profiling build version folder
5. Download the desired exe from the google drive folder (usually the arma3client_x64_profiling_XXX.7z)
6. Extract the 7z file and copy the exe to your game folder (usually C:\Program Files (x86)\Steam\steamapps\common\Arma 3)

diag_captureFrame sample output

diag_captureFrame sample output

diag_captureFrame sample output

FPS basics

The duration the engine needs to compute all calculations in one cycle is called a frame. The frame-rate, or frames-per-second (fps), in return states how many cycles the engine could compute per second.

⚠

The shorter a cycle/frame, the higher the fps.

ⓘ

Note: One second consists of one thousand milliseconds. 1 s = 1000 ms

FPS to frame duration table

FPS	seconds	milliseconds
100	0.010	10
60	0.017	17
50	0.020	20
40	0.025	25
30	0.033	33
20	0.050	50
10	0.100	100
5	0.200	200
4	0.250	250
3	0.333	333
2	0.500	500
1	1.0	1000

Duration parameter

• The duration parameter is a time measured in seconds. 0.3 (seconds) is the same as 300 ms / milliseconds.
• It is used to determine what duration of a frame you consider abnormal or that you are interested in for other reasons.
• The first time such frame happens, the frame information will be captured - or put differently: when a situation occurs with a frame lasting longer than said duration.
• 0.3 (<3 fps for the whole frame) is definitely something you should not see in a normal game.
• If you do not capture any frames with 0.3, try lowering it to 0.2 (200 ms / <5 fps) or 0.1 (100 ms / <10 fps).
• If it triggers "too early" before the main slowdown happens that you want to analyze, increase it to a higher value, e.g. 1.0 for long freeze (<1 fps).

Scope parameter

• total is name for the scope of the duration for the whole frame (sLoop on a dedicated server).
• With the total scope you capture more or less your frames per second (fps) - if your current frame-rate is essentially stable. In other words if all frames for that second have roughly similar duration.
• In some situations you may encounter single/few frame lasting mini-freezes - aka one/few frames take rather long to complete (ie 100 ms), yet the rest remains in your normal fps range (20 ms for 50 fps for example).
• Whereas a longer freeze means usually a frame last very long, like a second or longer. Thus the game stalls altogether for the given timeframe.
• The scope parameter now allows you to capture subparts of a frame, of different parts of the engine computation - in general terms like networking, world and unit simulation, AI behavior, sound, rendering and visibility checks.
• The total scope is also the mainframe - all things the engine has to complete in a cycle. In addition there are other threads, where the engine moves other tasks to be computed alongside. Essentially this is what multi-threading is about, allowing the CPU with multiple cores to compute more things at the same time, and thus to reduce the duration of the main frame.
• With the scope parameter you can said subparts from the mainframe, yet also from the so called "worker" threads.
• The names for scopes/subscopes you can get from the capture frame UI or in the frame capture logging files (.log/.trace).

How to capture

Client

Current Frame

If you want to capture a snapshot of a current moment, there are a few options:

1. Via Arma 3 Cheats

1. Press left shift + numblock minus together
2. Type frame
3. As result the diag capture dialog opens

⚠

• This is a very rough way to capture the game is running while you are typing.
• Outside multiplier, if you open the pause menu, the simulation for the mission is halted. So when you do a capture in that menu, you only get a capture for the menu simulation.
• You can use the frame cheat at any point - ie in the main menu or submenus, in the editor, in multiplayer, etc.

2. Via Debug Console

1. Open the console (ESC key to open pause menu or left ctrl + D in the)
2. Execute [[diag_captureFrame|diag_captureFrame 1]]
3. As result the diag capture dialog opens

⚠

• This is a very rough way to capture the game is running while you are typing.
• Outside multiplier, if you open the pause menu, the simulation for the mission is halted. So when you do a capture in that menu, you only get a capture for the menu simulation.
• To avoid that, you need to delay the execution until the pause menu is closed again. For example by: //TODO
• To have the console available in a mission (outside the), you need to enable it via the description.ext enableDebugConsole parameter.
• Alternatively you can enable the console in any missions via mods (see below).

