Server Config File – Arma 3

Latest revision as of 07:40, 10 December 2024

Arma 3 Server Configuration Overview
Setup	Arma 3: Dedicated Server
Files	Arma 3: Server Config File ● Arma 3: Basic Server Config File ● Arma 3: Server Profile
Other	Multiplayer Server Commands ● Arma 3: Mission voting ● Arma 3: Headless Client ● BattlEye

This page is about Arma 3 server configuration. For previous titles, see Arma 2: Server Config File.

This article deals with the server.cfg, a configuration file which one can use to configure various game server settings such as the difficulty level, how many votes are needed, and welcome messages. The name server.cfg means nothing, and this file can be called anything. The real name is determined by the -config command line option when launching the dedicated server. There is no default name: when no filename is specified, no server configuration file is loaded.

Server Options

Parameter	Default	Description	Since
`passwordAdmin = "xyzxyz";`	`""`	Password to protect admin access.	N/A
`password = "xyz";`	`""`	Password required to connect to server.	N/A
`serverCommandPassword = "xyzxyz";`	`""`	Password required by alternate syntax of serverCommand server-side scripting (Case-Sensitive).	N/A
`hostname = "My Server";`	unknown	Servername visible in the game browser.	N/A
`maxPlayers = 10;`	`64` (DS)	The maximum number of players that can connect to server. The final number will be lesser between number given here and number of mission slots.	N/A
`motd[] = { "Welcome to my server.", "Hosted in the net." };`	`{}`	Two lines welcome message. Comma is the 'new line' separator.	N/A
`admins[] = { "<UID>" };`	`{}`	Whitelisted clients can use `#login` without password. See Logged In Admin.	1.70
`headlessClients[] = { "<IP>" };`	`{}`	Headless Client IPs. Multiple connections and addresses are allowed in case of multiple Headless Clients. See Arma 3: Headless Client.	N/A
`localClient[] = { "<IP>" };`	`{}`	Indicates clients with unlimited bandwidth and nearly no latency. See Arma 3: Headless Client.	N/A
`filePatchingExceptions[] = { "<UID>" };`	`{}`	Whitelisted clients ignore the rules defined by `allowedFilePatching` and `verifySignatures`, allowing them to join the server with any mods of their choice. Signature errors are still logged by the server upon connection. ⚠ Signature errors may still kick the user if the error happens before the server knows the clients SteamID, for example when trying to join with completely unsigned pbo's.	This entry has existed since 2016, but only became fully operational in 2.10
Server Behaviour
`voteThreshold = 0.33;`	`0.5`	Percentage of votes needed to confirm a vote. `33%` in this example.	N/A
`voteMissionPlayers = 3;`	`1`	Start mission-voting when X numberOfPlayers connect.	N/A
`allowedVoteCmds[] = { { "kick", false, false, 0.75 } };`	`{}`	See Arma 3: Mission voting.	N/A
`allowedVotedAdminCmds[] = { { "mission", true, true } };`	`{}`	See Arma 3: Mission voting.	N/A
`kickduplicate = 1;`	`0`	Do not allow duplicate game IDs. Second player with an existing ID will be kicked automatically. `1` means active, `0` disabled.	N/A
`loopback = 1;`	`false`	Adding this option will force server into LAN mode. This will allow multiple local instances of the game to connect to the server for testing purposes. At the same time it will prevent all non-local instances from connecting.	N/A
`upnp = 1;`	`false`	Automatically creates port mapping on UPNP/IGD enabled router. This option allows to create a server behind NAT (the router must have public IP and support UPNP/IGD protocol). Read more Internet Gateway Device (IGD) Standardized Device Control Protocol. ⚠ When enabled then this setting may delay server start-up by 600s (standard UDP timeout of 10 minutes) if blocked on firewall or bad routing etc. Thus in such case is recommended to disable it.	N/A
`allowedFilePatching = 0;`	`0`	Prevent or allow file patching for the clients (including the HC) 0 is no clients 1 is Headless Clients only 2 is all clients	1.50
