setVectorDirAndUp

Game1 needed - Version1 needed

LALocalGEGlobal

Hover & click on the images for description

Description

Description:

Description needed

Multiplayer:

setVectorDirAndUp must be executed on the machine where the object it applied to is local.

Groups:

Math - Vectors

Syntax

Syntax:

Syntax needed

Parameters:

vehicle: Object

[[x1, y1, z1], [x2, y2, z2]]: Array

[x1, y1, z1]: Array - vectorDir

[x2, y2, z2]: Array - vectorUp

Return Value:

Return value needed

Examples

Example 1:

// set exact yaw, pitch, and roll _y = 45; _p = -80; _r = 0; BRICK setVectorDirAndUp [ [sin _y * cos _p, cos _y * cos _p, sin _p], [[sin _r, -sin _p, cos _r * cos _p], -_y] call BIS_fnc_rotateVector2D ];

Example 2:

To rotate BRICK on Z axis 90 degrees clockwise, change its vectorDir but leave vectorUp unchanged. BRICK setVectorDirAndUp [[1,0,0], [0,0,1]];

Example 3:

To rotate BRICK on Y axis 90 degrees clockwise, change its vectorUp but leave vectorDir unchanged. BRICK setVectorDirAndUp [[0,1,0], [1,0,0]];

Example 4:

To rotate BRICK on X axis 90 degrees (tilt forward), change both vectorDir and vectorUp accordingly. BRICK setVectorDirAndUp [[0,0,-1], [0,1,0]];

Example 5:

More complex orientations // tilt forward 90 + rotate left 90 BRICK setVectorDirAndUp [[1,0,0], [0,1,0]]; // tilt backward 45 degrees BRICK setVectorDirAndUp [[0,0.5,0.5], [0,-0.5,0.5]]; // tilt forward 30 degrees BRICK setVectorDirAndUp [[0,0.66,-0.33], [0,0.33,0.66]];

Additional Information

See also:

vectorDirvectorUpsetVectorDirsetVectorUpvectorDiffvectorAddvectorMultiplyvectorCrossProductvectorDistancevectorMagnitudeSqrvectorDistanceSqrvectorCosvectorMagnitudevectorDotProductvectorNormalizedvectorFromToBIS_fnc_transformVectorDirAndUp

Notes

Report bugs on the Feedback Tracker and/or discuss them on the Arma Discord or on the Forums.
Only post proven facts here! Add Note

Posted on March 16, 2008 - 09:50

Str

Command can be also used to rotate camera in all three axis (which also mean it is possible to set camera bank).

Posted on May 9, 2008 - 09:32

General Barron

The object's vectorDir can only control its pitch, while its vectorUp can only control its bank. To set an object's yaw (direction), use the setdir command, before using this command. You would think vectorUp would control pitch as well, but any pitch that would be set due to vectorUp is ignored. The same is true with vectorDir and yaw; any vectorDir that would adjust yaw is also ignored. If this doesn't make sense, try to visualize it with a box or soda can. This command does NOT work with values relative to a unit, but rather it works with world vectors (think world coordinates as opposed to model coordinates). As a result, this command can be difficult to use in many situations, because the input values needed to get a certain pitch / bank for an object vary, depending on what direction the object is facing (yaw). A function to set an object's pitch / bank can be found here _{(dead link)}

Posted on October 23rd, 2009 - 18:39

Chris330

Note this odd command may now be better understood. There's a thread about it here: BI Studios Forum Thread

Posted on 1 Jun, 2014 - 1845

ffur2007slx2_5

1.20 setDir overwrites setVectorDirAndUp (P.S. setVectorDirAndUp also affects setVelocity.), so use setDir before BIS_fnc_setPitchBank, which is an easier workaround on vector, if changing yaw, pitch and bank are needed. setVectorDirAndUp is CCW, so if we wanna to set an obj 40 degrees CW, 170 degrees pitch and 85 degrees bank: _obj setDir (40 - 180); [_obj, 170, 85] call BIS_fnc_setPitchBank; Same as: _obj setVectorDirAndUp [[0.63,0.75,0.17],[-0.75,0.65,-0.084]]; Be aware that attachTo may flip vectorDir if pitch beyond 90 degrees and cause unexpected behavior to BIS_fnc_setPitchBank, e.g. [_obj, 100, 0] call BIS_fnc_setPitchBank; //vector: [-0.14,-0.09,0.98],[-0.83,-0.51,-0.17] _obj attachTo [_logic,[0,0,2]]; [_obj, 100, 0] call BIS_fnc_setPitchBank; //vector: [0.11,0.33,0.93],[-0.06,0.94,-0.32] compass direction algorism failed if obj was attached at present. To overcome such limitation we can use fallowing function for a better workaround. (code originated from 'bapedibupa, remodified) _obj attachTo [_logic,[0,0,2]]; [_obj,[120,-78,37]] call fnc_SetPitchBankYaw; // pitch: 120, bank: -78, yaw: 37 fnc_SetPitchBankYaw = { private ["_object","_rotations","_aroundX","_aroundY","_aroundZ","_dirX","_dirY", "_dirZ","_upX","_upY","_upZ","_dir","_up","_dirXTemp","_upXTemp"]; _object = _this select 0; _rotations = _this select 1; _aroundX = _rotations select 0; _aroundY = _rotations select 1; _aroundZ = (360 - (_rotations select 2)) - 360; _dirX = 0; _dirY = 1; _dirZ = 0; _upX = 0; _upY = 0; _upZ = 1; if (_aroundX != 0) then { _dirY = cos _aroundX; _dirZ = sin _aroundX; _upY = -sin _aroundX; _upZ = cos _aroundX; }; if (_aroundY != 0) then { _dirX = _dirZ * sin _aroundY; _dirZ = _dirZ * cos _aroundY; _upX = _upZ * sin _aroundY; _upZ = _upZ * cos _aroundY; }; if (_aroundZ != 0) then { _dirXTemp = _dirX; _dirX = (_dirXTemp* cos _aroundZ) - (_dirY * sin _aroundZ); _dirY = (_dirY * cos _aroundZ) + (_dirXTemp * sin _aroundZ); _upXTemp = _upX; _upX = (_upXTemp * cos _aroundZ) - (_upY * sin _aroundZ); _upY = (_upY * cos _aroundZ) + (_upXTemp * sin _aroundZ); }; _dir = [_dirX,_dirY,_dirZ]; _up = [_upX,_upY,_upZ]; _object setVectorDirAndUp [_dir,_up]; };