Code Optimisation: Difference between revisions
Lou Montana (talk | contribs) (Add execVM / call and loadFile / preprocessFile / preprocessFileLineNumbers comparisons) |
Lou Montana (talk | contribs) m (→{{colorball|red|0.9}} execVM and call: Hide this unless proper comparison arises) |
||
| Line 204: | Line 204: | ||
[[player]] [[addEventHandler]] ["HandleDamage", { _this [[call]] my_fnc_damage }]; | [[player]] [[addEventHandler]] ["HandleDamage", { _this [[call]] my_fnc_damage }]; | ||
<!-- TODO: compare execVM and spawn, and/or waitUntil scriptDone / call | |||
=== {{colorball|red|0.9}} execVM and call === | === {{colorball|red|0.9}} execVM and call === | ||
| Line 226: | Line 227: | ||
[[execVM]] "myFile.sqf"; {{cc|0.275 ms}} | [[execVM]] "myFile.sqf"; {{cc|0.275 ms}} | ||
--> | |||
=== {{colorball|orange|0.9}} loadFile, preprocessFile and preprocessFileLineNumbers === | === {{colorball|orange|0.9}} loadFile, preprocessFile and preprocessFileLineNumbers === | ||
Revision as of 00:16, 10 September 2019
Introduction
This article will try to be a general guide about improving your code and its performance.
- The first part (Rules) will focus on having a clean, readable and maintainable code.
- The second part (Code optimisation) is about improving performance, sometimes trading it against code readability.
- The third part (Equivalent commands performance) mentions commands that in appearance have identical effects but may differ in terms of performance according to the use you may have of them.
- The fourth part (Conversion from earlier versions) is a hopefully helpful, short guide about useful new commands or syntaxes to replace the old ways.
Rules
In the domain of development, any rule is a rule of thumb. If a rule states for example that it is better that a line of code doesn't go over 80 characters, it doesn't mean that any line must not go over 80 characters; sometimes, the situation needs it. If you have a good structure, do not change your code to enforce a single arbitrary rule. If you break many of them, you may have to change something. Again, this is according to your judgement.
With that being said, here are the three basic rules to get yourself in the clear:
Make it work
Template:quote Your first goal when coding is to make your code do what you want it does. A good way to reach this objective is to read and getting inspired by other people's code. If you understand it by reading it once, it is probably a good source of inspiration.
- When starting from scratch if you know what you want but miss the specific steps to get to your point, it is a good practice to write down in your native language what you want to do. E.g Get all the units near the city, and for each west soldier in them, add 30% damage.
- Use -showScriptErrors startup parameter and make sure your code doesn't throw errors. Not only will your code run slower but it may also not work at all. Be sure to read the error, isolate the issue and sort it out thanks to this Wiki.
- Read your Arma RPT (report) to read more details about the error that happened in your code.
Make it readable
Whether you are cleaning your code or a different person's, you must understand the code without twisting your brain:
- While SQF is (non-noticeably) impacted by variable name length, this should not take precedence on the fact that code must be readable by a human being. Variables like _u instead of _uniform should not be present.
- One-lining (putting everything in one statement) memory improvement is most of the time not worth the headache it gives when trying to read it. Don't overuse it.
- Indentation is important for the human mind, and space is too. Space is free, use it.
- Same goes for line return; it helps to see a code block wrapping multiple common instructions instead of having to guess where it starts and stops.
- Do you see the same code multiple times, only with different parameters? Now is the time to write a function!
- If you have a lot of if..else, you may want to look at a switch condition, or again break your code in smaller functions.
- Is your function code far too long? Break it in understandable-sized bites for your own sanity.
- Finally, camel-casing (namingLikeThis) your variables will naturally make the code more readable, especially for long names.