`allowedLoadFileExtensions[] = { "sqf", "txt" };`	unknown	Only allow files with listed extensions to be loaded via loadFile command. Not listing any extension means everything is allowed. Defining the setting as empty arrays means nothing is allowed.	1.20
`allowedPreprocessFileExtensions[] = { "sqf", "sqs" };`	unknown	Only allow files with listed extensions to be loaded via preprocessFile / preprocessFileLineNumbers commands. Not listing any extension means everything is allowed. Defining the setting as empty arrays means nothing is allowed.	1.20
`allowedHTMLLoadExtensions[] = { "htm", "html" };`	unknown	Only allow files and URLs with listed extensions to be loaded via htmlLoad command. Not listing any extension means everything is allowed. Defining the setting as empty arrays means nothing is allowed.	1.28
`allowedHTMLLoadURIs[] = { "http://arma3.com" };`	unknown	Only allow files from listed URIs and URLs to be loaded via htmlLoad command. Comment out if not used. Can use += to add to the existing list. Not listing any extension means everything is allowed. Defining the setting as empty arrays means nothing is allowed.	N/A
`MaxPing = 200;`	`-1`	Max ping value until server kick the user	1.56
`MaxPacketLoss = 50;`	`-1`	Max packetloss value until server kick the user	1.56
`MaxDesync = 150;`	`-1`	Max desync value until server kick the user	1.56
`DisconnectTimeout = 5;`	`15`	Server wait time before disconnecting client after loss of active traffic connection, range 1 to 90 seconds.	1.56
`kickClientsOnSlowNetwork[] = { 0, 0, 0, 0 };`	`{ 1, 1, 1, 1 };`	Defines if `{<MaxPing>, <MaxPacketLoss>, <MaxDesync>, <DisconnectTimeout>`} will be logged (0) or kicked (1)	1.56
`enablePlayerDiag = 1;`	`0`	Logs players' bandwidth and desync info every 60 seconds, as well as "network message is pending" owner identity.	N/A
`callExtReportLimit = 1000;`	`1000`	If server initiated callExtension takes longer than specified limit in milliseconds, the warning will be logged into server `.rpt` file as well as reflected in the extension return result.	N/A
`kickTimeout[] = { { 0, -1 }, { 1, 180 }, { 2, 180 }, { 3, 180 } };`	`{ { 0, 60 }, { 1, 60 }, { 2, 60 }, { 3, 60 } };`	`kickTimeout[] = { { kickID, timeout }, ... };` kickID (type to determine from where the kick originated e.g. admin or votekick etc.) 0 - manual kick (vote kick, admin kick, bruteforce detection etc.) 1 - connectivity kick (ping, timeout, packetloss, desync) 2 - BattlEye kick 3 - harmless kick (wrong addons, steam timeout or checks, signatures, content etc.) timeout = in seconds how long until kicked player can return >0 seconds -1 until missionEnd -2 until serverRestart	1.90
`votingTimeOut = 60;`	`60`	Voting timeout	N/A
`votingTimeOut[] = { 60, 90 };`	`{ 60, 90 }`	Voteing timeout `{ ready, notReady }`	1.90
`roleTimeOut = 90;`	`90`	Role selection timout	N/A
`roleTimeOut[] = { 90, 120 };`	`{ 90, 120 }`	Role selection timeout `{ ready, notReady }`	1.90
`briefingTimeOut = 60;`	`60`	Briefing timeout	N/A
`briefingTimeOut[] = { 60, 90 };`	`{ 60, 90 }`	Briefing timeout `{ ready, notReady }`	1.90
`debriefingTimeOut = 45;`	`45`	Debriefing timeout	N/A
`debriefingTimeOut[] = { 45, 60 };`	`{ 45, 60 }`	Debriefing timeout `{ ready, notReady }`	1.90
`lobbyIdleTimeout = 300;`	`0`	Lobby idle timeout Independent of set lobbyIdleTimeout in the config file, it will be at least `MAX(votingTimeout, lobbyTimeout, briefingTimeout, debriefingTimeout) + 5 seconds` by default, this makes it 300 seconds of time for people in lobby and 95 in roleTimeout or briefing screen	1.90
`missionsToServerRestart = 8;`	`0`	Number of times missionEnd happens before server initiate process restart (uses actual session startup command-line parameters, not possible to combine with `missionsToShutdown` )	N/A
`missionsToShutdown = 8;`	`0`	Number of times missionEnd happens before server initiate process shutdown (has same behavior as setting named `missionsToHardRestart`)	N/A
