Mission Event Handlers – Arma 3

Description

Mission event handlers are specific EHs that are anchored to the running mission and automatically removed when mission is over. These events fire only on the machine where they have been added.
For all other available EHs see the Event Handlers main page.

Related Commands

Events

1.68

4

Fired each time a building model changes, for example due to stages of destruction.

addMissionEventHandler ["BuildingChanged", {
	params ["_previousObject", "_newObject", "_isRuin"];
}];

from: Object - building it changes from
to: Object - building it changes to
isRuin: Boolean - true if changes to ruins

1.58

4

Executes assigned code when user switches to/from HC command mode (Left Shift + Space). Stackable version of onCommandModeChanged.

addMissionEventHandler ["CommandModeChanged", {
	params ["_isHighCommand", "_isForced"];
}];

isHighCommand: Boolean - same as _isHighCommand param
isForced: Boolean - true if command mode was forced

1.00

4

Triggers when control of a vehicle is shifted (pilot->co-pilot, co-pilot->pilot), usually when user performs an action such as TakeVehicleControl, SuspendVehicleControl, UnlockVehicleControl, LockVehicleControl, or when enableCopilot command is used. This event handler will always fire on the PC where action is triggered as well as where the vehicle is local at the time. When control of the vehicle is shifted, the locality of the vehicle changes to the locality of the new controller. Since Arma 3 v1.96 this EH is extended with additional params.

addMissionEventHandler ["ControlsShifted", {
	params ["_newController", "_oldController", "_vehicle", "_copilotEnabled", "_controlsUnlocked"];
}];

newController: Object - unit currently controlling the vehicle
oldController: Object - unit previously controlling the vehicle
vehicle: Object - the vehicle for which controls shifted
copilotEnabled: Boolean - true if copilot is enabled
controlsUnlocked: Boolean - true if controls are unlocked

0.50

4

Runs the EH code each frame in unscheduled environment. Client side EH only (presence of UI). Will stop executing when UI loses focus (if user Alt+Tabs for example). Usually used with drawIcon3D, drawLine3D.

addMissionEventHandler ["Draw3D", {
	// no params
}];

1.58

4

Executes assigned code each frame. Stackable version of onEachFrame.

addMissionEventHandler ["EachFrame", {
	// no params
}];

0.50

4

Triggered when mission ends, either using trigger of type "End", endMission command, BIS_fnc_endMission function or ENDMISSION cheat.

addMissionEventHandler ["Ended", {
	params ["_endType"];
}];

endType: String - mission end type. Used in Debriefing among other things.

1.60

4

Triggered when the server switches off from "playing" state (mission ends, server closes, etc.) It's only for MP games, it is called on server and also on clients. It's not called on clients when client disconnects from server (and mission continues). This EH has no arguments passed to the code.

addMissionEventHandler ["MPEnded", {
// code to execute
}];

If you need to execute client code on disconnect, you can use this instead:

0 spawn
{
	waitUntil {!isNull findDisplay 46};
	findDisplay 46 displayAddEventHandler ["Unload",
	{
		// code here gets executed on the client at end of mission, whether due to player abort, loss of connection, or mission ended by server; might not work on headless clients
	}];
};

1.56

4

Triggered when an entity is killed.

addMissionEventHandler ["EntityKilled", {
	params ["_unit", "_killer", "_instigator", "_useEffects"];
}];

killed: Object - entity that was killed
killer: Object - the killer (vehicle or person)
1.66 instigator: Object - person who pulled the trigger
1.68 useEffects: Boolean - same as useEffects in setDamage alt syntax

It's worth noting that instigator param is objNull during road kill. To work around this issue try:

addMissionEventHandler ["EntityKilled",
{
	params ["_killed", "_killer", "_instigator"];
	if (isNull _instigator) then {_instigator = UAVControl vehicle _killer select 0}; // UAV/UGV player operated road kill
	if (isNull _instigator) then {_instigator = _killer}; // player driven vehicle road kill
	hint format ["Killed By %1", name _instigator];
}];

1.56

4

Triggered when an entity is respawned.

addMissionEventHandler ["EntityRespawned", {
	params ["_entity", "_corpse"];
}];

newEntity: Object - respawned entity
oldEntity: Object - corpse/wreck

1.96

4

Triggered when an extension calls provided function pointer with 3 params.

addMissionEventHandler ["ExtensionCallback", {
	params ["_name", "_function", "_data"];
}];

name: String - user provided param
function: String - user provided param
data: String - user provided param

2.04

4

Triggered when a Group is created. Note that the group contains no units at that point!

addMissionEventHandler ["GroupCreated", {
	params ["_group"];
}];

group: Group - the created group

2.04

4

Triggered when a Group is manually or automatically deleted.

