ⓘ

This page is an intended replacement for Code Optimisation. It is obviously a WORK-IN-PROGRESS.

Code Optimisation

Introduction

This article will try to be a general guide about improving your code and its performance.

The first part (Rules) will focus on having a clean, readable and maintainable code.
The second part (Code optimisation) is about improving performance, sometimes trading it against code readability.
The third part (Equivalent commands performance) mentions commands that in appearance have identical effects but may differ in terms of performance according to the use you may have of them.
The fourth part (Conversion from earlier versions) is a hopefully helpful, short guide about useful new commands or syntaxes to replace the old ways.

Color code

means you must change your ways today, or with us you will ride…
means you may want to look at it if you are targeting pure performance
means the gain is little to unsignificant. Going through your code looking for this replacement is not worth it, but future code should be written this way.

Rules

In the domain of development, any rule is a rule of thumb. If a rule states for example that it is better that a line of code doesn't go over 80 characters, it doesn't mean that any line must not go over 80 characters; sometimes, the situation needs it. If you have a good structure, do not change your code to enforce a single arbitrary rule. If you break many of them, you may have to change something. Again, this is according to your judgement.

With that being said, here are the three basic rules to get yourself in the clear:

Make it work
Make it readable
Optimise then

Make it work

Your first goal when coding is to make your code do what you want it does. A good way to reach this objective is to read and getting inspired by other people's code. If you understand it by reading it once, it is probably a good source of inspiration.
When starting from scratch if you know what you want but miss the specific steps to get to your point, it is a good practice to write down in your native language what you want to do. E.g Get all the units near the city, and for each west soldier in them, add damage.

Make it readable

Whether you are cleaning your code or a different person's, you must understand the code without twisting your brain:

While SQF is impacted by variable name length, this should not take precedence on the fact that code must be readable by a human being. Variables like _u instead of _uniform should not be present.
One-lining (putting everything in one statement) memory improvement is most of the time not worth the headache it gives when trying to read it. Don't overuse it.
Indentation is important for the human mind, and space is too. Space is free, use it.
Same goes for line return; it helps to see a code block wrapping multiple
Do you see the same code multiple times, only with different parameters? Now is the time to write a function!
Is your function code far too long? Split it in understandable-sized bites, for your own sanity.
Finally, camel-casing (namingLikeThis) your variables and commands will naturally make the code more readable, especially for long names.

ⓘ

_i is an accepted variable standard for a for..do iteration

See the following code: _w=[]; {_w pushbackunique primaryweapon _x} foreach((allunits+alldeadmen) select{_x call bis_fnc_objectside==east});

The same example is far more readable with proper spacing, good variable names and intermediate results: _weaponNames = []; _allUnitsAliveAndDead = allUnits + allDeadMen; _allEastAliveAndDead = _allUnitsAliveAndDead select { _x call BIS_fnc_objectSide == east }; { _weaponNames pushBackUnique primaryWeapon _x } forEach _allEastAliveAndDead;

if you have a lot of if..else, you may want to look at a switch condition, or again break your code in smaller functions.

Optimise then

Once you know what is what, you can understand your code better.

You were iterating multiple times on the same array?
- You should be able to spot your issue now.
Are you using execVM on the same file, many times?
- Store your function in memory to avoid file reading every call with _myFunction = compile preprocessFileLineNumbers "myFile.sqf";
Is your function code far too long?
- Split it in understandable-sized bites, for your own sanity.
Is your variable name far too long?
- Find a smaller name, according to the variable scope:

e.g

{ _opforUnitUniform = uniform _x; systemChat _opforUnitUniform; } forEach _allOpforUnits;

becomes

{ _uniform = uniform _x; systemChat _uniform; } forEach _allopforUnits;

Code optimisation

Lazy evaluation

private _myVar = if (false) then { 33; } else { 66; }; 	 	 	 	 	 	// 0.0020 ms
private "_myVar"; if (false) then { _myVar = 33; } else { _myVar = 66; }; 	// 0.0025 ms

Successive condition check

In SQF the following code will check all and every condition, even if one fail:

if (condition1 && condition2 && condition3) then { /* thenCode */ };

This code will check condition1, and if it is not true condition2 and condition3 will execute anyway. To avoid this behaviour, you can either imbricate ifs or use lazy evaluation such as the following:

if (condition1 && { condition2 } && { condition3 }) then { /* thenCode */ };

This method will stop condition evaluation on the first false statement.