`autoSelectMission = true;`	`false`	When enabled, the server auto-starts next mission in mission cycle and waits for players in the role selection. This allows full mission information in server browser and then results in proper filtering of the servers. This is lesser-variant (trimmed) of server startup command-line parameter `-autoInit`. Might collide with campaign linked missions / need mission cycle etc.	N/A
`randomMissionOrder = true;`	`false`	When enabled, the server random start / next selection with one of missions from mission rotation list. ( setting goes outside(before) Mission class {}; )	N/A
`disableChannels[] = { { 0, false, true } };`	`{}`	`disableChannels[] = { { channelID, text, voice }, ... }>;` ChannelID : Number - use single digit of (0 to 6) to define channelID. Default: No restriction to any channels, with text/von chat set to false. text : Boolean - use true to disable usage of text-chat for defined channelID. Default: false voice : Boolean - use true to disable usage of voice-chat (VON) for defined channelID. Default: false List of channels ID: 0 = Global 1 = Side 2 = Command 3 = Group 4 = Vehicle 5 = Direct 16 = System ⓘ Missions which use Description.ext#disableChannels will override any setting of disableChannels[] in the server.cfg.	-
Other Options
`verifySignatures = 2;`	`2`	Enables or disables the signature verification for addons. Verification disabled = `0`. `1` Will default back to `2`
`equalModRequired = 1;`	`0`	Outdated - If set to 1, players have to use exactly the same -No content provided- startup parameter as the server. (0 - disabled, 1 - enabled).	-
`drawingInMap = false;`	`true`	Enables or disables the ability to place markers and draw lines in map.	1.64
`disableVoN = 1;`	`0`	Enables or disables the Voice over Net.	N/A
`vonCodecQuality = 10;`	`3`	Defines VoN codec quality. Value range is from `1` to `20`. Since 1.62 supports range `1-20` Since 1.64 will support range `1-30` 8kHz is `0-10`, 16kHz is `11-20`, for `21-30` it is 32kHz for SPEEX codec and 48kHz for OPUS codec.	-
`vonCodec = 1;`	`1`	Defines VoN codec type. Value range is from `0` to `1`. Since Arma 3 update 1.58 supports value `1` Value `0` uses older SPEEX codec, while `1` switches to new IETF standard OPUS codec.	-
`skipLobby = false;`	`false`	If true, joining player will skip role selection. This is only used if no Mission, Campaign or Config setting `skipLobby` is defined (See Description.ext#skipLobby).	N/A
`allowProfileGlasses = false;`	`true`	If false, glasses set in player profile will be ignored. This is only used if no Mission, Campaign or Config setting `allowProfileGlasses` is defined (See Description.ext - allowProfileGlasses)	2.06
`zeusCompositionScriptLevel = 0;`	`1`	0: all scripts are forbidden 1: only attributes are allowed (including custom attributes added by mods) 2: all scripts are allowed including init scripts This is only used if no Mission, Campaign or Config setting `zeusCompositionScriptLevel` is defined (See Description.ext - zeusCompositionScriptLevel).	2.06
`logFile = "server_console.log";`	unknown	Enables output of dedicated server console into textfile. Default location of log is same as crash dumps and other logs. (Local settings) Note that this does not change the location of the "net.log" file, which is enabled with the `-netlog` command line option.	N/A
`doubleIdDetected = "command";`	`""`	See Server Side Scripting
`onUserConnected = "command";`	`""`		N/A
`onUserDisconnected = "command";`	`""`		N/A
`onHackedData = "command";`	`""`		N/A
`onDifferentData = "command";`	`""`		N/A
`onUnsignedData = "command";`	`""`		N/A
`onUserKicked = "command";`	`""`		N/A
`regularCheck = "command";`	`""`		N/A
`BattlEye = 1;`	`1`	Enables or disables the BattlEye anti-cheat engine. Requires installed BattlEye on server and clients joining the server	N/A
`timeStampFormat = "none";`	`""`	Set the timestamp format used on each report line in server-side RPT file. Possible values are "none", "short", "full".	N/A
`forceRotorLibSimulation = 0;`	`0`	Enforces the Advanced Flight Model on the server. `0` (up to the player). `1` - forced AFM, `2` - forced SFM.	1.34