addMissionEventHandler ["GroupDeleted", {
	params ["_group"];
}];

group: Group - the deleted group

1.58

4

Executes assigned code when user clicks on the HC group icon on the map. If groupIconSelectable is true, LMB clicking (firing) at the HC group icon on the HUD will also trigger the event. To set group icon selectable use setGroupIconsSelectable. Stackable version of onGroupIconClick.

addMissionEventHandler ["GroupIconClick", {
	params [
		"_is3D", "_group", "_waypointId",
		"_mouseButton", "_posX", "_posY",
		"_shift", "_control", "_alt"
	];
}];

is3D: Boolean - true if HUD icon, false if main map icon
group: Group - group the icon belonds to
wpID: Number - waypoint ID
mb: Number - mouse button: 0 - LMB, 1 - RMB (only applicable to IconClick)
posX: Number - screen X of the mouse
posY: Number - screen Y of the mouse
shift: Boolean - true if Shift key was pressed
ctrl: Boolean - true if Ctrl key was pressed
alt: Boolean - true if Alt key was pressed

1.58

4

Continuously executes assigned code when user hovers with pointer over the HC group icon, either on the HUD or the main map. groupIconSelectable must be set to true for this EH to work at all. To set group icon selectable use setGroupIconsSelectable. When EH fires over the HUD icon, X and Y coordinates will change depending on the position of the pointer in relation to the icon area. When over main map, the X and Y do not change and indicate icon center. Stackable version of onGroupIconOverEnter.

addMissionEventHandler ["GroupIconOverEnter", {
	params [
		"_is3D", "_group", "_waypointId",
		"_posX", "_posY",
		"_shift", "_control", "_alt"
	];
}];

is3D: Boolean - true if HUD icon, false if main map icon
group: Group - group the icon belonds to
wpID: Number - waypoint ID
posX: Number - screen X of the mouse
posY: Number - screen Y of the mouse
shift: Boolean - true if Shift key was pressed
ctrl: Boolean - true if Ctrl key was pressed
alt: Boolean - true if Alt key was pressed

1.58

4

Executes assigned code when user moves the pointer away from HC group icon it was over. Fires either for on the HUD icons or the main map HC icons. groupIconSelectable must be set to true for this EH to work at all. To set group icon selectable use setGroupIconsSelectable. Stackable version of onGroupIconOverLeave.

addMissionEventHandler ["GroupIconOverLeave", {
	params [
		"_is3D", "_group", "_waypointId",
		"_posX", "_posY",
		"_shift", "_control", "_alt"
	];
}];

is3D: Boolean - true if HUD icon, false if main map icon
group: Group - group the icon belonds to
wpID: Number - waypoint ID
posX: Number - screen X of the mouse
posY: Number - screen Y of the mouse (Y is always 0 when leaving HUD icon for some reason)
shift: Boolean - true if Shift key was pressed
ctrl: Boolean - true if Ctrl key was pressed
alt: Boolean - true if Alt key was pressed

1.90

4

Fires when user changes time acceleration with +/- keys in SP or setAccTime command. If the code returns true the on-screen message confirming the change is not displayed. Doesn't fire if desired value is already set.

addMissionEventHandler ["HandleAccTime", {
	params ["_currentTimeAcc", "_prevTimeAcc", "_messageSuppressed"];
}];

currentTimeAcc: Number - current value
prevTimeAcc: Number - previous value
messageSuppressed: Boolean - true if on-screen message was suppressed

2.00

4

Fires when a message is received, before adding it to the chat feed. Fires clientside. The output message could be overridden:

Return true to block incoming chat message from being added to the chat feed.
Return String to replace the chat message content but not the sender name.
Return Array [from, text] to replace both the chat message content and the the sender's name.

ⓘ

Only the last added EH with override will be used to override the message.

⚠

Do not put any of the chat related script command such as systemChat, sideChat, etc in this EH code as it would naturally cause recursion and the game will freeze.

addMissionEventHandler ["HandleChatMessage", {
	params ["_channel", "_owner", "_from", "_text", "_person", "_name", "_strID", "_forcedDisplay", "_isPlayerMessage", "_sentenceType", "_chatMessageType"];
}];

channel: Number - See radio channel indexes (16 for system chat message for example)
owner: Number - owner id of the sender:
- In SP: 0
- In MP with no sender: clientOwner
- In MP with sender: sender's clientOwner, or if AI - creator id part of netId of the AI
from: String - sender's formatted name as appeared on the chat
text: String - the chat message
person: Object - sender's object
name: String - sender's name, could be different from from
strID: String - sender's network player ID (marker id):
- "-1": means not available
- "0": means isPlayer in SP
- "1": means AI in SP or MP
- >1: getPlayerID in MP
forcedDisplay: Boolean - if the message should be displayed when the chat list is disabled (when enableRadio is set to false radio protocol messages won't display)
isPlayerMessage: Boolean - if the message is addressed to player
sentenceType: Number - 0: Normal type, 1: Protocol type
chatMessageType: Number - 0: Generic type, 1: SimpleMove type, 2: KillConfirmation type