See the following code:
_w=[]; {_w pushbackunique primaryweapon _x} foreach((allunits+alldeadmen) select{_x call bis_fnc_objectside==east});
The same example is far more readable with proper spacing, good variable names and intermediate results:
_weaponNames = [];
_allUnitsAliveAndDead = allUnits + allDeadMen;
_allEastAliveAndDead = _allUnitsAliveAndDead select { _x call BIS_fnc_objectSide == east };
{ _weaponNames pushBackUnique primaryWeapon _x } forEach _allEastAliveAndDead;
Constants
Using a hard-coded constant more than once? Use preprocessor directives rather than storing it in memory or cluttering your code with numbers. Such as:
a = _x + 1.053; b = _y + 1.053;
And
_buffer = 1.053; a = _x + _buffer; b = _y + _buffer;
Becomes
#define BUFFER 1.053 // note: no semicolon _a = _x + BUFFER; _b = _y + BUFFER;
Global "constants" can be defined via a Description.ext declaration, though, and accessed using getMissionConfigValue command:
Declaration in Description.ext:
var1 = 123;
var2 = "123";
var3[] = {1,2,3};
rand = __EVAL(random 999);
Usage in code:
hint str getMissionConfigValue "var1"; // 123 // 0.0007 ms hint str getMissionConfigValue "var2"; // "123" // 0.0008 ms hint str getMissionConfigValue "var3"; // [1,2,3] // 0.0017 ms hint str getMissionConfigValue "rand"; // constant random, for example 935.038 // 0.0007 ms
The getMissionConfigValue command searching Description.ext from top to bottom, it is better for a matter of performance to put all your definitions at the top of the file.
Optimise then
Once you know what is what, you can understand your code better.
- Use private variables instead of global variables (preceded with an underscore) as much as possible
- You were iterating multiple times on the same array?
- You should be able to spot your issue now.
- Are you using execVM on the same file, many times?
- Store your function in memory to avoid file reading every call with
_myFunction = compile preprocessFileLineNumbers "myFile.sqf";
- Store your function in memory to avoid file reading every call with
- Is your variable name far too long?
- Find a smaller name, according to the variable scope:
e.g
{ _opforUnitUniform = uniform _x; systemChat _opforUnitUniform; } forEach _allOpforUnits;
becomes
{ _uniform = uniform _x; systemChat _uniform; } forEach _allOpforUnits;
Code optimisation
1.82 with Tank DLC. Game engine performance may have changed since.Benchmark result in milliseconds (ms) is an average for 10000 iterations.
Scheduled and unscheduled environment
There are two code environment types, scheduled and unscheduled.
- A scheduled script has an execution time limit of 3 ms before being suspended to the benefit of another script until its turn comes back. It is a bit slower than unscheduled but suspending (sleep, waitUntil) is allowed.
- An unscheduled script is not watched and will run without limitations. It is recommended for time-critical scripts, but suspending (sleep, waitUntil) is not allowed!
Template:colorball Lazy evaluation
private _myVar = [33, 66] select (false); // 0.0013 ms private _myVar = if (false) then { 33; } else { 66; }; // 0.0020 ms private "_myVar"; if (false) then { _myVar = 33; } else { _myVar = 66; }; // 0.0025 ms
Template:colorball Successive condition check
In SQF the following code will check all and every conditions, even if one fails:
if (condition1 && condition2 && condition3) then { /* thenCode */ };
This code will check condition1, and if it is not true condition2 and condition3 will execute anyway. To avoid this behaviour, you can either imbricate ifs or use lazy evaluation such as the following:
if (condition1 && { condition2 } && { condition3 }) then { /* thenCode */ };
This method will stop condition evaluation on the first false statement.
Using lazy evaluation is not always the best way as it could speed up the code as well as slow it down, depending on the current condition being evaluated:
["true || { false || {false}}", nil, 100000] call BIS_fnc_codePerformance; // 0.00080 ms ["true || {false} || {false} ", nil, 100000] call BIS_fnc_codePerformance; // 0.00105 ms ["false || false || false ", nil, 100000] call BIS_fnc_codePerformance; // 0.00123 ms ["true || false || false ", nil, 100000] call BIS_fnc_codePerformance; // 0.00128 ms ["false || {false} || {false} ", nil, 100000] call BIS_fnc_codePerformance; // 0.00200 ms
Template:colorball Concatenating multiple small strings together
myString = myString + otherString works fine for small strings, however the bigger the string gets the slower the operation becomes:
myString = ""; for "_i" from 1 to 10000 do { myString = myString + "123" }; // 290 ms
The solution is to use a string array that you will concatenate later:
strings = []; for "_i" from 1 to 10000 do {strings pushBack "123"}; strings = strings joinString ""; // 30 ms
Template:colorball Manipulating arrays
Adding elements
New commands append and pushBack hold the best score.