Using lazy evaluation is not always the best way as it could speed up the code as well as slow it down, depending on the current condition being evaluated:

["true  || {{false} || {false}}", nil, 100000] call BIS_fnc_codePerformance;	// 0.00080 ms
["true  ||  {false} || {false }", nil, 100000] call BIS_fnc_codePerformance;	// 0.00105 ms
["false ||   false  ||  false  ", nil, 100000] call BIS_fnc_codePerformance;	// 0.00123 ms
["true  ||   false  ||  false  ", nil, 100000] call BIS_fnc_codePerformance;	// 0.00128 ms
["false ||  {false} || {false} ", nil, 100000] call BIS_fnc_codePerformance;	// 0.00200 ms

Concatenating multiple small strings together

myString = myString + otherString works fine for small strings, however the bigger the string gets the slower the operation becomes:

myString = ""; for "_i" from 1 to 10000 do { myString = myString + "123" }; // 290 ms

The solution is to use a string array that you will concatenate later:

strings = [];
for "_i" from 1 to 10000 do {strings pushBack "123"};
strings = strings joinString ""; // 30 ms

Multiplayer recommendations

TODO

no publicVariable or public setVariable at high frequency
the server is supposed to have a lot of memory, use it
variable name length impacts network?

createSimpleObject vs createVehicle

TODO create at [0,0,0]

Equivalent commands performance

if

if..then { /* thenCode */ };							// fastest
if..exitWith { /* exitCode */ };						// fast
if..then { /* thenCode */ } else { /* elseCode */ };	// normal
if..then [{ /* thenCode */ },{ /* elseCode */ }]		// normal

Both if..then { /* thenCode */ } else { /* elseCode */ };
and if..then [{ /* thenCode */ }, { /* elseCode */ }];
have the same performance.

for

The for..from..to..do is twice as fast as its alternative syntax, for..do.

for "_i" from 0 to 10 do { /* forCode */ };						// 0.015 ms
for [{_i = 0}, {_i < 100}, {_i = _i + 1}] do { /* forCode */ };	// 0.030 ms

forEach vs count

Both commands will step through supplied array of elements one by one and both commands will contain reference to current element in the _x variable. However, count loop is a little faster than forEach loop, but it does not have _forEachIndex variable.
Also, there is a limitation as the code inside count expects Boolean or Nothing while itself returns Number.

{diag_log _x} count [1,2,3,4,5]; // 0.082 ms {diag_log _x} forEach [1,2,3,4,5]; // 0.083 ms

Usage: _someoneIsNear = {_x distance [0,0,0] < 1000} count allUnits > 0;

_someoneIsNear = {
	if (_x distance [0,0,0] < 1000) exitWith { true };
	false
} forEach allUnits;

findIf (since Arma 3 v1.82) stops array iteration as soon as the condition is met.

[0,1,2,3,4,5,6,7,8,9] findIf { _x == 2 };				// 0.005 ms
_quantity = { _x == 2 } count [0,1,2,3,4,5,6,7,8,9];	// 0.0114 ms

+ and format

When concatenating more than two strings, format is faster than +. Use:

format ["%1%2%3%4%5", "string1", "string2", "string3", "string4", "string5"]; // faster

Instead of:

"string1" + "string2" + "string3" + "string4" + "string5"; // slower

select and if

Use [[Inline code|[array] select Boolean}} instead of the lazy-evaluated if.

_result = ["false result", "true result"] select true;					// 0.0011 ms
_result = if (true) then { "true result"; } else { "false result"; };	// 0.0017 ms

private

Direct declaration (private _var = value since Arma 3 v1.53) is faster than declaring then assigning the variable.

private _a = 1;
private _b = 2;
private _c = 3;
private _d = 4; 
// 0.0023 ms

private ["_a", "_b", "_c", "_d"];
_a = 1;
_b = 2;
_c = 3;
_d = 4; 
// 0.0040 ms

However, if you have to reuse the same variable in a loop, external declaration is faster.
The reason behind this is that a declaration in the loop will create, assign and delete the variable in each loop.
An external declaration creates the variable only once and the loop only assigns the value.

for "_i" from 1 to 100 do
{
	private _a = 1; private _b = 2; private _c = 3; private _d = 4;
};
// 0.186776 ms

private ["_a", "_b", "_c", "_d"];
for "_i" from 1 to 100 do
{
	_a = 1;
	_b = 2;
	_c = 3;
	_d = 4;
};
// 0.146327 ms

objectParent and vehicle

isNull objectParent player // 0.0013 ms, slightly faster vehicle player == player // 0.0022 ms

nearEntities and nearestObjects

nearEntities is much faster than nearestObjects given on range and amount of object(s) which are within the given range.