1.32 SEServer

4

Triggered when player disconnects from the game. Similar to onPlayerDisconnected event but can be stacked and contains the unit occupied by player before disconnect. Must be added on the server and triggers only on the server.

addMissionEventHandler ["HandleDisconnect", {
	params ["_unit", "_id", "_uid", "_name"];
	true;
}];

unit: Object - unit formerly occupied by player
id: Number - same as _id in onPlayerDisconnected
uid: String - same as _uid in onPlayerDisconnected
name: String - same as _name in onPlayerDisconnected

Override: If this EH code returns true, the unit, previously occupied by player, gets transferred to the server, becomes AI and continues to live, even with description.ext param disabledAI = 1;

1.58

4

Executes assigned code when user selects available HC group (F1, F2…). Stackable version of onHCGroupSelectionChanged.

addMissionEventHandler ["HCGroupSelectionChanged", {
	params ["_group", "_isSelected"];
}];

group: Group - group selected (same as _group param)
isSelected: Boolean - true if selected (same as _isSelected param)

0.50

4

Triggered when mission is loaded from save.

⚠

"Loaded" event handler should be added BEFORE the mission is loaded from save. Placing it in a function with preInit = 1; usually does the trick.

addMissionEventHandler ["Loaded", {
	params ["_saveType"];
}];

saveType: String - save type, can be have following values:
- "save" - custom save, achieved by pressing SAVE button in the pause menu
- "autosave" - automatic checkpoint, saved using saveGame command
- "continue" - saved when leaving a mission to the main menu

1.62

4

Triggered when map is opened or closed either by user action or script command openMap.

addMissionEventHandler ["Map", {
	params ["_mapIsOpened", "_mapIsForced"];
}];

mapIsOpened: Boolean - true if map is opened
mapIsForced: Boolean - true if map is forced

1.58

4

Executes assigned code when user clicks anywhere on the main map. Stackable version of onMapSingleClick with some limitations:

No arguments can be passed to the assigned code in comparison with the original EH
Does not have engine default functionality override like the original EH

addMissionEventHandler ["MapSingleClick", {
	params ["_units", "_pos", "_alt", "_shift"];
}];

units: Array - leader selected units, same as groupSelectedUnits (same as _units param)
pos: Array - world Position3D of the click in format [x,y,0] (same as _pos param)
alt: Boolean - true if Alt key was pressed (same as _alt param)
shift: Boolean - true if Shift key was pressed (same as _shift param)

2.02

4

Executes when a marker is created either by a user or via script command.

addMissionEventHandler ["MarkerCreated", {
	params ["_marker", "_channelNumber", "_owner", "_local"];
}];

marker: String - The name of the created marker, can be used with the marker commands
channelNumber: Number - Channel in which the marker was created
owner: Object - Player that created the marker or objNull
2.04 local: Boolean - true if the event originated locally, false if it came over the network

2.02

4

Executes when a marker is deleted either by a user or via script command.

addMissionEventHandler ["MarkerDeleted", {
	params ["_marker", "_local"];
}];

marker: String - The name of the deleted marker
2.04 local: Boolean - true if the event originated locally, false if it came over the network

2.02

4

Executes when a marker is changed.

⚠

Changing the marker in the EH code will lead to an infinite loop and the game will crash!

addMissionEventHandler ["MarkerUpdated", {
	params ["_marker", "_local"];
}];

marker: String - The name of the marker
2.04 local: Boolean - true if the event originated locally, false if it came over the network

1.58 SEServer

4

Executes assigned code when client joins the mission in MP. Stackable version of onPlayerConnected.

addMissionEventHandler ["PlayerConnected",
{
	params ["_id", "_uid", "_name", "_jip", "_owner", "_idstr"];
}];

id: Number - unique DirectPlay ID (very large number). It is also the same id used for user placed markers (same as _id param)
uid: String - getPlayerUID of the joining client. The same as Steam ID (same as _uid param)
name: String - profileName of the joining client (same as _name param)
jip: Boolean - didJIP of the joining client (same as _jip param)
owner: Number - owner id of the joining client (same as _owner param)
idstr: String - same as id but in string format, so could be exactly compared to user marker ids

If dedicated server was started without '-autoInit' option and this EH was created on server, on first GUI client this EH also fires against server, but after first client. In mission's initServer.sqf:

handlercon = addMissionEventHandler ["PlayerConnected",
{
	diag_log "Client connected";
	diag_log _this;
}];