_array = [0,1,2,3]; _array append [4,5,6]; // 0.0020 ms _array = [0,1,2,3]; _array = _array + [4,5,6]; // 0.0023 ms _array = [0,1,2,3]; { _array set [count _array, _x]; } forEach [4,5,6]; // 0.0080 ms
_array = [0,1,2,3]; _array pushBack 4; // 0.0016 ms _array = [0,1,2,3]; _array = _array + [4]; // 0.0021 ms _array = [0,1,2,3]; _array set [count _array, _x]; // 0.0022 ms
Removing elements
_array = [0,1,2,3]; _array deleteAt 0; // 0.0015 ms _array = [0,1,2,3]; _array set [0, objNull]; _array = _array - [objNull]; // 0.0038 ms
_array = [0,1,2,3]; _array deleteRange [1, 2]; // 0.0018 ms _array = [0,1,2,3]; { _array set [_x, objNull] } forEach [1,2]; _array = _array - [objNull]; // 0.0078 ms
Template:colorball Multiplayer recommendations
- Do not saturate the network with information: publicVariable or public setVariable shouldn't be used at high frequency, else everyone's performance experience is at risk!
- The server is supposed to have a good CPU and a lot of memory, use it: store functions, run them from it, send only the result to the clients
- publicVariable and setVariable variable name length impacts network, be sure to send well-named, understandable variables
(and not playerNameBecauseThePlayerIsImportantAndWeNeedToKnowWhoTheyAreAllTheTimeEspeciallyInsideThisImpressiveFunction) - Use, use and use remoteExec & remoteExecCall. Ditch BIS_fnc_MP for good!
Equivalent commands performance
Template:colorball call
call without arguments is faster than call with arguments:
call {}; // 0.0007 ms 123 call {}; // 0.0013 ms
Since the variables defined in the parent scope will be available in the called child scope, it could be possible to speed up the code by avoiding passing arguments all together, for example writing:
player addEventHandler ["HandleDamage", { call my_fnc_damage }];
instead of:
player addEventHandler ["HandleDamage", { _this call my_fnc_damage }];
Template:colorball loadFile, preprocessFile and preprocessFileLineNumbers
// myFile.sqf is an empty file loadFile "myFile.sqf"; // 0.219 ms preprocessFile "myFile.sqf"; // 0.353 ms preprocessFileLineNumbers "myFile.sqf"; // 0.355 ms
// myFile.sqf is BIS_fnc_showRespawnMenu loadFile "myFile.sqf"; // 0.3516 ms preprocessFile "myFile.sqf"; // 2.75 ms preprocessFileLineNumbers "myFile.sqf"; // 2.73 ms
// myFile.sqf is a missing file loadFile "myFile.sqf"; // 0.692 ms preprocessFile "myFile.sqf"; // 0.6225 ms preprocessFileLineNumbers "myFile.sqf"; // 0.6225 ms
Template:colorball if
if..then { /* thenCode */ }; // 0.0011 ms if..exitWith { /* exitCode */ }; // 0.0014 ms if..then { /* thenCode */ } else { /* elseCode */ }; // 0.0015 ms if..then [{ /* thenCode */ }, { /* elseCode */ }] // 0.0016 ms
Template:colorball if and select
Use [array] select Boolean instead of the lazy-evaluated if.