If a range was set to more thean 100 meters it is highly recommend to use nearEntities instead of nearestObjects.

Note: nearEntities only searches for objects which are alive. Killed units, destroyed vehicles, static objects and buildings will be ignored by the nearEntities command.

Config path delimiter

>> is slightly faster than / when used in config path with configFile or missionConfigFile:

configFile >> "CfgVehicles" // 0.0019 ms

is (very slighlty) faster than

configFile / "CfgVehicles" // 0.0023 ms

getPos* and setPos*

getPosWorld			// 0.0015 ms
getPosASL			// 0.0016 ms
getPosATL			// 0.0016 ms
getPos				// 0.0020 ms
position			// 0.0020 ms
getPosVisual		// 0.0021 ms
visiblePosition		// 0.0021 ms
getPosASLW			// 0.0023 ms

setPosWorld			// 0.0060 ms
setPosASL			// 0.0060 ms
setPosATL			// 0.0060 ms
setPos				// 0.0063 ms
setPosASLW			// 0.0068 ms
setVehiclePosition	// 0.0077 ms with "CAN_COLLIDE"
					// 0.0390 ms with "NONE"

Conversion from earlier versions

Each iteration of Bohemia games (Operation Flashpoint, Arma, Arma 2, Take On Helicopters, Arma 3) brought their own new commands, especially Arma 2 and Arma 3.
For that, if you are converting scripts from older versions of the engine, some aspects should be reviewed:

Loops

forEach loops, depending on the situation, can be replaced by:
- apply
- count
- findIf
- select

Array operations

Adding an item: myArray + [element] and myArray set [count myArray, element] have been replaced by pushBack
Selecting a random item: BIS_fnc_selectRandom has been replaced by selectRandom
Removing items: myArray set [1, objNull]; myArray - [objNull] has been replaced by deleteAt and deleteRange
Concatenating: myArray = myArray + [element] has been reinforced with append: if you don't need the original array to be modified, use +
Comparing: use isEqualTo instead of BIS_fnc_areEqual or a custom comparison function
- count myArray == 0 is pretty fast, but direct comparison with isEqualTo is still a little faster: myArray isEqualTo []
Finding common items: in forEach loop has been replaced by arrayIntersect
Condition filtering: forEach can be replaced by select (alternative syntax)

result = []; { if (_x % 2 == 0) then { result pushBack _x; }; } forEach arrayOfNumbers; // 2.57 ms

result = (arrayOfNumbers select { _x % 2 == 0 }); // 1.55 ms

String operations

String manipulation has been simplified with the following commands:

string select index
toArray and toString have been reinforced with splitString and joinString

Multiplayer

BIS_fnc_MP has been replaced by remoteExec and remoteExecCall. Use them!

Lou Montana/Sandbox – User

Code Optimisation

Contents

Introduction

Color code

Rules

Make it work

Make it readable

Optimise then

Code optimisation

Lazy evaluation

Successive condition check

Concatenating multiple small strings together

Multiplayer recommendations

createSimpleObject vs createVehicle

Equivalent commands performance

if

for

forEach vs count

+ and format

select and if

private

objectParent and vehicle

nearEntities and nearestObjects

Config path delimiter

getPos* and setPos*

Conversion from earlier versions

Loops

Array operations

String operations

Multiplayer

Navigation menu

Lou Montana/Sandbox – User

Code Optimisation

Introduction

Color code

Rules

Make it work

Make it readable

Optimise then

Code optimisation

Lazy evaluation

Successive condition check

Concatenating multiple small strings together

Multiplayer recommendations

createSimpleObject vs createVehicle

Equivalent commands performance

if

for

forEach vs count

+ and format

select and if

private

objectParent and vehicle

nearEntities and nearestObjects

Config path delimiter

getPos* and setPos*

Conversion from earlier versions

Loops

Array operations

String operations

Multiplayer

Navigation menu

Search