`persistent = 1;`	`0`	Mission keeps running when all clients disconnect. Enabling the persistence option will make missions that have either base or instant respawn keep on running after all players have disconnected. The other respawn types will not make a mission persistent. The kind of respawn a certain mission uses is set in its Description.ext.	N/A
`requiredBuild = xxxxx;`	`0`	Minimum required client version. Clients with version lower than `requiredBuild` will not be able to connect. If `requiredBuild` is set to a large number, like `requiredBuild = 999999999;` for example, it will automatically be lowered to the current server version.	N/A
`statisticsEnabled = 1;`	`1`	Allows to opt-out of Arma 3 analytics for the server by using 0	1.56
`forcedDifficulty = "regular";`	`""`	Enforces the selected difficulty on the server. `forcedDifficulty = "<difficultyClass>";` If Recruit, Regular or Veteran is passed as the parameter, the particular difficulty options will be taken from data config, from the class CfgDifficultyPresets. If Custom will be passed as the parameter, the particular flags will be taken from CustomDifficulty class from server's profile (only Custom is saved to the profile). If mission cycle is defined in the server.cfg, the difficulty set in the mission cycle overrides the difficulty set by forcedDifficulty parameter.	1.56
`missionWhitelist[] = { "intro.altis" };`	`{}`	Limit the available missions for the admin for the mission change. See Arma 3: MP Mission Names for a full list.	1.56
`steamProtocolMaxDataSize = 1024;`	`1024`	Limit for maximum Steam Query packet length. Increasing this value is dangerous as it can cause Arma 3 server to send UDP packets of a size larger than the MTU. This will cause UDP packets to be fragmented which is not supported by some older routers. But increasing this will fix the modlist length limit in Arma 3: Launcher.	2.00
class AdvancedOptions { LogObjectNotFound = true; // logging enabled SkipDescriptionParsing = false; // parse description.ext ignoreMissionLoadErrors = false; // do not ingore errors queueSizeLogG = 1000000; // if a specific players message queue // is larger than 1MB and #monitor is running, // dump his messages to a logfile for analysis };	N/A	2.02 LogObjectNotFound - false to skip logging "Server: Object not found" messages SkipDescriptionParsing - true to skip parsing of description.ext/mission.sqm. Will show pbo filename instead of configured missionName. OverviewText and such won't work, but loading the mission list is a lot faster when there are many missions 2.04 ignoreMissionLoadErrors - when set to true, the mission will load no matter the amount of loading errors. If set to false, the server will abort mission's loading and return to mission selection 2.08 queueSizeLogG - if `#monitor` is running and a player's Guaranteed Message Queue size (Listed as G: in `#monitor`) goes above the threshold, all that player's message types and sizes are dumped to a logfile in the RPT directory (see Crash Files); the dumping itself is logged server-side.	2.02 2.04 2.08
`armaUnitsTimeout = 30;`	`30`	Defines how long the player will be stuck connecting and wait for armaUnits data. Player will be notified if timeout elapsed and no units data was received	2.06
`overrideHazeQuality = 1;`	`-1`	0/1/2 - VeryLow/Low/Standard - Forces haze quality in MP on all clients. Standard (2) - mod config driven. Default (-1) - do not force. Mission config's overrideHazeQuality has priority over the server option.	2.16
class AntiFlood { cycleTime = 0.5; cycleLimit = 400; cycleHardLimit = 4000; enableKick = 0; };	cycleTime = 0.5; cycleLimit = 400; cycleHardLimit = 4000; enableKick = 0;	`cycle` is time in seconds. Every cycle, if player sends more than "limit" number of messages, they get flagged. If the last 4 out of 8 cycles were flagged or if within one cycle the hard limit is exceeded, the player is kicked (if `enableKick` is set to true) or logged to RPT that they exceeded the limit.	2.18