_result = ["false result", "true result"] select true; // 0.0011 ms _result = if (true) then { "true result"; } else { "false result"; }; // 0.0017 ms
Template:colorball if and switch
_result = call { if (false) exitWith {}; if (false) exitWith {}; if (true) exitWith {}; if (false) exitWith {}; if (false) exitWith {}; }; // 0.0032 ms
_result = switch (true) do { case (false): {}; case (false): {}; case (true) : {}; case (false): {}; case (false): {}; }; // 0.0047 ms
Template:colorball for
The for..from..to..do is twice as fast as its alternative syntax, for..do.
for "_i" from 0 to 10 do { /* forCode */ }; // 0.015 ms for [{_i = 0}, {_i < 100}, {_i = _i + 1}] do { /* forCode */ }; // 0.030 ms
Template:colorball forEach vs count vs findIf
Both forEach and count commands will step through all the array elements and both commands will contain reference to current element with the _x variable.
However, count loop is a little faster than forEach loop, but it does not benefit from the _forEachIndex variable.
Also, there is a limitation as the code inside count expects Boolean or Nothing while the command itself returns Number.
This limitation is very important if you try to replace your forEach by count. If you have to add a extra true/false/nil at the end to make count work, it will be slower than the forEach equivalent.
{ diag_log _x } count [1,2,3,4,5]; // 0.082 ms
{ diag_log _x } forEach [1,2,3,4,5]; // 0.083 ms
// with an empty array _someoneIsNear = (allUnits findIf { _x distance [0,0,0] < 1000 }) != -1; // 0.0046 ms _someoneIsNear = { _x distance [0,0,0] < 1000 } count allUnits > 0; // 0.0047 ms _someoneIsNear = { if (_x distance [0,0,0] < 1000) exitWith { true }; false } forEach allUnits; // 0.0060 ms
// with a 30 items array _someoneIsNear = (allUnits findIf { _x distance [0,0,0] < 1000 }) != -1; // 0.0275 ms _someoneIsNear = { _x distance [0,0,0] < 1000 } count allUnits > 0; // 0.0645 ms _someoneIsNear = { if (_x distance [0,0,0] < 1000) exitWith { true }; false } forEach allUnits; // 0.0390 ms
Template:colorball findIf
findIf stops array iteration as soon as the condition is met.
[0,1,2,3,4,5,6,7,8,9] findIf { _x == 2 }; // 0.0050 ms { if (_x == 2) exitWith { _forEachIndex; }; } forEach [0,1,2,3,4,5,6,7,8,9]; // 0.0078 ms _quantity = { _x == 2 } count [0,1,2,3,4,5,6,7,8,9]; // 0.0114 ms
Template:colorball + and format
When concatenating more than two strings, format is faster than +.
format ["%1%2%3%4%5", "string1", "string2", "string3", "string4", "string5"]; // 0.0019 ms "string1" + "string2" + "string3" + "string4" + "string5"; // 0.0021 ms
Template:colorball format and str
str 33; // 0.0016 ms format ["%1", 33]; // 0.0022 ms
Template:colorball private
Direct declaration (private _var = value) is faster than declaring then assigning the variable.
private _a = 1; private _b = 2; private _c = 3; private _d = 4; // 0.0023 ms
private ["_a", "_b", "_c", "_d"]; _a = 1; _b = 2; _c = 3; _d = 4; // 0.0040 ms
However, if you have to reuse the same variable in a loop, external declaration is faster.
The reason behind this is that a declaration in the loop will create, assign and delete the variable in each loop.
An external declaration creates the variable only once and the loop only assigns the value.
private ["_a", "_b", "_c", "_d"]; for "_i" from 1 to 10 do { _a = 1; _b = 2; _c = 3; _d = 4; }; // 0.0195 ms
for "_i" from 1 to 10 do { private _a = 1; private _b = 2; private _c = 3; private _d = 4; }; // 0.0235 ms
Template:colorball isNil
isNil "varName"; // 0.0007 ms isNil {varName}; // 0.0012 ms
Template:colorball isEqualType and typeName
isEqualType is much faster than typeName
"string" isEqualType 33; // 0.0006 ms typeName "string" == typeName 33; // 0.0018 ms
Template:colorball isEqualTo and count
// with a items array allUnits isEqualTo []; // 0.0040 ms count allUnits == 0; // 0.0043 ms
Template:colorball select and param
[1,2,3] select 0; // 0.0008 ms [1,2,3] param [0]; // 0.0011 ms
Template:colorball objectParent and vehicle
isNull objectParent player; // 0.0013 ms vehicle player == player; // 0.0022 ms
Template:colorball nearEntities and nearestObjects
nearEntities is much faster than nearestObjects given on range and amount of objects within the given range. If range is over 100 meters it is highly recommended to use nearEntities over nearestObjects.