Mods to enable console in any mission:

• Enable Debug Console = 1 (Access - ADMIN) by Mr. Uplay
• Enable Debug Console = 2 (Access - ALL) by Mr. Uplay
• enableDebugConsole by Sams
• Debug Console by R3vo

{{Feature|important| For dedicated server use, you need to allow the given mod by uploading the respective bikey to the server's keys folder - or disable -No content provided- via [[Arma_3:_Server_Config_File|server.cfg]. }}

Strongly recommended: Enhanced debug console via CBA_A3 or DevCon mod

3. Via mission specific code

1. Functions
2. On Activation by Triggers
3. Object init field

Slow Frame

If you want to capture a snapshot of a slow frame, there are a few options:

1. Via Arma 3 Cheats

1. Press left shift and numblock minus together
2. Type sframe
3. Once the game falls below 30 fps (30 ms / 0.030 (s) duration for for total scope) the diag capture dialog opens

⚠

• This is a very basic way to capture slow frames as the limit is not customizable and only works on the total scope. For customizable scope and duration use the options below.
• Outside multiplier, if you open the pause menu, the simulation for the mission is halted. So when you do a capture in that menu, you only get a capture for the menu simulation.
• You can use the sframe cheat at any point - ie in the main menu or submenus, in the editor, in multiplayer, etc.

2. Via Debug Console

1. Open the console (ESC key to open pause menu or left ctrl + D in the)
2. Execute diag_captureSlowFrame ["total", 0.03];// [scope, duration]
3. As result the diag capture dialog opens

⚠

• Outside multiplier, if you open the pause menu, the simulation for the mission is halted. So when capture triggers while you are still in that menu, you only get a capture for the menu simulation.
• To avoid that, you need to delay the execution until the pause menu is closed again. For example by: //TODO
• To have the console available in a mission (outside the), you need to enable it via the description.ext enableDebugConsole parameter.
• Alternatively you can enable the console in any missions via mods (see above).

3. Via mission specific code

1. Functions
2. On Activation by Triggers
3. Object init field

Storing a capture to file

To export the gathered information for sharing with others

TODO

Diag capture dialog

1. Select Main Thread (if not selected yet)
2. Press the Copy button
3. Open an external text editor
4. Paste the text into a new text/log file
5. Save the file

TODO

diag_captureSlowFrame

TODO

Dedicated server

TODO

How to view a capture

TODO

Ingame

1. In the window you will be able to browse a lot of performance-related data, which can be interesting

TODO

Externally

TODO

Scripting Commands

• diag_captureFrame
• diag_captureSlowFrame
• diag_logSlowFrame - not available in Arma 3. Since 2.20 diag_captureSlowFrame with toFile parameter can log to file as alternative.
• diag_captureFrameToFile

diag_captureFrame sample output with custom subtree

Creating Your Own Subtree

When Profiling Per-Frame Eventhandlers (PFH), diag_captureFrame only shows one blob called siFEH that contains all PFH's so you can't see what part of that is caused by your PFH.
You can create your own subtree inside siFEH by wrapping your function call inside a isNil CODE statement like this:
Turn your old call which may look like this:

addMissionEventHandler ["EachFrame", { call myPFHFunction }];

Into something like this:

addMissionEventHandler ["EachFrame", { isNil { call myPFHFunction } // isNil creates the subtree }];

Now when you run diag_captureFrame inside of siPFH you will have a subtree called gsEva and behind that you can see the first line of code inside the isNil statement.
It will only show a part of the first line of that code so you should put something descriptive into the isNil statement.
You can use the same to create a subtree for any function you like. This will also work inside Scheduled (spawned) scripts.
But using this method to "subtree" a function with return values requires a little bit of trickery to get the return value out.

See Also

• Code Optimisation
• Mission Optimisation