Server Administration

If BattlEye RCon is not in use, there can only be 1 server admin at any given time. There are two ways of becoming admin, through a vote or through login with authenticated credentials.

Voted In Admin

It is possible to become a server administrator through player voting process. Such admin has less abilities than logged in admin.
For example, voted in admin would be able to kick a player, but only logged in admin would be able to ban a player.
For more information on voting and voting configuration see page Server Voting.

Logged In Admin

To log in as admin, one is required to type in#login command followed by server password, which matches password defined in passwordAdmin param.
Since Arma 2:OA it is possible to add one or several user ids UIDs into admins[] server config parameter, which would allow listed users to log in as admin by simply typing #login without a password.
This presents several advantages for managing the servers. The server owner can have multiple admins selected from the community and doesn't have to provide each one with server admin password.
The adding and removing of UIDs is done on the server side which makes it easy to add and to remove admins if necessary. On the server, admins are handled on first come first served basis.
Here are the rules:

If there is already a logged in admin on the server, the new admin will not be able to log in until previously logged in admin logs out
If there is a voted in admin on the server, the logged in admin will override voted in admin and take admin role
There is no difference between logged in admin that used admin password or logged in admin that was whitelisted with admins[] param

The logged in and voted in admins have different set of Multiplayer Server Commands available to them. See serverCommandAvailable for more information.

Server Security

Several of these settings directly contribute to the security of the server and have been highlighted as important, particularly for running public - no password - servers.

The most updated ones that give a good protection (and are, de facto, the standard for public servers) are

battlEye = 1;
verifySignatures = 2;
allowedFilePatching = 0;
allowedLoadFileExtensions[] = { "hpp", "sqs", "sqf", "fsm", "cpp", "paa", "txt", "xml", "inc", "ext", "sqm", "ods", "fxy", "lip", "csv", "kb", "bik", "bikb", "html", "htm", "biedi" };
allowedPreprocessFileExtensions[] = { "hpp", "sqs", "sqf", "fsm", "cpp", "paa", "txt", "xml", "inc", "ext", "sqm", "ods", "fxy", "lip", "csv", "kb", "bik", "bikb", "html", "htm", "biedi" }; // ,"sqfc" // add .sqfc if used
allowedHTMLLoadExtensions[] = { "htm", "html", "xml", "txt" };
// allowedHTMLLoadURIs[] = {};
passwordAdmin = "xyzxyz123";
serverCommandPassword = "xyzxyz456";

Notes

The properties allowedLoad*/allowedPreprocess*/allowedHTML* are server.cfg settings with array list of extensions for server-side use only. The above listed examples are for basic game multiplayer modes. Server admins may attempt to make it stricter for their servers. However, if too strict then server's log file will contain warning entries about unable read.

With the exception of allowedHTMLLoadURIs those arrays covers both files inside and outside PBOs so don't change the above defaults w/o testing first as there is a chance it will break the game.

To read loadFile , preprocessFile , preprocessFileLineNumbers and to remember, those works on files only-within Arma 3 server directory and its sub-directories!
Refer to ArmA: Addon Signatures for current best practices in server mod signing and the use of key signature files.
To further increase servers security, remember that BattlEye has the ability to use server-side (including preventing remote execution) and client-side script check filters.
- These BattlEye filters needs to be written specifically for each mission and mod as the scripting differs in each of them.

Safe Folder Structure

Engine supports absolute outside Arma 3 server folder for command-line parameters -servermod=, -mod= and same for profile directories and config locations. This puts those out of reach by various load script command features which are limited only within Arma 3 folder and it is sub-directories for security reason. thus e.g. safe folder-structure looks like:

\arma3server\
\arma3server\@publicmods\
\arma3server_servermods_secrethash\
\arma3server_profiles_and_configs_secrethash\

Note that callExtensions are loaded only from Arma 3 server root / sub-folders

Example Configuration File

// server.cfg

// GLOBAL SETTINGS
hostname = "Fun and Test Server";		// The name of the server that shall be displayed in the public server list
password = "";							// Password for joining, eg connecting to the server
passwordAdmin = "xyz";					// Password to become server admin. When in Arma MP and connected to the server, type '#login xyz'
serverCommandPassword = "xyzxyz";		// Password required by alternate syntax of [[serverCommand]] server-side scripting.

logFile = "server_console.log";			// Where the logfile should go and what it should be called