// tested with a NATO rifle squad amongst solar power plant panels on Altis at coordinates [20762,15837] getPosATL player nearEntities [["Man"], 50]; // 0.0075 ms nearestObjects [getPosATL player, ["Man"], 50]; // 0.0145 ms
Template:colorball Global variables vs local variables
If you need to use global variable repeatedly in a loop, copy its value to local variable and use local variable instead:
SomeGlobalVariable = [123];
for "_i" from 1 to 100 do
{
SomeGlobalVariable select 0;
};
// 0.13 ms
is noticeably slower than
SomeGlobalVariable = [123];
private _var = SomeGlobalVariable;
for "_i" from 1 to 100 do
{
_var select 0;
};
// 0.08 ms
Template:colorball Config path delimiter
>> is slightly faster than / when used in config path with configFile or missionConfigFile.
configFile >> "CfgVehicles"; // 0.0019 ms configFile / "CfgVehicles"; // 0.0023 ms
Template:colorball getPos* and setPos*
getPosWorld // 0.0015 ms getPosASL // 0.0016 ms getPosATL // 0.0016 ms getPos // 0.0020 ms position // 0.0020 ms getPosVisual // 0.0021 ms visiblePosition // 0.0021 ms getPosASLW // 0.0023 ms
setPosWorld // 0.0060 ms setPosASL // 0.0060 ms setPosATL // 0.0060 ms setPos // 0.0063 ms setPosASLW // 0.0068 ms setVehiclePosition // 0.0077 ms with "CAN_COLLIDE" // 0.0390 ms with "NONE"
Template:colorball toLower and toLowerANSI
// _myString is a 100 chars "aAaAaA(…)" string toLower _myString; // 0.0016 ms toLowerANSI _myString; // 0.0006 ms
Conversion from earlier versions
Each iteration of Bohemia games (Operation Flashpoint, Arma, Arma 2, Take On Helicopters, Arma 3) brought their own new commands, especially Arma 2 and Arma 3.
For that, if you are converting scripts from older versions of the engine, the following aspects should be reviewed.
Loops
Array operations
- Adding an item:
myArray + [element]andmyArray set [count myArray, element]have been replaced by pushBack - Selecting a random item: BIS_fnc_selectRandom has been replaced by selectRandom
- Removing items:
myArray set [1, objNull]; myArray - [objNull]has been replaced by deleteAt and deleteRange - Concatenating:
myArray = myArray + [element]has been reinforced with append: if you don't need the original array to be modified, use + - Comparing: use isEqualTo instead of BIS_fnc_areEqual
- Finding common items: in forEach loop has been replaced by arrayIntersect
- Condition filtering: forEach can be replaced by select (alternative syntax)
result = (arrayOfNumbers select { _x % 2 == 0 }); // 1.55 ms
result = [];
{
if (_x % 2 == 0) then { result pushBack _x; };
} forEach arrayOfNumbers; // 2.57 ms
String operations
String manipulation has been simplified with the following commands:
- alternative syntax for select:
string select index - toArray and toString have been reinforced with splitString and joinString
Number operations
- BIS_fnc_linearConversion has been replaced by linearConversion. The command is 9 times faster.
- BIS_fnc_selectRandomWeighted has been replaced by selectRandomWeighted. The command is 7 times faster.
Type comparison
- typeName has been more than reinforced with isEqualType.
Multiplayer
- BIS_fnc_MP has been replaced by remoteExec and remoteExecCall and internally uses them. Use the engine commands from now on!
Parameters
- BIS_fnc_param has been replaced by param and params. The commands are approximately 14 times faster. Use them!