In RPT:

2016/12/16, 15:39:09 "Client connected"
2016/12/16, 15:39:09 [1.51343e+009,"7xxxxxxxxxxxxxxx1","longbow",false,3,"1513430065"]
2016/12/16, 15:39:34  Mission id: 5071d20b183e9580d0ee4f95f413ca18681d6165
2016/12/16, 15:39:34 "Client connected"
2016/12/16, 15:39:34 [2,"","__SERVER__",false,2,"2"]

That happens only for GUI clients, if HC client connects first, EH does not fire for server.
If dedicated server was started with -autoInit option, this EH does not fire against server, only for future clients, and all further clients appear to be JIPped.
Interesting moment for headless clients, for headless clients instead of getPlayerUID, handler gets string like "HC12160", where '12160' is headless client process ID (matches HC's PID observed in windows task manager)

1.58 SEServer

4

Executes assigned code when client leaves the mission in MP. Stackable version of onPlayerDisconnected.

addMissionEventHandler ["PlayerDisconnected",
{
	params ["_id", "_uid", "_name", "_jip", "_owner", "_idstr"];
}];

id: Number - unique DirectPlay ID (very large number). It is also the same id used for user placed markers (same as _id param)
uid: String - getPlayerUID of the leaving client. The same as Steam ID (same as _uid param)
name: String - profileName of the leaving client (same as _name param)
jip: Boolean - didJIP of the leaving client (same as _jip param)
owner: Number - owner id of the leaving client (same as _owner param)
idstr: String - same as id but in string format, so could be exactly compared to user marker ids

1.66

4

Fired on player view change. Player view changes when player is changing body due to teamSwitch, gets in out of a vehicle or operates UAV for example.

addMissionEventHandler ["PlayerViewChanged", {
	params [
		"_oldUnit", "_newUnit", "_vehicle",
		"_oldCamera", "_newCamera", "_uav"
	];
}];

oldBody: Object - player body before EH fired
newBody: Object - player body after EH fired
vehicleIn: Object - vehicle player is in (objNull if not in vehicle)
oldCameraOn: Object - cameraOn before EH fired
newCameraOn: Object - cameraOn after EH fired
UAV: Object - UAV reference if player is operating one (objNull if not operating UAV)

1.58

4

Executes assigned code before the mission preload screen. Stackable version of onPreloadStarted.

⚠

This event handler also fires on client after user closes the main map.

addMissionEventHandler ["PreloadStarted", {
	// no params
}];

1.58

4

Executes assigned code after the mission preload screen. Stackable version of onPreloadFinished.

⚠

This event handler also fires on client after user closes the main map.

addMissionEventHandler ["PreloadFinished", {
	// no params
}];

SelectedActionPerformed

RTM helicopter user action event

addMissionEventHandler ["SelectedActionPerformed", {
	params ["_caller", "_target", "_enumNumber", "_actionId"];
}];

⚠

Limited or non-existent functionality

SelectedActionChanged

RTM helicopter user action event

addMissionEventHandler ["SelectedActionChanged", {
	params ["_caller", "_target", "_enumNumber", "_actionId"];
}];

⚠

Limited or non-existent functionality

SelectedRotorLibActionPerformed

RTM helicopter user action event

addMissionEventHandler ["SelectedRotorLibActionPerformed", {
	params ["_caller", "_target", "_enumNumber", "_actionId"];
}];

⚠

Works only for key press combination RightCtrl + W, which is the binding for helicopter wheels brakes. It fires with or without Advanced Flight Model enabled. The enum number returned is 4 and 5, probably because the enum is structured like this:

0: HelicopterAutoTrimOn
1: HelicopterAutoTrimOff
2: HelicopterTrimOn
3: HelicopterTrimOff
4: WheelsBrakeOn

5: WheelsBrakeOff

SelectedRotorLibActionChanged

RTM helicopter user action event

addMissionEventHandler ["SelectedRotorLibActionChanged", {
	params ["_caller", "_target", "_enumNumber", "_actionId"];
}];

⚠

Limited or non-existent functionality

1.58

4

Executes assigned code when player teamswitches. Stackable version of onTeamSwitch.

addMissionEventHandler ["TeamSwitch", {
	params ["_previousUnit", "_newUnit"];
}];

previousUnit: Object - switching from unit (same as _from param)
newUnit: Object - switching to unit (same as _to param)

Mission Event Handlers – Arma 3

Description

Related Commands

Events

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

SelectedActionPerformed

SelectedActionChanged

SelectedRotorLibActionPerformed

SelectedRotorLibActionChanged

4

Navigation menu

Search