// WELCOME MESSAGE ("Message Of The Day")
// It can be several lines, separated by comma
// Empty messages "" will not be displayed at all but are only for increasing the interval
motd[] =
{
	"", "",
	"Two empty lines above to increase the time interval",
	"Welcome to our server",
	"", "",
	"We are looking for fun - Join us Now!",
	"http://www.example.com",
	"One more empty line below to increase interval",
	""
};
motdInterval = 5;					// Time interval (in seconds) between each message

// JOINING RULES
maxPlayers = 64;					// Maximum amount of players. Civilians and watchers, beholder, bystanders and so on also count as player.
kickDuplicate = 1;					// Each ArmA version has its own ID. If kickDuplicate is set to 1, a player will be kicked when he joins a server where another player with the same ID is playing.
verifySignatures = 2;				// Verifies .pbos against .bisign files. Valid values 0 (disabled), 1 (prefer v2 sigs but accept v1 too) and 2 (only v2 sigs are allowed).
equalModRequired = 0;				// Outdated. If set to 1, player has to use exactly the same -mod= startup parameter as the server.
allowedFilePatching = 0;			// Allow or prevent client using -filePatching to join the server. 0, is disallow, 1 is allow HC, 2 is allow all clients (since Arma 3 v1.50)
filePatchingExceptions[] = { "123456789", "987654321" }; // Whitelisted Steam IDs allowed to join with -filePatching enabled
// requiredBuild = 12345;			// Require clients joining to have at least build 12345 of game, preventing obsolete clients to connect

// VOTING
voteMissionPlayers = 1;				// Tells the server how many people must connect so that it displays the mission selection screen.
voteThreshold = 0.33;				// 33% or more players need to vote for something, for example an admin or a new map, to become effective

// INGAME SETTINGS
disableVoN = 0;					// If set to 1, Voice over Net will not be available
vonCodec = 1; 					// If set to 1 then it uses IETF standard OPUS codec, if to 0 then it uses SPEEX codec (since Arma 3 v1.58)
vonCodecQuality = 30;			// 0..10 = 8kHz, 11..20 = 16kHz, 21..30 = 32kHz (48kHz)
persistent = 1;					// If 1, missions still run on even after the last player disconnected.
timeStampFormat = "short";		// Set the timestamp format used on each report line in server-side RPT file. Possible values are "none" (default), "short", "full".
BattlEye = 1;					// Server to use BattlEye system
allowedLoadFileExtensions[] = { "hpp", "sqs", "sqf", "fsm", "cpp", "paa", "txt", "xml", "inc", "ext", "sqm", "ods", "fxy", "lip", "csv", "kb", "bik", "bikb", "html", "htm", "biedi" }; // only allow files with those extensions to be loaded via loadFile command (since Arma 3 build 1.19.124216)
allowedPreprocessFileExtensions[] = { "hpp", "sqs", "sqf", "fsm", "cpp", "paa", "txt", "xml", "inc", "ext", "sqm", "ods", "fxy", "lip", "csv", "kb", "bik", "bikb", "html", "htm", "biedi" }; // only allow files with those extensions to be loaded via preprocessFile/preprocessFileLineNumber commands (since Arma 3 build 1.19.124323)
allowedHTMLLoadExtensions[] = { "htm", "html", "xml", "txt" }; // only allow files with those extensions to be loaded via HTMLLoad command (since Arma 3 build 1.27.126715)
// allowedHTMLLoadURIs[] = {}; // Leave commented to let missions/campaigns/addons decide what URIs are supported. Uncomment to define server-level restrictions for URIs

// TIMEOUTS
disconnectTimeout = 5;			// Time to wait before disconnecting a user which temporarly lost connection. Range is 5 to 90 seconds.
maxDesync = 150;				// Max desync value until server kick the user
maxPing= 200;					// Max ping value until server kick the user
maxPacketLoss = 50;				// Max packetloss value until server kick the user
kickClientsOnSlowNetwork[] = { 0, 0, 0, 0 }; // Defines if {<MaxPing>, <MaxPacketLoss>, <MaxDesync>, <DisconnectTimeout>} will be logged (0) or kicked (1)
kickTimeout[] = { { 0, -1 }, { 1, 180 }, { 2, 180 }, { 3, 180 } };
votingTimeOut[] = { 60, 90 };		// Kicks users from server if they spend too much time in mission voting
roleTimeOut[] = { 90, 120 };		// Kicks users from server if they spend too much time in role selection
briefingTimeOut[] = { 60, 90 };		// Kicks users from server if they spend too much time in briefing (map) screen
debriefingTimeOut[] = { 45, 60 };	// Kicks users from server if they spend too much time in debriefing screen
lobbyIdleTimeout = 300;				// The amount of time the server will wait before force-starting a mission without a logged-in Admin.

// SCRIPTING ISSUES
onUserConnected = "";
onUserDisconnected = "";
doubleIdDetected = "";

// SIGNATURE VERIFICATION
onUnsignedData = "kick (_this select 0)";	// unsigned data detected
onHackedData = "kick (_this select 0)";		// tampering of the signature detected
onDifferentData = "";				// data with a valid signature, but different version than the one present on server detected

// MISSIONS CYCLE (see below)
randomMissionOrder = true;	// Randomly iterate through Missions list
autoSelectMission = true;	// Server auto selects next mission in cycle

class Missions {};			// An empty Missions class means there will be no mission rotation

missionWhitelist[] = {};	// An empty whitelist means there is no restriction on what missions' available

↑ Back to spoiler's top

Mission Rotation

One can set an automatic mission rotation. Without an admin, the server will automatically select a mission when at least one player is connected.
Once the mission is done and if there are still players on the server, it will automatically switch to the next mission in the cycle.

General definition:

class Missions
{
	class CUSTOMNAME
	{
		template = "MISSION.TERRAIN";
		difficulty = "DIFFICULTYLEVEL";
		class Params
		{
			MISSIONPARAMETER1 = VALUE;
			MISSIONPARAMETER2 = VALUE;
			MISSIONPARAMETER3 = VALUE;
		};
	};
};

⚠

The keyword class for class definitions must be lowercase, otherwise a parsing error will occur.

Parameters

The template and difficulty must be defined. Parameter definition is optional.

Template

The entry naming is always missionName.terrainName.

The name can come from the different options:

Mission PBO in MPMissions folder - like MyMission.MyTerrain.pbo
Mission folder in MPMissions folder - like MyMission.MyTerrain\mission.sqm
Addon Mission loaded via some mod (folder) - in such case it must be defined via a config.cpp in class CfgMissions/class MPMissions. You determine the naming with the config viewer.

⚠

The crucial part in the case of Addon Mission is that its className.terrainName - NOT the mission folder name! Good practice is to name the class the same as the folder, but it is not always the case. So watch out and use only the class name + terrain name.

Sample definition from CfgMissions/MPMissions relevant for Addon Mission':

class CfgMissions
{
	class MPMissions
	{
		class MP_Marksmen_01
		{
			briefingName = "End Game 16 Kavala";
			directory = "A3\Missions_F_MP_Mark\MPScenarios\MP_Marksmen_01.Altis";
		};

		class EscapeFromMalden//class name not the same as mission folder name!
		{
			briefingName = "Escape 10 Malden";
			directory = "A3\Missions_F_Patrol\MPScenarios\MP_EscapeFromMalden.Malden";
		};

		class MP_CombatPatrol_01
		{
			briefingName = "COOP 12 Combat Patrol";
			directory = "A3\Missions_F_Patrol\mpscenarios\MP_CombatPatrol_01.Altis";
		};

		class Apex
		{
			briefingName = "Apex Protocol";
			class EXP_m01
			{
				briefingName = "01 Keystone";
				directory = "a3\missions_f_exp\campaign\missions\exp_m01.tanoa";
			};
		};
};

Difficulty

Set the desired enforced difficulty level.

The standard options are:

Recruit
Regular
Veteran
Custom

For more see: Difficulty Settings

ⓘ

Some mods or CDLCs define additional difficulty levels. You determine the naming with the config viewer in CfgDifficultyPresets.
When difficulty is set to difficulty = "Custom"; the server will look into USERNAME.Arma3Profile file for the definition of custom difficulty, which should look like this: see server.armaprofile - Server Difficulty Example.

class Params

A mission may offer mission parameters. You can apply a different default for the given mission in your mission rotation by setting the key-value pair in here.
To determine if/what mission parameters are available, you need to exact the mission pbo to get to the Description.ext.
The actual definition may also be found in another files if #include "PATH\FILE.extension" is used.

class Missions
{
	class TestMission01 // name for the first entry - can be anything (characters/numbers/underscore, but no spaces!)
	{
		template = "MP_Marksmen_01.Altis";
		difficulty = "recruit";
		class Params
		{
			RespawnDelay = 15;			// default 30
			EndGameRespawnDelay = 30;	// default 45
		};
	};

	class TestMission02
	{
		template = "EscapeFromMalden.Malden";
		difficulty = "regular";
		class Params
		{
			Loadouts = 0;				// default 1
			EnemyEquipment = 0;			// default 1
		};
	};

	class TestMission03
	{
		template = "MP_CombatPatrol_01.Altis";
		difficulty = "veteran";
		class Params
		{
			BIS_CP_reinforcements = 2;	// default 0
			BIS_CP_tickets = 5;			// default 20
		};
	};

	class TestMission04
	{
		template = "EXP_m01.Tanoa";		// Apex Protocol - COOP campaign
		difficulty = "custom";
		class Params
		{
		};
	};
};

ⓘ

Execute the Mission Parameters export script from the Debug Console to export the current mission's parameters set in order to use it in the mission rotation class.

Arma 3 Apex - Mission Collection

Mainly intended for MP campaigns. If the progress is defined in the MPMissions class, server administrator can simply add the whole campaign by adding campaign class into the server.cfg. See the example below.

config.cpp:

class MPMissions
{
	class Apex
	{
		briefingName = "$STR_A3_CoopCampaignName";

		class EXP_m01
		{
			briefingName = "$STR_A3_exp_m01_missionname";
			directory = "a3\missions_f_exp\campaign\missions\exp_m01.tanoa";
		};

		class EXP_m02
		{
			briefingName = "$STR_A3_exp_m02_missionname";
			directory = "a3\missions_f_exp\campaign\missions\exp_m02.tanoa";
		};

		class EXP_m03
		{
			briefingName = "$STR_A3_exp_m03_missionname";
			directory = "a3\missions_f_exp\campaign\missions\exp_m03.tanoa";
		};
	};
};

server.cfg:

// MISSIONS CYCLE
class Missions
{
	class Apex{};
};

Also the difficulty of the each mission can be overridden

class Missions
{
	class Apex
	{
		class EXP_m01
		{
			difficulty = "veteran";
		};
	};
};

Important Settings

In the Server Config File

autoSelectMission
randomMissionOrder
persistent
missionsToServerRestart and missionsToShutdown
votingTimeOut, roleTimeOut, briefingTimeOut and debriefingTimeOut

And from Startup Parameters:

loadMissionToMemory
autoInit

Additional Details

For hosting server behind NAT or firewall, please ensure gameport and STEAMports are forwarded and open!
Set the ICMP "echo reply" as allowed so the server is able return ping delay properly.
It's recommended to enable the NAT traversal (so called "Edge traversal" in Windows Firewall) for arma3server.exe, arma3.exe to better support clients/servers behind NAT.

Mission Parameters Override

On dedicated server, only an admin can set mission options provided by mission maker via class Params. However as a server owner it is possible to override default setting with your own. See Mission Parameters for more info.

Server Config File – Arma 3

Latest revision as of 07:40, 10 December 2024

Contents

Server Options

Server Administration

Voted In Admin

Logged In Admin

Server Security

Notes

Safe Folder Structure

Example Configuration File

Mission Rotation

Parameters

Template

Difficulty

class Params

Arma 3 Apex - Mission Collection

Important Settings

Additional Details

Mission Parameters Override

Navigation menu

Server Config File – Arma 3

Latest revision as of 07:40, 10 December 2024

Server Options

Server Administration

Voted In Admin

Logged In Admin

Server Security

Notes

Safe Folder Structure

Example Configuration File

Mission Rotation

Parameters

Template

Difficulty

class Params

Arma 3 Apex - Mission Collection

Important Settings

Additional Details

Mission Parameters Override

Navigation menu

Search